Question about Ford F-150

1 Answer

I HAVE A 2004 FORD CREW CAB. THE SWITCH ON THE DRIVERS DOOR WILL OPERATE ALL FOUR WINDOWS CORRECTLY, BUT THE THREE PASSNEGERS SWITCHES WILL ONLY PUT THE WINDOW DOWN NO UP MOVEMENT ON ALL THREE PASSENGERS DOORS. I HAVE TRIED REPLACING THE MASTER SWITCH ON THE DRIVERS DOOR AND THERE IS NO CHANGE.

Posted by on

  • Anonymous Mar 14, 2014

    I have a 2007 ford lariat crew cab and the problem is in the power windows the driver side can and will operate all four windows up and down ,the passenders all can roll down their windows but they will not roll up ,all three passenger windows do the same thing ,windows roll down but will not roll up.the drivers side has to roll them up .i could understand nit if one did this but all the passenger windows do the same thing,down but not up . please help js

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

Ford is the worst for door regulators. Remove the door panel on one door, You will see a water barier, peel this down and glue back in after repair. You will see three star screws wich hold in the window motor, remove these, take out the motor remove the plate and check the three plastic plugs, if damaged replace with plugs or ball beaings, next you will see some aluminum pens holding in the window regulator, using a punch, punch out the rivits, then using a 1/4 drill drill out the aluminum. Replace these with 1/4 bolts and lock nuts. Apply plenty of grease on the door regulator, and plenty of grease in the motor.

Posted on Jul 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Dodge Ram 1500 Quad Cab. Passenger windows


rewire your amp power source to another circuit and recheck for problem

Sep 01, 2013 | 2004 Dodge Ram 1500

1 Answer

2004 Toyota tundra passenger power window switch not operational


Try a passenger side door switch or a new complete master switch on drivers door. Alaways check fuses also.

Jun 16, 2012 | 2004 Toyota Tundra Cab

1 Answer

Ford F350 Crew Cab Power Window Problem


Did you check for power at the switches. Are you sure the fuses are ok. Sometimes the wires break because of opening the door. You will have to inspect the harness and maybe have to remove the door panel. Most likely its a driver door wiring issue or the fuse.

Aug 05, 2009 | 1997 Ford F350 Crew Cab

1 Answer

2003 F250 Power Windows won't work


check fuses 35 & 41 (10 amp, red).
it also shows an accesory delay relay in the fuse panel.
And fuse 601? 30 amp.

make sure you don't have lock-out on driver switch panel activated.

Power Window System
Features and Operation
NOTE: The accessory delay feature will allow power window operation up to 10 minutes after the ignition is off or until a door is opened.
If equipped with power windows, the window control switch (14529):
  • will operate the power windows only when the ignition switch is in the RUN or ACC position.
  • is located on each front door trim panel, and Crew Cab and Excursion rear door trim panel.
  • may be used to raise or lower the driver side, passenger side and rear windows from the LF control on the driver side, or the passenger window from the passenger switch.
  • includes a one-touch down (OTD) feature for the driver door window.
  • can partially lower the driver side window when the LF window control switch is depressed half way (first detent).
  • will completely lower the driver side window when the LF window control switch is fully depressed and then released (second detent).
Power Window System — Modes of Operation
There are two modes of operation for the power window system.
Manual Mode
When the LH window control switch is pressed to the first down position, the window will move down until one of the following conditions are met:
  • The LH window control switch is no longer in the first down position.
  • The LH window control switch is pushed to the OTD position, causing the windows to enter auto mode.
Auto Mode
Auto mode provides the OTD feature. The OTD feature is activated when the LH window control switch, for the LH window, is pressed to the second down position.
Auto mode will be terminated when any of the following conditions are met:
  • The LH window control switch is pushed to the UP position.
  • The LH window control switch is released (OFF position) and then moved to the DOWN position (first detent) or OTD position (second detent).
  • Note: Delayed accessory feature must be active.
The OTD feature is controlled by the window control switch.

---------------------------------------------------------
Condition Possible Sources Action
  • All power windows are inoperative
  • Fuse(s).
  • Circuitry.
  • LF window control switch.
  • Accessory delay relay.

May 23, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Remote will not operate


The passenger door control module might be bad. The window switches are built into the module.

Feb 27, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

2 Answers

Windows won't roll up


turn the truck upside down and roll them 'down ' again.....
or,,,, test powers and grounds to the switch cluster master at drivers door..then at each switch at each door, after fuses are checked and are good....how do you get them back up to check if they go down?....by hand? hard to believe ALL are bad but this could be the regulators and/ or motors at each door failing

Nov 07, 2008 | 2004 Ford F150

1 Answer

Door ajar light and interior lights stay on


The switch is attached to the door stop. First clean with brake parts cleaner and then follow with white lithium grease.

Jul 13, 2008 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Dome light


the switch is in the latch assembly

Jun 19, 2008 | 2004 Ford F250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...