Question about Cars & Trucks
(seems the motor witch select forward/backward references when power up one or two teeth out of position - if I "force" the small white "ancor" a little bit down then works fine till powerdown again ). Does it have any "maintenance mode" when I can set the amount this motor moves to switch forward/backward ?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just had the same problem. When the seat is powered all the forward, one of the worm drives reached the end of its travel and jammed against the threaded block that it passes through. To fix this the seat has to be unbolted and tipped back. There are four tiny 6mm bolts that hold the motor plate in. Remove these and the motor will come out. The worm drive is bolted in at one end and has a set pin at the other. Remove the worm drive and use a couple of vice grips or equivalent to loosen the threaded block from the worm drive.
Posted on Jun 21, 2009
Blower motor resistor. Located next to/ near the blower motor itself. These are common failures for no high speed blower operation.
Posted on Jul 18, 2009
There is a pin that goes through the shifter that hold it in place, along with a spring just inside where the end of the shifting lever is, that makes the lever "return" after you pull it back to shift. These springs can break and bind up. Take a look at both.
Posted on Aug 14, 2009
There are plastic gears connecting the track to the seat assembly. Whne one of these strip the seat will only work or move to one side. Infiniti does not sell a simple fix. You are looking at buying an entire seat assembly complete with the module for all the electronics. It will be at a cost of around $950 - $1000. Once that is in, Infiniti must program the seat to the brain of the car, only then can you reset your memory settings.
Posted on Oct 02, 2009
Tips for a great answer:
Dec 10, 2016 | Cars & Trucks
Apr 08, 2015 | Seat Cars & Trucks
Sep 13, 2013 | 2003 Nissan Maxima
Aug 23, 2013 | Cars & Trucks
May 13, 2012 | 2009 Lincoln MKS
Jan 16, 2011 | Jeep Liberty Cars & Trucks
Apr 13, 2010 | 2001 BMW Z3
Nov 25, 2009 | 2006 Hyundai Sonata
19 people viewed this question
Usually answered in minutes!