Question about Cars & Trucks

1 Answer

Hi, Ineed a front brake caliper for ma XT500E, originally a 2 piston nissin. Is there an alternative? Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 191 Answers

Looks like that is all that is out there.

Posted on Aug 09, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
keeperoffire
  • 106 Answers

SOURCE: i have an 06 hyundai tiburon gt v6 and im

On cars with 4 wheel disc brakes the rear calipers are what they call racheting.The pison needs to be turned clockwise at the same time you are pushing in.This mechanisum is for the E brake system.They make special tools for doing this that you can pick up at your local parts store.

Posted on Mar 04, 2009

  • 316 Answers

SOURCE: changing the brake pads and can't depress caliper piston

Use a large "C" clamp, or a large pair of channellocks.

Posted on May 30, 2009

fingaz22
  • 1068 Answers

SOURCE: Changing the front brake pads on a 2006 Pontiac Montana SV6

no that is only the older rear calipers on gm and others. the fronts do not have that style caliper and sound like the calipers are frozen and may be way your changing the pads. try opening the bleeder screw and then compressing them if they go then you need need brake hoses and if not you need calipers. god luck man

Posted on Dec 13, 2009

roniecon
  • 6826 Answers

SOURCE: 2006 Kia Spectra 5 rear brake disc replacement

One side,turns right,and push in slightly,and the other side turns left,to retract.

Posted on Apr 20, 2010

  • 972 Answers

SOURCE: 2006 Kia Spectra 5 rear brake disc replacement

you need a special tool avalable at most parts stores. its a disc brake piston turning tool. you have to rotate piston clockwise while pushing in on piston. you can fabricate something that enguages the slots and push and turn till all the way in.make sure to note position of slots and put them in same place as was before or the pin on the pads wont enguage the slot

Posted on May 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi how are u doing how could i replace front brakes on my 2006 hyundia tucson thanks


Jack up vehicle, remove wheel, take out bolts holding caliper on. Push piston of caliper in all the way with screwdriver or pry bar. Remove caliper, only doing one at a time as to not push piston of opposite caliper out. Pull caliper out of position, remove and replace brake pads. Install and bolt on caliper, repeat steps for other side. Pump up brakes to get pads against rotors, put wheels on and take for test drive.

Mar 30, 2015 | 2006 Hyundai Tucson

1 Answer

Left front brakes stuckes


caliper may be sticking this will require over haul (new seals maybe pistons) do both calipers as a pair or you may find brakes will drag to the right if you only do left side I've found this out the hard way

Jun 01, 2012 | 2000 Volvo S40

1 Answer

What size allen wrench do i need for the front brake calipers


For front brake pads replacement you only need usually wrench set, inclusive 7 mm allen key also. But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake automatic adjustment!!!
Instructions for front brake pads replacement.
For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow:
1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose!
2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper.
3. Now you must thoroughly clean the brake calipers (free of grease).
4. Remove outer brake pad from brake carrier.
5. Pull inner brake pad out of brake caliper piston.
6. Check up the brake fluid level on the reservor, and emptying if neccessary!
7. Push piston back into brake caliper housing.
8. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward).
9. Install outer brake pad into brake carrier.
10. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm.
11. Install both caps.
12. Insert retaining spring into brake caliper housing.

Important note: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!!
Check brake fluid level and top up as neccessary!

Sep 03, 2011 | 1994 Audi 100

1 Answer

Need help changing brake pads and routers on 2003


Remove brake fluid from the master cylinder brake fluid reservoir until the reservoir is approximately 1/2 full. Discard the removed fluid.
  1. Raise and safely support the front of the vehicle. Remove the front wheels.
    1. Remove or disconnect the following:
    2. Front brake caliper guide pin bolts
    • Brake caliper by slowly sliding it up and off the adapter and brake rotor. Support the caliper out of the way with a strong piece of wire. Do not let the caliper hang by the brake hose or damage to the brake hose will result.
    1. If necessary, compress the caliper piston into the bore using a C-clamp. Insert a suitable piece of wood between the C-clamp and caliper piston to protect the piston.
    2. Outboard disc brake pad from the caliper by prying the brake pad retaining clip over the raised area on the caliper. Slide the brake pad down and off the caliper.
    • Inboard disc brake pad from the caliper by pulling the brake pad away from the caliper piston until the retaining clip on the pad is free from the caliper piston cavity
  • To install:
    1. Be sure the caliper piston has been completely retracted into the piston bore of the caliper assembly. This is required when installing the brake caliper equipped with new brake pads.
    2. If equipped, remove the protective paper from the noise suppression gaskets on the new disc brake pads.
    3. Install or connect the following:
      • New inboard disc brake pad into the caliper piston by pressing the pad firmly into the cavity of the caliper piston. Be sure the new inboard brake pad is seated squarely against the face of the brake caliper piston.
      • Outboard disc brake pad by sliding it onto the caliper assembly
      • Brake caliper assembly over the brake rotor and onto the steering knuckle adapter
      • Caliper guide pin bolts and torque to: 35 ft. lbs. (47 Nm) on 2002–04 models or 26 ft. lbs. (35 Nm) on 2005 models
      • Front. Apply the brake pedal several times until a firm pedal is obtained.
    4. Check the fluid level in the master cylinder and add fluid as necessary. Road-test the vehicle.

    For the rotors:

    1. Remove brake fluid from the master cylinder brake fluid reservoir until the reservoir is approximately 1/2 full. Discard the removed fluid.
    2. Raise and safely support the front of the vehicle. Remove the front wheels.
    1. Remove or disconnect the following:
    2. Front brake caliper guide pin bolts
    • Brake caliper by slowly sliding it up and off the adapter and brake rotor. Support the caliper out of the way with a strong piece of wire. Do not let the caliper hang by the brake hose or damage to the brake hose will result.
    1. If necessary, compress the caliper piston into the bore using a C-clamp. Insert a suitable piece of wood between the C-clamp and caliper piston to protect the piston.
    2. Outboard disc brake pad from the caliper by prying the brake pad retaining clip over the raised area on the caliper. Slide the brake pad down and off the caliper.
    • Inboard disc brake pad from the caliper by pulling the brake pad away from the caliper piston until the retaining clip on the pad is free from the caliper piston cavity
  • To install:
    1. Be sure the caliper piston has been completely retracted into the piston bore of the caliper assembly. This is required when installing the brake caliper equipped with new brake pads.
    2. If equipped, remove the protective paper from the noise suppression gaskets on the new disc brake pads.
    3. Install or connect the following:
      • New inboard disc brake pad into the caliper piston by pressing the pad firmly into the cavity of the caliper piston. Be sure the new inboard brake pad is seated squarely against the face of the brake caliper piston.
      • Outboard disc brake pad by sliding it onto the caliper assembly
      • Brake caliper assembly over the brake rotor and onto the steering knuckle adapter
      • Caliper guide pin bolts and torque to: 35 ft. lbs. (47 Nm) on 2002–04 models or 26 ft. lbs. (35 Nm) on 2005 models
      • Front. Apply the brake pedal several times until a firm pedal is obtained.
    4. Check the fluid level in the master cylinder and add fluid as necessary. Road-test the vehicle.

    May 28, 2010 | 2003 Chrysler Town & Country

    2 Answers

    Wat tool do i need to remove front and back brake calipers so i can replace brake pads on a audi a4 2002 2.0 se


    For front brake pads replacement you need only usually wrench set, inclusive 7 mm allen key also. But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake automatic adjustment!!! For front brake pads. First you must verify yours front brake disc diameter: 280 mm or 288 mm. (On my car y have 288 mm). After that you can buy the brake pads (with wear sensor). For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow: 1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose! 2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper. 3. Now you must thoroughly clean the brake calipers (free of grease). 4. Remove outer brake pad from brake carrier. 5. Pull inner brake pad out of brake caliper piston. 6. Check up the brake fluid level on the reservor, and emptying if neccessary! 7. Push piston back into brake caliper housing. 8. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward). 9. Install outer brake pad into brake carrier. 10. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm. 11. Install both caps. 12. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!! Please Rate my Response! Thanks!

