Question about Cars & Trucks

Open Question

Scorpio 2.6 disel race / accilator fails

My scorpio 2.6crde modal 2006 race/accilator fails..when i press race its not perform ,at ideal speed it automatic goes high..

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Best Try
  • 165 Answers

SOURCE: speedo goes to 100 mph & the odometer Races

In the wiring diagram the signal from the VSS goes to the computer then from the computer to the speedometer it also branches out to the cruise control and radio. Without a lab scope I wouldn't know how to check the signal coming out of the computer to make sure the computer isn't messing up the signal but I would think if your cruise control works ok the signal would be ok which means the problem would be in the instrument cluster. I also would disconnect the small wire to the alternator to disable it. If the alternator has a bad diode and puts out an AC current this can do all sorts of funny things due to computer and other components not programed to handle AC current.

Posted on Dec 03, 2010


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is auto cruise and whats function?

automatic driving is possible in cruise,,situated on steering wheel,,we drive in fixed speed by cruise setting ,,no need to press accilator

Mar 28, 2015 | Cars & Trucks

2 Answers

Problem of disel engine

driven without coolant and overheated and cut out and will not start sense 02 berlingo 1.9 disel

Sep 20, 2013 | Mahindra Scorpio Cars & Trucks

2 Answers

2010 mahindra scorpio: how do you program a 2nd alarm remote

You'll need to find the valet switch in your scorpio. It is in glove box, towards the top, near the metal clip in which the lid of Glove Box Locks. You have to turn "ON" the ignition. Press that button once.....Leave it Press that button again and hold it You'll hear a beep confirming remote programming mode Now press lock button of each remote to be programmed one by one for atleast 2 seconds You'll hear a small beep on each button press confirming successful remote registration Now leave that button and close all doors and check the remotes for programming

Mar 11, 2012 | 2011 Mahindra Scorpio

1 Answer

1996 ford f450 speed omater does not work

there are 2 speed sensors. 1 in the rear diff. and 1 in the trans

Feb 28, 2012 | 1998 Mitsubishi Eclipse

1 Answer

I have a 2006 model scorpio, My vehicle has completed 3.0 lac km. Vehicle was having a lot of vibrations,I got replaced engine mounting & all the tyres.Steel some vibration's are their.Shall i...

It is most ideal that the job be done with a well equipped authorised service center. It is important that sine your vehicle had clocked so many kms, the entire vehicle needs a good closer look.
it must start with the engine, if there is vibration then there can be imbalance of the engine , need to check the condition of all four cylinders. Also the suspension, links and shocks, brakes, alignment and chassis/doors , hinges for rattling and vibrations.

May 11, 2011 | 2011 Mahindra Scorpio

2 Answers

RPM's race when coming to a stop. Brakes seem to not work well but not sure it if is because of the RPM's racing or if the brakes are bad. Service light just came on - what does this mean? Help!!

Usually the brake booster unit has failed or there is a rather large vacuum leak when these symptoms appear. Engine speed increases do to lean mixture (vacuum leak) and poor braking performance (brake booster does not have enough vacuum to function properly).

Oct 07, 2010 | 1997 Saturn SL

1 Answer

What is the correct air pressure to have for my 235/45R-17 Bridgestone Potenza RE960AS Pole Position tires on my 2004 Audi S4?


This are rice tires. The pressure depends on what you want to get from your tires.

Ideal pressure for races range from about 5 PSI below maximum pressure to a value near to maximum pressure. A good value for racing will start at about 45 PSI, up to 50 PSI.

Keeping the tires at race pressure (use 45/46, not 50) will give you good performance, but driving will be quite harsh.
For a good performance on everyday driving you can keep the tyres at 35 to 38 PSI, depending on terrain.

Here specs table.

Jan 06, 2010 | Audi S4 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides