Question about 2006 Dodge Magnum

1 Answer

How to replace the Low Beam (9006) bulbs on a Magnum SXT

The 9005's are easily accessible and on top. The 9006's are lower and tucked into either side. Can anyone suggest how to get to these little guys?

Thanks,
Lisa

Posted by on

  • 2 more comments 
  • gemmgurl Jul 27, 2009

    Hi C17,

    Not the Fog lights, the 9006 low beam bulb in the headlight. They're located under the 9005 bulb and sort of "tucked in" if you will towards the fender. The passenger side is somewhat accessible, but not sure how to get to the one on the driver's side.

  • gemmgurl Jul 27, 2009

    Hi C17,

    Not the Fog lights, the 9006 low beam bulb in the headlight. They're located under the 9005 bulb and sort of "tucked in" if you will towards the fender. The passenger side is somewhat accessible, but not sure how to get to the one on the driver's side.

  • gemmgurl Jul 28, 2009

    Hi C17,
    Thank you, I appreciate the info. I also found the following information for future reference if anyone else has the same question:
    On the drivers side you will need to take out your air box and move the power steering fluid reservoir to access the 9006 bulb. On the passenger side you just kinda gotta get your hand down in there... or you can take out your headlights...

  • Greg Bernett
    Greg Bernett May 11, 2010

    Are you asking about the fog light?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,984 Answers

Well, the best that I can tell you is this, and it is out of the tech manual.....hope this helps.


Removal & Installation To Remove:
NOTE: If replacing the left low or high beam headlamp, the air box must be removed first.

  1. Disconnect the battery negative cable.
  2. Disconnect the headlamp electrical connector.
  3. Twist the individual lamp out of headlamp housing.
To Install:
  1. Be careful not the touch the bulb envelope and place the bulb in the housing. Twist the bulb to lock it in place.
  2. Connect the connector to the bulb.
  3. Connect the negative battery cable.

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i know highbeam from the low beam


Low Beamer are the outter bulbs and high beams are the inner bulbs
low beam is 9005 bulb
high is 9006 bulb

Jan 27, 2014 | 1987 GMC Suburban

4 Answers

I have a 2006 civic SI. DRL indicator is on, driver side low and high beam ok. Passenger side low beam ok but DRL and hi beam not working. Any help is appreciated.


When either the high or low beam light is out in either side, DRL (daytime running lights) indicator will come on. When one bulb goes out, that's a clue the opposite bulb will burn out soon, so its best to replace both bulbs. If it was a fuse issue, both left and right side would be out. If driver side is OK but passenger side is not, then its a bulb issue. A 2006 Honda civic takes 9006 (HB4) low beam bulbs and 9005 (HB3) high beam bulbs. Cheapest is online from Walmart site-2-store. After procuring, wear latex, vinyl, or ANY gloves to keep your (corrosive) oil skin from coming in contact with headlight glass bulbs. Your skin oil will chemically react and cause shorter life span on glass bulbs. Instruction don't tell you this, so you handle with your hands, then need to replace bulbs 3 years later instead of 5 years (or more) in the future. With gloves on, pop the hood and look behind each headlight. Turn counter clockwise to unlock headlight bulb holders. Its a quarter to half turn to unlock bulb holder lock. Replace one bulb at a time so you don't confuse high beam from low beam. The wire has a tab you need to lift to pull out & disconnect wire connector. You might need a slim narrow-**** (NOT phillips) screwdriver to lift the tab; or use your house key. Snap the wire connector to the new bulb, then twist into headlight housing to secure bulb holders, then move on to the next bulb to repeat the procedure. Pict below, 9005 high beam is on the left, 9006 low beam is on the right. Handle by grasping the plastic base, not the glass bulbs. The raised potrusion on the bottom center is where the tab locks onto wire connector. Replace all 4 bulbs now, but in the future, its likely the low beam will wear out before the high beam. In the future, replace only the pair, not all 4. The factory installs inferior bulbs that go out sooner, hoping you'll take to dealership and they ******** you with higher parts-n-labor fees. As opposed to Walmart online site-2-store, it would cost you AT LEAST triple in parts & labor from dealership to replace all 4 headlight bulbs :-(
45d1f6ac-2983-42b9-a46c-30ef441b89e7.jpg

Nov 29, 2013 | 2006 Honda Civic

1 Answer

What bulb is the turn signal bulb on a 2002 oldsmobile alero


On 2002 Oldsmobile Alero Car Light Bulb Size, check this list:

