Question about 1989 Toyota Camry

1 Answer

Ignition lock cylinder removal without key on 1989 toyota camry v6-automatic

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Take the pannelling off around steering wheel inset a screw driver in key slot brekaway barrel to release steering lock pin then at other end of barrel take out scre and pull on wiring harness to expose a plastic barrel that will allow you to start car with a screw driver ect and you would not have steering lock as pin has been removed

Posted on Aug 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the ignition cylinder on my 2002 Toyota Rav 4 without the key?


from another post, psoted by James Allmond

How to remove ignition cylinder from Toyota Camry 1993

Here are step-by-step instructions for the removal and re-installation of your ignition cylinder on your Toyota. Hope this sheds some light on the subject and solves your problem. Have a great day!




  1. Disconnect the negative battery cable. If equipped with an air bag, wait at least 90 seconds before working on the vehicle.
CAUTIONSome models covered by this guidemay be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in .
  1. Remove the lower steering column cover. Unfasten the ignition switch connector under the instrument panel.
  2. Remove the screws which secure the upper and lower halves of the steering column cover.
  3. Turn the lock cylinder to the ACC position with the ignition key.
  4. Push the lock cylinder stop in with a small, round object (cotter pin, punch, etc.).
On some vehicles, it may be necessary to remove the steering wheel and combination switch first.
  1. Withdraw the lock cylinder from the lock housing while depressing the stop tab.
  2. To remove the ignition switch, unfasten its securing screws and withdraw the switch from the lock housing.
To install:
  1. Align the locking cam with the hole in the ignition switch and insert the switch into the lock housing.
  2. Secure the switch with its screw(s).
  3. Make sure both the lock cylinder and column lock are in the ACC position. Slide the cylinder into the lock housing until the stop tab engages the hole in the lock.
  4. Install the steering column covers.
  5. Connect the ignition switch wiring.
  6. Connect the negative battery cable.

source

How do remove the ignition cylinder on my 2002 Toyota Rav 4 without the key

Jul 28, 2016 | Toyota Cars & Trucks

1 Answer

I have a1992 Toyota Camry automatic and I can't take the steering lock off


Locate the ignition switch, then use a Phillips head screwdriver to remove the mounting bolts which hold it in place. Place your key in the ignition and turn it to the locked position. Use a small flat-head screwdriver to unclip the retaining pin, which is attached to the lock cylinder. This will let you remove both the ignition switch and lock cylinder

Aug 07, 2013 | Toyota Camry Cars & Trucks

1 Answer

I have a 1999 toyota camry and my key in the ignition cylinder wont turn i moved steering wheel and its on park do ineed to replace ignition cylindern


If the key will not turn the lock cylinder and you have removed the switch, you probably need a new cylinder.

Sep 07, 2012 | 1999 Toyota Camry

1 Answer

Toyota camry 1998 lxe v6 keys lost


IGNITION CYLINDER WEARS NEED TO FILE KEY ALITTLE, USE EMORY CLOTH,,

May 29, 2010 | 1998 Toyota Camry

1 Answer

How to change the lock cylinder


After you remove the plastic surrounds, you will see the ignition and steering lock bolted around the steering column.
there are some round headed screws holding it all together, these are called tamperproof, and when installed the hex head breaks off leaving the round head you will see.
To remove them I use a small chisel or punch to unscrew them, or alternately you could drill the heads off

May 06, 2010 | 1992 Toyota Camry V6

1 Answer

My 1993 toyota camry's automatic door won't lock. when i press the lock button or use the key, it just click back to open. what could theproblem be?


it could be a bad door switch or the key switch in the ignition, it thinks the key is in the ignition so it doesnt let you look the door it unlocks it, may need to replace the ignition or dissable the sensor in the igniton by cliping the wiring .

Mar 01, 2010 | 1993 Toyota Camry V6

1 Answer

Key will not turn ignition switch.


try sanding down the key alittle - saved me a fortune on my 96 civic

Apr 30, 2009 | 1991 Toyota Camry

1 Answer

How to remove ignition cylinder from Toyota Camry 1993


Here are step-by-step instructions for the removal and re-installation of your ignition cylinder on your Toyota. Hope this sheds some light on the subject and solves your problem. Have a great day!




  1. Disconnect the negative battery cable. If equipped with an air bag, wait at least 90 seconds before working on the vehicle.
CAUTIONSome models covered by this guidemay be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in .
  1. Remove the lower steering column cover. Unfasten the ignition switch connector under the instrument panel.
  2. Remove the screws which secure the upper and lower halves of the steering column cover.
  3. Turn the lock cylinder to the ACC position with the ignition key.
  4. Push the lock cylinder stop in with a small, round object (cotter pin, punch, etc.).
On some vehicles, it may be necessary to remove the steering wheel and combination switch first.
  1. Withdraw the lock cylinder from the lock housing while depressing the stop tab.
  2. To remove the ignition switch, unfasten its securing screws and withdraw the switch from the lock housing.
To install:
  1. Align the locking cam with the hole in the ignition switch and insert the switch into the lock housing.
  2. Secure the switch with its screw(s).
  3. Make sure both the lock cylinder and column lock are in the ACC position. Slide the cylinder into the lock housing until the stop tab engages the hole in the lock.
  4. Install the steering column covers.
  5. Connect the ignition switch wiring.
  6. Connect the negative battery cable.

Nov 23, 2008 | 1993 Toyota Camry V6

Not finding what you are looking for?
1989 Toyota Camry Logo

2,206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...