Question about 2003 Mazda Mazda6
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
well, with all that you have changed the only two possible things that are left PCM and the ECM....
Do you have an alarm system on this vehicle? If you purchased this car second hand it may have something that is inhibiting the engine from firing. From what you have told us here that would be where I would start looking.
I really hope this is helpfull
Posted on Aug 10, 2008
I would try a flush. If its set up like my 96, and it likely is, changing the trasmission gasket and filter will be difficult. Mine has a medal plug on the bottom and takes an allen wrench, and possibly a breaker bar. If you take out this plug, drain, flush then refill via the dipstick tube and a funnel, it may help. You may need to do this a couple of times due to fluid still in the torque converter, pan, etc.
Lucas is good stuff, I would add it again when I was done. The tranny fluid should be pink, mine looked like used oil black before I flushed it.
Also, when adding the new fluid, shift slowly up and down through all of the gears to lube well and check your fluid levels after 100 miles or so, as sometimes a bubble will form and make it look full....then not after it pops.
Posted on Dec 23, 2008
Judging from what i know, the timing on the engine is probably a bit off, and i remember reading the exact same problem on another web site and that is also what they said. So just check the timing on the engine or have it checked by a mechanic if you don't know how to do it.
Posted on Apr 01, 2009
Check transmission fluid. If that is full, try changing the fuel filter. It could be starving for gas, and trying to shift but can't. It could also be the speed sensor, or shift solenoid.
Posted on Jul 06, 2009
Tips for a great answer:
Jul 18, 2014 | 2002 Mazda Tribute
Jun 14, 2014 | 1998 Mazda 323 1.3
Dec 23, 2012 | 1990 Toyota Corolla
Sep 08, 2009 | 2007 Hyundai Elantra Limited Sedan
Aug 27, 2009 | 1998 Jeep Grand Cherokee
Apr 23, 2009 | 1996 Mazda MX-6
Apr 14, 2009 | 2005 Mazda 3
Feb 10, 2009 | 1993 Mazda Protege
Feb 18, 2015 | 2003 Mazda Mazda6
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: