Question about 1995 Chevrolet K1500

2 Answers

HOW DO YOU REPLACE THE BRAKE BOOSTER AND THE COST FOR THE PART?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Might be a vacuum leak
Also check the check valve on the power brake booster ..... it cost 1500 dollars
to replace the tranny at the local tranny shop ...

Posted on Jul 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,568 Answers

This shouldn't be tough to do but I highly recommend for this and future problems that you buy either a Haynes (1st choice) or Chilton service manual. We own no vehicle without one.
Either will give you insight into the difficulty of a job and let you estimate what it should cost (for labor) if you have it done. The publications are available on line and at auto parts stores for $20-30 US.

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix power brake booster on a 2003 Ford Expedition


It isn't that bad of a job if you are able to get under the dash to remove the actuator rod from the brake pedal and unbolt the 4 bolts that hold the booster to the firewall. Other than that, you just have to unhook the vacuum line from the booster under the hood and remove the two bolts that hold the master cylinder to the booster. You do not have to open up the brake system, so there is no need to worry about having to bleed the brakes.

Feb 12, 2016 | Ford Cars & Trucks

1 Answer

How to know if the brake booster is bad on a 95 buick lesabre


Brake peddle should be hard, if bake peddle soft check master cylinder or replce, try bleeding brake system too. Ceck if check valve is bad this is located on vacumm line from intake manafold to booter pump body. brake seal at check valve booster pump should hiss if not check vaccumm line for leaks if no leak in line replace check valve they don't cost much.

Oct 04, 2013 | Buick LeSabre Cars & Trucks

1 Answer

Step by step instructions for replacing brake booster on a 1999 Toyota Camry


its my pleasure to answer your question how to replace the brake booster :
1 With the engine off, step on the brake pedal several times to relieve the brake booster of vacuum.
2 Press the brake pedal down and start the engine. Verify that the brake pedal sinks slightly. Turn off engine.
3 Remove the vacuum hose from the brake booster.
4 Remove the brake lines from the master cylinder. Remove the master cylinder from the brake booster. Plug the fittings to prevent brake fluid seepage.
5 Disconnect the brake pedal from the push rod.
6 Have an assistant hold the brake booster from inside the engine compartment. Remove the nuts that hold the brake booster to the firewall. These nuts are usually located under the dash on the interior of the firewall.
7 Remove the brake booster.
8 Install the new brake booster to the firewall. Tighten the mounting nuts.
9 Connect the push rod to the brake pedal.
10 Connect the vacuum hose to the brake booster.
11 Attach the master cylinder to the new brake booster and reconnect the brake lines.
.12 Bleed the brakes at the master cylinder.

Oct 04, 2013 | Cars & Trucks

1 Answer

How to remove brake booster on 1999 Toyota Camry


The following steps will help you to replace a Toyota Camry brake booster :
1 With the engine off, step on the brake pedal several times to relieve the brake booster of vacuum.
2 Press the brake pedal down and start the engine. Verify that the brake pedal sinks slightly. Turn off engine.
3 Remove the vacuum hose from the brake booster.
4 Remove the brake lines from the master cylinder. Remove the master cylinder from the brake booster. Plug the fittings to prevent brake fluid seepage.
5 Disconnect the brake pedal from the push rod.
6 Have an assistant hold the brake booster from inside the engine compartment. Remove the nuts that hold the brake booster to the firewall. These nuts are usually located under the dash on the interior of the firewall.
7 Remove the brake booster.
8 Install the new brake booster to the firewall. Tighten the mounting nuts.
9 Connect the push rod to the brake pedal.
10 Connect the vacuum hose to the brake booster.
11 Attach the master cylinder to the new brake booster and reconnect the brake lines.
.12 Bleed the brakes at the master cylinder.

Oct 04, 2013 | Cars & Trucks

1 Answer

2002 jaguar x type how do remover brake booster hoes connector from the manifold


Check the help link below and follow the procedure:----

How to replace Brake Power Booster?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

---------

Where is Power Brake Booster located on Car?

http://howtobyme.blogspot.com/2011/12/where-is-power-brake-booster-located-on.html

---------

How to Replace Power Brake Booster on 1996 GMC Jimmy?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-power-brake-booster-on.html

---------
These will help.
Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

Cost of replacing a 1998 Toyota Camry brake booster


Parts-$200
Labor-6hr Labour
Disconnect piping Flares nut
Drain Brake Fluid
Disconnect brake pedal assembly
Remove Brake Boost (4 nuts behind the Instrument panel)
Remove Brake Booster.
@$65/hr=$390


Jun 09, 2010 | 1998 Toyota Camry

2 Answers

Have to push real hard to make brakes work


HAVE THE CAR CHECKED FOR LOW BRAKE FLUID AS WELL AS THE BRAKE PADS....PROBLY NEED CHNGING

Aug 17, 2009 | 2000 Dodge Caravan

1 Answer

Brake boosters


you can tell if the brake booster is bad, rearly it goes bad, your master cyclinder usually go out before your brake booster will. It feel spoon-gy and while pressing down on the brake peddle holding it down you can feel the pressure bleed off with no resistance. If the brake booster is bad you have only ONE shot for braking each time; its very dangerous. Did you bleed the brake lines to release the the air out of the system when you replace the pad? whom ever did your brakes should know to bleed it. having air in the line can be dangerous as brake will not function and operates properly and can cause an accident. If you did bleed the brakes and your booster is fine then you have a master cylinder problems. master cylinder gives you a spoon-gy feel and when braking the peddle it tend to go to the floor and you have to let your foot up to build the pressure and applied the brake again to make it stop. Master Cyclinder use or rebuilt will cost you 30.00 bucks and new will be 58.00 bucks and they are easy to replace. Just make sure you have plenty of extra brake fluid to bleed all 4 brake line..I recommend you reused the brake fluid when bleeding the unit saving some money than wasting the fluid, glass jar is the best for capturing the bleed fluid with automotive smallest vacum hoses you can purchase at any auto discount store 58 cent a foot, which you only need 2 foot. good luck I hope that help some.

Jul 10, 2009 | 1998 Chevrolet Cavalier

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

1,091 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...