Low Beam Headlight Bulb Size: 9006 or 9006 HID Upgrade KitHigh Beam Headlight Bulb Size: 9005 or 9005 HID Upgrade KitParking Light Bulb Size: 3157NALLFront Turn Signal Light Bulb Size: 3157NALLRear Turn Signal Light Bulb Size: 3157LLTail Light Bulb Size: 3157LLStop Light Bulb Size: 3157LLHigh Mount Stop Light Bulb Size: 921Fog/Driving Light Bulb Size: 894License Plate Light Bulb Size: 194Back Up Light Bulb Size: 921Front Side Marker Light Bulb Size: 194Rear Side Marker Light Bulb Size: 2825Glove Box Light Bulb Size: 194Map Light Bulb Size: 212-2Dome Light Bulb Size: 212-2 or 561Step/Courtesy Light Bulb Size: 168 or 73Trunk/Cargo Area Light Bulb Size: 211-2

Hope helps.

Apr 25, 2012 | 2002 Oldsmobile Alero

1 Answer

Can you replace the just the bulbs in the 1998


Yes just the bulb.9006 is your low beam and 9005 is your high beam.They will go in from the rear.





















Feb 01, 2010 | 1998 Chrysler Concorde

1 Answer

What kind of head light replacement does a 1989 crx dx take?


9005 high beam
9006 low beam
Single bulbs goes into the back of the housing.

Jan 29, 2010 | 1989 Honda CRX

1 Answer

How do i replace a low beam head light on a 94' camry ?


Things You'll Need:
  • #H11-55W and #9005 replacement bulbs (low- and high-beam bulbs for 2007 and later models)
  • #9006 and #9005 replacement bulbs (low- and high-beam bulbs for 2002-2006 models).
STEPS TO REPLACE HEAD LIGHT: Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off. Open the hood using the primary and auxiliary hood release latches. Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced. Turn the headlight bulb socket counterclockwise to remove it from the assembly. Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.

Dec 05, 2009 | 1994 Toyota Camry

1 Answer

How do i replace the headlight bulb?


I am not familiar with the 94 Camry headlight bulbs; however, we have a 94 Lexus ES. The layout is probably the same.

The bulbs are easily accessible under the hood. The bulbholders rotate about 30 degrees and then release. Pull them out, replace the bulb, reinsert them, and rotate back to the original position. You can do all four in 10 minutes. The bulbs are likely 9006 (low beams) and 9005 (high beams).

Oct 10, 2009 | 1994 Toyota Camry

1 Answer

What size r the 04 cadillac headlight bulbs?


Headlight Bulbs for 04 Cadillac Deville
High Beam: #9005
Low Beam: #9006

Feb 08, 2009 | 2004 Cadillac Deville

1 Answer

Need to know what replacement bulb # is for 2000 deville dts


If you are talking about the headlights. Low beam is a 9006 and the high beam is a 9005

Jan 30, 2009 | 2000 Cadillac DeVille

3 Answers

Replacing a headlight bulb, low beam, in a 2004 Chevi Trailblazer


Step1
Your first stop should be to your local auto parts shop to get the bulbs you need. You'll need to pick up #9006 bulb, this one has a gray bas and is used for replacing the outside high beam. If you are looking to replace your inner low beams you'll need to pick up #9005 which has a black base. The bulbs should run you about $16.00 USD.
Step2
Alright once you have your bulb and are ready to replace it make sure you have popped the hood the release lever is on the inside of your vehicle.
Step3
While facing your car with the hood open, your going to remove the grill by pushing down on the two retainer clips which are on the top of the grill. You'll need a flathead screwdriver to help you with the rest of the retainer clips. There are two on the bottom ends of your grill one in the center and 2 on each side. Now you'll just pull up on the grill and it should come out easily.
Step4
On each side of the headlamp you should see a One inch long tab, when you pull up on the tabs it will release the headlamp so that you may pull the headlamp toward you. Pull the head lamp out.
Step5

There will be two round rubber caps at the rear of the headlamp. Remove the caps and then pull out the wire harness from the bulb.
Replace the bulb or bulbs and remember that #9006 has the gray base and is for the high beam and #9005 is for the low beam and has the black base. Reconnect the wire harness and replace everything to its original position and now you have a fixed headlamp! Congratulations!

Jan 14, 2009 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
2006 Dodge Magnum Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...