    Aug 01, 2009 | 2002 Audi A4

    2 Answers

    How do i remove front pads from 89 probe?


    the caliper has 2 bolts holding it in.remove the bolts.slide off the caliper and replace the pads.you need to put a lubricant on the pads,and compress the pistons in all the way with a caliper piston tool,costs about 10 dollars.,or the new pads which are much thicker will not go on.also lube the bolts,known as slider pins or they can jam up.if there is brake pulsation you need to turn the rotors.to remove the rotors ,you need to remove the bracket that the caliper bolts to.there are 2 bolts holding on the bracket.then the rotor can come off to be turned.if the rotors are not thick enough after turning,,they need to be replaced

    Jul 13, 2009 | 1994 Ford Probe

    1 Answer

    Help-Ford E-350 Brake problem


    First, if the recall applies to your van, it can be done anytime. There is no time limit on recalls. Call your dealer with your 17 Digit VIN number and they can check. Please rate as solved if this is what you need. thanks.

    Here is the recall:

    Safety Recall 92S44 - Certain 1988-1991 F250/350 Trucks for Loss of Front Brake Effectiveness
    Affected Vehicles
    Certain 1988-1991 F250/350 trucks over 8500 lb GVW with 7.5L EFI or 7.3L diesel (4x2 and 4x4) and 5.8L EFI (4x4 only). Trucks under 8500 lb GVW. 5.8L EFI (4x2) and F-Super Duty light trucks are not involved in this recall. Specific vehicle information is as follows:

    AFFECTED VEHICLES ASSEMBLY PLANT PRODUCTION DATES F250/350 Norfolk Job#1 1988 to 4/18/91 Kansas City Job#1 1988 to 4/25/91 Ont. Truck Job#1 1988 to 5/1/91 Mich. Truck Job#1 1988 to 5/11/91 Twin Cities Job#1 1988 to 5/29/91
    Reasons For Recall
    In certain extremely severe driving conditions, the vehicle may experience a loss of front brake effectiveness due to overheating of brake fluid. These vehicles have a split brake system and the rear brakes remain operational. This condition has been reported primarily in vehicles operated in mountainous regions, and on vehicles that have been in service for a minimum of one to two years and where the brake fluid has absorbed moisture from the air, lowering its boiling point. It usually involves heavily loaded vehicles driving on long, steep grades, or when towing at, or near, the Maximum Gross Combination Weight Rating (GCWR) for towing. Warm weather also appears to contribute to this condition. To correct this condition, dealers will install insulators in the front brake caliper pistons on all the affected trucks. 7.5L EFI engine equipped trucks will also have insulation installed on selected portions of the front brake lines.
    -----------------------------------------------------------------------------------------
    PART NUMBER DESCRIPTION CLASS DEALER PRICE F2TZ-2C361-A Kit-Brake Caliper Piston Insulator (All Except 7.5L Engines) BG F2TZ-2C361-B Kit-Brake Tube Insulator Jacket (Required Only For Vehicles Equipped With 7.5L EFI Engines) Kit Also Includes Brake Caliper Piston Insulators

    Brake Caliper Piston Insulator Kit
    Installation Instructions
    1. Remove the front wheel and tire assemblies.
    2. Remove the brake calipers from the rotors. Refer to the appropriate shop manual for the procedures.
    3. Remove the inner and outer brake linings.
    4. Inspect the brake caliper pistons. If the pistons are phenolic, (brown in color) no modifications are required. Reassemble the calipers as described in the shop manual. If the truck is equipped with a 7.5L EFI engine, install the brake tube insulator kit. If the truck is not equipped with an 7.5L EFI engine, install the wheels and tires and release the truck.
      If the pistons are aluminum, continue as described below.
    5. Remove the steel retainer and Nomex thermal washers from the kit.
    6. Place a steel retainer on a bench with the tabs facing up. Refer to Figure 1.
    7. Place a Nomex thermal washer over the tabs so that it rests on the barb of each tab. Then, carefully press it over the barb of one of the tabs. Repeat the procedure for each of the remaining tabs.

