Question about 1996 Jeep Grand Cherokee

1 Answer

1996 Jeep Grand Cherokee Laredo AC blower wont work on high

I just purchased a 1996 Jeep Grand Cherokee Laredo for my daughter. The AC/Heater blower won't run when turned to high. It does work at the slower speeds. Also, occasionally it wont work at all. But then, after not working, the next time you get in the car it works (except it still wont work on high). I am guessing it might be a relay (but just guessing). Any ideas/suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

I'd check the relay and the resistor ...don't have a location for yours but the resistor is always installed into the heater box so it stays cool. you can usually follow the wiring back to the relay as it's generally nearby. Resistor looks like a piece of circuit board material with several wires connected to it with two screws holding it to the heater box so it sits flush except for the wires. It has several coils inside...any that are broken have failed.

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok my 2001 Grand Cherokee Laredo wont stay in park


Transmission sticks in reverse- won't go into park. - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...won-t-go-into-park
Jun 14, 2013 - 12 posts - ‎5 authors 2003 6 cyl 4x4 Grand Cherokee Laredo automatic- Occaionally, when shifting from REVERSE TO PARK, my Jeep will stay in reverse. Typically its ... '2001 WJ'4,0L'42RE'NV 242'380000 km'ECE Compliant' ??????????? ??? ...

2001 jeep grand Cherokee laredo - CarGurus

www.cargurus.com > Questions > Jeep > Grand Cherokee
CarGurusJan 27, 2014 - 2001 jeep grand Cherokee laredo - Just purchased a 2001 Jeep GrandCherokee Laredo and ... It starts in PARK sometimes and sometimes it won't and I have to start it in Neutral. ... Hatch shuts flush, but won't stay shut. help!

Oct 22, 2015 | Cars & Trucks

2 Answers

2005 jeep laredo-heater/ac fan speed control only works on high


Hey! Oddly enough, mine started with the same thing this morning. I Googled the heck out of this and I'm more than satisfied that the most likely culprit is the blower resistor. This is EXCELLENT how-to guide (with lots of positive results): http://bvensko.blogspot.com/2008/02/how-to-repair-jeep-grand-cherokee.html

Feb 02, 2010 | 2005 Jeep Grand Cherokee

1 Answer

My 95 jeep cherokee heater switch on ly works on high


I would try to replace the blower motor resistor first,If that doesnt repair your problem you may wanna try replacing the blower speed switch.The resistor is located under the passenger side of the dash mounted in the heater box.

Jan 30, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Blower only works on high setting - 95 Grand Cherokee Laredo- is it the resister? Is it easy to get to and replace?


theres a relay and you also have a resistor unit ! the bolts to the heater box wire wound

Jan 14, 2010 | 1995 Jeep Grand Cherokee

2 Answers

Heat/AC Blower fan speed only works on High


hello, this sounds like a bad blower motor resistor!! its cheap and easy to change..if you need more info on locations let me know,, good luck.....marty

May 27, 2009 | 2005 Jeep Grand Cherokee

1 Answer

Heater/AC fan wont turn off


replace the blower speed control resistor, they short and allow this to happen

May 13, 2009 | 1997 Jeep Grand Cherokee

2 Answers

1994 jeep grand cherokee heater only works on high


U need to replace the blower motor speed control resistor.

Feb 25, 2009 | 1995 Jeep Grand Cherokee

2 Answers

Blower motor will not come on (has climate control) checked fuse what about relay or resistor and where is it located?


hi I have a 98 Jeep Grand Cherokee Laredo.just turned over 200k miles too. the ac/heater blower just stopped working. I have replaced the resister, but no change. any other ideas? where would the relay be? and could this be the porblem? i need help!!

Jan 15, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Heating system blows only cold air


it maybe a blend door problem. if both hoses at the firewall for the heater are close in temperature its not likely a heater core. the actuator for the blend door is located on the bottom of the heater/ac box towards the middle of the bottom. it will be a tight fit but you can remove it without removing any part of the dash. take it off and disconnect the power. start the vehicle and manually move the door and see if the temp changes

Jan 11, 2009 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

927 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...