Question about 2004 Ford Focus

1 Answer

I had an accident i need a new front bumper, bonnet, front panel and head light my husband wants to try and fix it what tools would he need. or is it a job that needs done professionaly.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 305 Answers

Simple half inch drive socket set...set of ring spanners ranging from 8mm up to 22mm....size 10 to 16 star screw drivers, a small hammer, and a pair of pliers... job can be done by a novice, just dont rush it

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If you put a ladder in the back and drive down a bad road that what my front end sounds like 2005 dodge ram tried new shocks new ball joints checked it all ?


so what else is loose
check stabilizer bushes , bumper bar bolts , grill fittings , external lights , engine mounts , loose splash pan under front, mud flaps , inner guards loose , battery fitting, bonnet latch tight , body insulators on chassis frame , rusted body panels

Aug 21, 2016 | Dodge Cars & Trucks

1 Answer

How do I remove the head lig ht motor fro m a Renault clio


U will need to remove the front bumper un bolt the 3 bolts and voila the light is in your hand. The bumper is held on by a few screws if memory serves me there are two on the slam panel couple in the wheel arch and a couple under most are little t20 torqs screws hope this helps

Jan 22, 2015 | 2003 Renault Clio

1 Answer

2013 Volkswagen Beetle airbags did not deploy in my accident


The airbag technology uses many factors when deploying. If it doesn't see the need, they won't pop out at you possibly injuring you more than the small accident. When I was clipped on my rear corner and spun me around in the intersection, they didn't pop. But a head first hit popped them. The primary sensor is behind the front bumper

Dec 30, 2013 | 2000 Volkswagen Beetle

1 Answer

Ford focus 56year key wont open bonnet stripped out grill the lock cable and plastic connection to the bonnet catch is there in front of me but i dont know how to disconnect the plastic connection or...


I also have the same problem with a 2007 ford focus. I have been informed that it is a common problem and that the barrel needs to be changed. I believe it is necessary to open the bonnet by trying to remove the panel/ covers from under the front bumper. I managed to get the panel off by removing about 8 screws but I was still unable to open the bonnet.
If you have any luck, would you please respond.

Jan 01, 2010 | 2006 Ford Focus

1 Answer

How to change the headlight on a 2004 bmw 5 series


if you have an entire headlight assembly (in case of accident) remove bumper, there are 8mm screws on the inner lining of the fron wheel well where the fender plastics and the air dam connect to the bumper, undo the screws concerning the bumper on bot sides of the car. then remove the plastic cover under the bumper (either philips screw heads or 10mm) and then under the aluminum re-enforcement strip behind the bumper (access from under the car) remove the torx screws that hold the bumper aluminum to the car frame, get a friend to help you pull the bumper off evenly an then seek the 8mm screws that hold the headlamp in place. the headlamp comes off the car strait out the direction of the front. disconnect the wires and connect the new lamp and fasten to the car. then do the assempbly in reverse order for the bumper installation.
for just changing the bulb, there are some rubber seals behind the light where the bulb rests. there are metal clips than you depress to release the bulb. install a new bulb and then replace the rubber caps.

Nov 07, 2009 | 2004 BMW 5 Series

1 Answer

How do i install a bumper cover on a 1994 toyota coroll. Car involved in an accident but only the front bumper cover and the bumper lights were damaged. I looked up parts on line and think they could be...


Very easy fix for DIY, when you get the new bumper cover you will be able to see all the mounting points so you can find them on your ould cover easier. I did one on an Escort awhile back, my first cover to do, and had it done in about an hour, includding beer time :-)

Sep 10, 2009 | 1994 Toyota Corolla

1 Answer

Airbag dash light is on


yes sensors in bumper making light come on

Jul 29, 2009 | 2001 BMW 5 Series

1 Answer

I had an accident need a new bonnet my husband wants to try and fix it we need instruction and what tools do we need


If you have the replacement bonnet, & a regular socket set, it's a simple job of un-plugging the wash wipe tubes, and then undoing the hinges.
It's easier to use a small ratchet, to undo the bolts. Three or four each side, I forget. With more than likely, a 10mm socket.
Then it'll just come off in yer hand.
Then it's just the small issue of making sure the hinges aren't too badly mis-aligned, and 'marry up' with the bonnet fixing holes.
Then you need to close the bonnet to make sure it lines up with the rest of the car.
If it doesn't, then you need to bend the hinges, gently and slowly, with a big heavy bar, prefferably. But don't get too excited.
Then it's just a matter of repeating that, until it sits right.
Good luck with that.

Jul 26, 2009 | 2004 Ford Focus

2 Answers

Change the drivers side headlight on 1997 honda civic


you need to open bonnet ,take off the centre grill above the bumper unclipping the 5 clips then open the screw on each side of the bumper and then open the bolts on the light unclip the light wiring then take out the light and repeat the process putting it back in!

Apr 30, 2009 | 1997 Honda Civic

1 Answer

Check Engine Light is Staying On


I agree with timmyb187. The dealership will test for codes and see exactly what sensor might be putting that light on. Under the bumper are sensors for the airbag. There could be a harness that got cut because of the accident.

Jan 20, 2009 | 2005 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Ford Focus Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...