      • NOTE:
        Do not bend the tabs. The inner edge of the washer may crease slightly as it passes over the barb. This is permissible provided that the crease can be smoothed out once the washer is in place. The washer must be installed without tearing.

    8. Push the washer down onto the back face of the retainer. Be sure it is seated uniformly on the retainer. Once installed, do not use an adhesive or other aid to hold it in place. This is neither necessary nor permissible.
    9. Snap an assembled insulator into the inside diameter of each caliper piston. Be sure the assembly is firmly seated on the rim of the piston. See Figure 2.
    10. Install the inner and outer brake linings.
    11. Clean the caliper slide surfaces on the caliper and the spindle with a wire brush and lubricate with Disc Brake Caliper Slide Grease, D7AZ-19590-A (ESA-M1C172-A) or equivalent.
    12. Reinstall the brake calipers. Refer to the appropriate shop manual for the procedures.
    13. Install the wheel and tire assemblies.

    May 25, 2009 | 2007 Ford E-350 Super Duty Length XLT

    2 Answers

    2001 brake pad replacement 2001 nissan quest


    The hard part is pressing the caliper piston abck into the caliper so you can get the new, thicker pads over the rotor. A large C Clamp works best.

    SECTION 206-03: Front Disc Brake 2001 Villager Workshop Manual
    REMOVAL AND INSTALLATION Pads —Front Disc Brake Removal
    1. Remove the wheel and tire assembly. For additional information, refer to Section 204-04 .
    1. Remove the front disc brake caliper bolts. torx bit. T20?
    1. Support the front disc brake caliper from the front strut and spring assembly using mechanics wire.
    1. Remove the front disc brake pads.
      1. Remove the outboard front disc brake pad.
      1. Remove the inboard front disc brake pad.
    Installation
    1. s1v~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure the master cylinder reservoir does not overfill and spill brake fluid while retracting the front disc brake caliper piston.
      NOTE: It is necessary to fully retract the front disc brake caliper piston in the bore before installing the front disc brake pads.
      Install the front disc brake pads.
      1. Install the inboard front disc brake pad.
      1. Install the outboard front disc brake pad.
    Caution. The outer pads are left and right. put left on driver side.
    1. Position the front disc brake caliper on the front-wheel knuckle and install the brake caliper pin bolts.
    1. s1v~us~en~file=ani_caut.gif~gen~ref.gif WARNING: It is necessary to depress the brake pedal several times to position the front disc brake caliper piston before driving the vehicle.

    Apr 23, 2009 | 2001 Nissan Quest

    1 Answer

    Rear brake to remove replace disk and service due binding


    Preliminaries Do 1 wheel at a time Use a jackstand on the wheel you are working on (safety First) Remove the tire on the selected wheel
    The Brake caliper is usually held on by 2 bolts. Some of the bolts are Allen wrench type, usually about ¼ inch or 5/16 inch. Remove and the complete brake caliper can be lifted off the rotor. The pads can now be removed. Before installing the new pads you must first return the pad piston to their original position in the caliper. Open the hood of the engine compartment and remove the cover on the master cylinder. This allow the brake fluid to be returned to the master cylinder. To return the pad piston to the original position you will need a C clamp and a flat piece of metal like a small flat file. Put the flat piece of metal on the piston and use the C clamp to put pressure on the piston. Tighten the C clamp slowly and you will see the piston slowly retract into the caliper body. Now you can insert the new pads into the caliper. Mount the caliper over the rotor and reinstall the 2 bolts.

    Loringh Hope this helps Good Luck PS Please leave a rating if Appropriate Thanks

    Nov 23, 2008 | 2001 Mazda 626

    1 Answer

    DISC BRAKES


    1st open the bleeder valve try to push piston in if piston go in the caliper good the rubber brake hose where it attash to metal brake release the pipe try to puh piston back in im sure it wont go in if so the rubber brake line let oil go truth but prevent the oil to come out that why the caliper thay on change the rubber hose everybody happy hope it help fixys our problem thanks pierre

    Jul 16, 2008 | 1997 Chevrolet Astro

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    24 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...