Question about 1996 Geo Metro

1 Answer

TIMING BELT REPLACE 1996GEO timing belt replacement

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 1,757 Answers

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/geo/model/metro/1996_geo_metro_timing_belt_diagram_marks.htm

Posted on Mar 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve engine


Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...
4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l
4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement



Dec 03, 2015 | Mazda Cars & Trucks

2 Answers

Need to no after how many miles we have to change the timing belt


It is recommended that a timing belt should be change every 100,000km. Honda's and Acura's especially. Whenever the water pump is changed, it is also wise to change the timing belt too as it is all in one spot, and VS. In some cars, [Acura's], when the timing belt breaks, it also can tear your valves in your engine apart, so I hope that this answers your question

Jan 04, 2013 | Cars & Trucks

3 Answers

When should the timing belt be changed


I want to say it is every 100,000 miles. At the same time you do the timing belt replace the water pump and belt tensioner as well. They may not seem bad but go ahead and do it while being in there. It will save you problems down the road

Aug 20, 2012 | 2006 Saturn Vue

1 Answer

How do you replace timing belt


no.

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 01, 2012 | 1996 Volvo 960

1 Answer

Timing belt maintenance interval for 2001 acura 3.2 CL


REPLACE TIMING BELT AT EVERY 60000 MILES INTERVAL.IF WATER PUMP FAIL FIRST REPLACE TIMING BELT WHEN YOU REPLACE WATER PUMP.BECAUSE BAD WATER PUMP WILL DAMAGE TIMING BELT.

Nov 14, 2011 | 2001 Acura 3.2CL

2 Answers

Is it necessary to take the timming belt off to replace the water pump on a 1996 isuzu rodeo


3.2L engine, you will have to remove timing belt to replace water pump, your water pump is timing belt driven, I would replace timing belt while in there, good luck, hope this was very helpful.

May 14, 2010 | 1996 Isuzu Rodeo

1 Answer

Hey the water pump just went in my 1998 toyota rav4 2litre. how do i go about replacing it ? i cant find anywhere on here


Your water pump is driven by your timing belt, can not be seen with out remove timing belt cover, to replace you will also have to remove timing belt, if timing belt has not been replace best to replace it now also, timing belt should be replace every 60,000 miles. make sure before removing timing belt that you mark where all pulley gear's are at, so when you install the timing belt back on there in the same place as before you move the timing belt, no need to mark water pump gear,good luck,hope this was very helpful.

May 13, 2010 | 1998 Toyota RAV4

1 Answer

Alternator belt replacement


Check Your Timing Belt
  • Check your owner's manual for the recommended mileage for replacing your timing belt. Replacement for Hyundai Sonatas is 60,000 miles.
  • Locate the timing belt and examine it for breaks, damage, fraying, worn spots or looseness.
  • Inspect the belt for cracked or missing teeth that may be the result of foreign material collecting between them.
  • Determine if the timing belt damage is on both sides. Single-side damage may be caused by the timing belt's guide.
    Remove Your Timing Belt

  • Disengage the negative battery cable.
  • Turn the tensioner arm to the right 14° and take the timing belt off its pulley.
  • Take out the coolant pump, idler, tensioner and crankshaft pulleys and both timing belt covers.
  • Remove the engine's mounting insulator and mount bracket and the auto tensioner.
  • Align the crankshaft's timing mark so the first cylinder piston is at "Top Dead Center" (TDC). The camshaft sprocket and cylinder head cover timing marks also should align.
  • Unfasten the timing belt.


    Replace Your Timing Belt

  • Examine the cam and crankshaft sprockets. Replace if there is excessive wear or other damage.
  • Position the new timing belt on the sprockets.
  • Relax the timing belt tensioner so it can make contact with the belt. Adjust the belt to the tension recommended in your vehicle owner's manual. Also align the timing indicators on the cam, crank and other sprockets.
  • Return the engine to the 0° mark by turning it two revolutions in the direction of travel.
  • Secure the timing belt cover and reinstall whatever was removed to access the timing cover.
  • Reconnect the negative battery cable and any other items that were disconnected.
  • Start the engine and look for leaks


Nov 24, 2009 | 2000 Hyundai Sonata

2 Answers

When should you replace timing belt on Toyota Sienna van? It's a 1999 model with 210,000 kms on it and I need a new water pump. Should I replace the timing belt at the same time?


Somewhere between 90,000 mil;es and 120,000 miles you should do your timing belt. But first make sure you do not have a timg chain. If you have a timing chain, you never have to change it at all.

Sep 08, 2009 | 1999 Toyota Sienna

3 Answers

How Do I Change the Timing Belt on my 2004 Accent?


The timing belt is inside the valve cover. You have to remove the the valve cover gasket. Underneath that you will find the valves, the head (the top of the engine block). There is a pulley that is used to tighten the timing belt. The pulley is attached to the piston and valve timing. This pulley is usually marked as to where it should be positioned in relationship the timing of the pistons and the cam shaft rotation. This is what is referred to as stting the timing in the engine, and the timing of the distributor. Since your belt is broken the engine has lost track of its timing, so you might have to refer to a manual on your model of car to set the timing. You will also need to replace the valve cover gasket when you put the valve cover back on.

Dec 18, 2008 | Hyundai Motor 2004 Accent

Not finding what you are looking for?
1996 Geo Metro Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...