Question about 2001 Chevrolet Blazer

2 Answers

2001 Chevy 4wd won't go into 4wd.

I have 2001 Chevy Blazer Lt . When I try put into 4wd it will not go into 4wd. The buttons light up on the 4button console and I can hear it clicking in the dash but it does not go into 4wd. What do you think it is and what steps should I take to fix it?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

I have the same vehicle and you want to check the vacuum lines that go to the transfer case. The one just under the hood, by the brake fluid resivoir, was the one that was rotted on mine. When I redid the transmission, I changed them all.

Posted on Aug 01, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,071 Answers

There is a module on transfer case above front drive shaft this module is bad but there are two styles so you will need the part number off of yours

Posted on Jul 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is wrong with my 2000 chevy blazer ; it is a 4wd automatic an i locked it in 4wd low to pull my boat out of the water and can not get it to shift back i to 2wd?


You shouldn't have to use 4wd to tow a boat out of the water. Does your truck have a 2wd button or just the 4high and 4low button? If you have a 2wd button, put tranny in neutral and then hit the 2wd button. If you just have the 4high and 4low button, put the tranny into neutral then press the 4high button twice (Once to get back into 4high, then again to get out of 4high and back to 2wd).

Jun 04, 2014 | 2001 Chevrolet Blazer

1 Answer

2005 blazer won't shift out of 4WD


put in reverse get going 5-10 mph put in neutral then try to get out of FWD while still in motion.This doesn't always work but it eliminates
a lot of possibilities.

Mar 10, 2013 | Cars & Trucks

1 Answer

Hi my name is chris i have a 2001 chevy blazer 4x4 for so reason it keeps putting itself into 4x4 when i stop at a light or stop sign and won''t let me put it back into 2 wheel drive ?


There's been a lot of problems with the 4wd systems on the blazers of that vintage. The only sure way to track down the cause is to have the system scanned. Some of the most commom causes are: the switch in the dash, - the control module, - the transfer case . There are other issues if it has auto 4wd as the ABS system is tied into that system to activate it when the sensors sense wheel slippage. If your blazer has the auto 4wd funtion and has a ABS light on, it could be in the ABS system.
IF you could get it back into 2wd, you could pull the fuse to the 4wd to dis-able untill you have a chance to have it scanned.

Jun 24, 2011 | 2001 Chevrolet Blazer

1 Answer

I have a chevy 1500 4wd 1999 it doesn't go into 4wd sometimes ,i get service 4wd what could be the problem


I HAVE A 96 S10 LT BLAZER THE SYSTEM IS THE SAME THE WAY ITS WORKS IS ON ENGINE VACUUM A CABLE FROM A VACUUM ACTUATOR LOCATED UNDER THE BATTERY TRAY RUN TO THE SHFFT HOUSING THATS BOLTED TO THE FRONT CARRIER IT PULLS ON A SHAFT TO ENGAGE 4X4 THE PROBLEM IS THE CLIP THAT HOLDS THE CABLE TO THE SHAFT **** ITS NOT MUCH MORE THEN A PAPER CLIPI TOOK OFF MY SHIFT HOUSING BENT THE CLIP SO I WOULD ALWAYS WORK SEEING CHEVY WON;T SELL JUST THE CLIP WITH OUT THE CABLE I HAVEN;T HAD A PROBLEM SENCE


Oct 10, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

I have a 1996 chevy blazer and dont know how to disengage from four wheel drive to two wheel drive?


As I recall the 96 blazer had electronic shifting for 2wd to 4wd. There should be a small panel on the drivers dash buttons for 2wd, 4wd lo and 4wd hi.

Simply press the desired button while stationary and if the system is functioning properly then it will shift and the light for the engaged type of drive will be lighted. Generally you would like to be in 2wd for this vehicle.

Mar 10, 2010 | 1996 Chevrolet Blazer

1 Answer

I tried to put a 2001 chevy suburban 2500 in four


check the actuator in the front diff to see if it is working

Jul 12, 2009 | Chevrolet Suburban 2500 Cars & Trucks

1 Answer

Repalce ball joints 01' Chevy Blazer 4WD


you should just be able to loosen the half shaft and be ok that way

Mar 09, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...