Question about Ford Cars & Trucks

Open Question

Remove radiator on ford tractor 2000, 3 cylinder gas engine, 27 or 29 horse.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chrischronic
  • 235 Answers

SOURCE: Replace thermostat in 2000 ford ranger

the open pipe that you took the hose off of is the thermostat housing, you will need to remove this to reveal the thermostat, make sure you use a new gasket with sealant when reinstalling thermostat housing to prevent leaks and dont over tighten the bolts,run both bolts down as far as you can before final tightning

Posted on Dec 26, 2008

reisdos
  • 1297 Answers

SOURCE: How much fluid does the

total system is 14qts... this includes the radiator, hoses, core, block and head

just the rad is 5 qts

Posted on Nov 02, 2010

capcap101
  • 95 Answers

SOURCE: 2000 Ford Taurus number 6 cylinder filled with

blown head gasket

Posted on Dec 05, 2012

  • 2963 Answers

SOURCE: How do I fix a leak at the tubing connection. At cylinder on 1972 ford 2000 tractor

Gas or diesel? if diesel Highly likely, you may need a new line and possibly Injector. I hope it's not on the diesel injection end of the line. These connections are handling presures of 5 to 10 thousand psi, any miss alingment or cross thread or bad mating of the sealing (mateing) will leak and of course fail to fire on that cylinder.

Posted on May 25, 2015

  • 2885 Answers

SOURCE: 1968 Ford 2000 tractor. How can I remove radiation?

I am sure there are a number of forums dedicated to classic tractors that could give more precise answers than you will find here.

I have very little experience of agricultural tractors so I won't even begin to guess. If faced with the task of removing a radiator I would hope it would be a fairly intuitive process. If the radiator cannot be removed downwards, which if memory serves would mean removing lots of heavy stuff, then it must be removed upwards or sideways and that will mean removing body panels and cowlings, a much lighter prospect.

Posted on Apr 08, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1968 Ford 2000 tractor. How can I remove radiation?


I am sure there are a number of forums dedicated to classic tractors that could give more precise answers than you will find here.

I have very little experience of agricultural tractors so I won't even begin to guess. If faced with the task of removing a radiator I would hope it would be a fairly intuitive process. If the radiator cannot be removed downwards, which if memory serves would mean removing lots of heavy stuff, then it must be removed upwards or sideways and that will mean removing body panels and cowlings, a much lighter prospect.

Apr 08, 2016 | Ford Cars & Trucks

2 Answers

How can you determine what engine you have in a 2000 ford focus zx2


One engine and two gearboxes from a quick search


http://www.thecarconnection.com/specifications/ford_escort_2000_2dr-cpe-zx2


http://www.automobile-catalog.com/make/ford_usa/zx2/zx2_coupe/2000.html

Nov 15, 2015 | Ford Cars & Trucks

1 Answer

Cant find where theThermostat is on my car


follow radiator hose to engine cylinder block should see thermostat houing. the four cylinder engine you have remove exhaust manifold heat shield and remove coolant inlet pipes from the thermostat housing.also the four cylinder engine you have to raise vechicle support on jack stands you have to remove engine to transaxle support brace first before you can remove coolant inlet pipe from the radiator hose to thermostat housing.

Jan 27, 2013 | 2000 Oldsmobile Alero

1 Answer

Engine management light stays on


check whether you do have a smell of fuel or burnt gasket in the radiator after remove the cap. If so then you have an overheated engine and blown gasket. Or check whether if you have either water in engine oil or vice versa. Having any of the two,surely you have to remove cylinder head for renewing cylinder head gasket etc.

Oct 15, 2012 | 2001 Ford Focus

1 Answer

# 5 cylinder wont fire, i dont know which cylinder is #5. 2000 ford expidition


looking at the engine from the front. #5 will be the first cylinder nearest to the radiator on the drivers side. by the way its probably the cips(coil in plug) thats bad. once your replace the cips the computer has to relearn the firing sequence. it will take about 3-5 restarts before this will happen. i just did this to 3 cips this past january. easy fix.

Apr 20, 2010 | 2000 Ford Expedition

1 Answer

My ford ranger keeps running hot. I can drive it and after about 30min. there is not water in the radiator.


Ok ~ Things to check are (simplest first)
1. Examine radiator cap for damaged or leaking seals. (Have it tested at your radiator place.
2. Check for water leaks. At the radiator, rubber hoses including heater hoses. Also cabin heater radiator core.
3. Top up radiator and run engine without the cap fitted. Blip the throttle and see if any bubles or traces of gas appear when you look in the top tank. During this test, check that the top tanks turns "hot" as the thermostat opens. If not, remove and test/replace thermostat.
4. Have a "cylinder leakage test" done at your repair shop.
5. Have the cooling system pressure tested.
6. Add coooling system ceaner to the system and drive for about 30mins. Next, reverse flush radiator and engine block.

This list is in the order you need to procede, and next step should be performed only after the the preceding step tested ok.

Apr 18, 2010 | 1993 Ford Ranger SuperCab

1 Answer

Replacing an anti knock sensor on a 2000 ford


remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley

Jan 29, 2010 | 2000 Ford Focus

2 Answers

Misfire on 2000 Ford Exp 5.4l triton engine


what is the missfire code, has the recall been done for the leaking heater core coolant hose? the leak drips onto the passenger side ignition coil and shorts it out and causes a missfire.

Oct 20, 2009 | 2000 Ford Expedition

5 Answers

Where's the number one cylinder on a ford f-150 truck?


Select your Engine for Ford Pick-Ups/Expedition/Navigator 1997-2000...

cf75b46.jpg

Ford 4.2L Engine Firing order: 1-4-2-5-3-6 Distributorless ignition system

d401c97.jpg

Ford 4.6L Engine Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition system

aa812aa.jpg

Ford 5.4L Engine Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition system (one coil on each cylinder)

5d2d834.jpg

Ford 5.8L Engine Firing order: 1-3-7-2-6-5-4-8 Distributor rotation: Counterclockwise

7af8e86.jpg

Ford 6.8L Engine Firing order: 1-6-5-10-2-7-3-8-4-9 Distributorless ignition system (one coil on each cylinder)

3e29322.jpg

7.3L Diesel engine injection order: 1-2-7-3-4-5-6-8

0d6e880.jpg

Ford 7.5L Engine Firing order: 1-5-4-2-6-3-7-8 Distributor rotation: Counterclockwise


I hope help you (remember rated this help) good luck.

Sep 14, 2009 | 2000 Ford F150 Flareside SuperCab

1 Answer

Better engine performance and gas mileage


try either a cold air intake or a chevron....a chevron is a cylinder with slots cut like arrow heads which will remove air turbulence....that alone will increase your performance at least 25% and horse power about another 40 to 50.
go0od luck

Jul 05, 2009 | 2006 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74269 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

fordexpert

Level 3 Expert

5426 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...