Question about 2004 Land Rover FreeLander

1 Answer

2004 Land Rover Freelander - Engine Shakes

Just replaced the CAM Shaft and timing belt on my 2004 Land Rover Freelander (57,000 miles). However, now that engine starts, it runs well for about ten minutes then the engine shakes. I have taken it to the dealer and a local mechanic to no avail. Can someone please help? Thanks in advance.


DeeDee

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 44 Answers

Hydraulic lifters? I have been racking my brains for this one. Lifters will sometimes pump up when cold and then lose pressure as they get worked. Would explain why your camshaft died. Suggest you look at old camshaft, see the cams that were worn and replace those lifters. Only thing I can come up with!

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset timing marks after replacing a broken timing belt?


Land Rover Freelander 2002-2005 KV6 Timming belt and ...

? 4:31
https://www.youtube.com/watch?v=sz_oe9tIFH4
Jul 3, 2011 - Uploaded by Jaime Depaula
Land Rover Freelander 2002-2005 KV6 Timming belt andreplacing valves - Video 2 ... shops in North Eastern USA for bent valves and timing belt change? .... Land Rover 200tdiTiming Belt -From Broken Belt to Retiming the ...

ROVER K Series Cambelt Change Video - YouTube

? 10:52
https://www.youtube.com/watch?v=1Qn8ljQKZxA
May 4, 2012 - Uploaded by metalworker007
How to change a rover K series cam belt .. by Technozen of ...soy espa?ol porfavor quiero saber timing marks de MG ROVER 25 petrol 1795cc engen .... Hi, Have a Land Rover Freelander1999 petrol serie K, that dont start, ...

Freelander 1.8i timing belt - Land Rover Technical Archive - LR4x4 ...

forums.lr4x4.com > ... > Tech Archive > Land Rover Technical Archive

Nov 20, 2006 - 1 post - ‎1 author
The following is instructions for replacing the timing (or camshaft) belt on the 1.8i petrol engine, as fitted to a Freelander. This is the K-series ... With the timing set, thecam sprocket marks should look like this. Posted Image

How to Replace timing belt on Land Rover Freelander 2.5 ...




Dec 10, 2015 | 2002 Land Rover Freelander

2 Answers

2002 free lander wont start every now and then it turns over


run fault codes and check for cam/crank position sensor. Check that the immobiliser is operational. Check that the cam shaft is turning (broken timing belt/chain)

Jul 20, 2014 | 2002 Land Rover Freelander

1 Answer

Is it a common problem on a 04 LandRover freelander with a


No it not a common problem, this engine is an INTERFERNCE ENGINE, which means, when camshaft bind and you need to fine out why it bind did you loose oil pressure or timing belt breaks, piston's will hit cylinder head valve's.Land Rover recommends replacement of timing belt every 72,000 mile's.

Jul 06, 2010 | 2004 Land Rover FreeLander

2 Answers

Freelander w reg. 1.8 petrol, 64,000 miles on clock. when do I need to change the timing belt


If you are asking about the actual TIMING BELT and not the serpentine belt, I would check with a dealership or a local garage. The Freelander has three (3), yes--3 timing belts:

front timing belt

left side rear timing belt

right side rear timing belt

Hope this helps!

Oct 26, 2009 | 2002 Land Rover Freelander

1 Answer

2004 Landrover Freelander Engine Shakes


how did the cam shaft failed? is there a spark on the plugs for the cylinders than are not firing? did you have a timing belt failour? if so you may have damage valves or pistons, do a compression test on the engine to know condition of cylinders

Jul 30, 2009 | 2004 Land Rover FreeLander

1 Answer

Frelander td4 2004


if it blew the cap off it had too much oil in it to start with oil pump might be weakend check oil level when cold not running add or remove oil as needed

May 19, 2009 | 2004 Land Rover FreeLander

Not finding what you are looking for?
2004 Land Rover FreeLander Logo

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...