Question about 2002 Lexus ES 300

1 Answer

Rear tailight assembly, the one in the window.where do i access?

Rear tail light assembly on my 2002 lexus es300 i want to know how to access this as i have the rear light out, its the one in the back window. i dont see any way into the assembly. no screws in the plastic, also, i have looked under in the trunk in the undermounting but cant find anything. no generalities please only answer if you know for sure! thanks alot!

Posted by on

  • lanelle250 Jul 30, 2009

    i have it off, now i need to know how to replace the bulb (which is connected) i need to know whether to unscrew it and then unclip it or if it just unclips out.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

It's interlocking and clicks out

Posted on Jul 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the rear bumper on a 2003 hyundai sonata


You have to remove four screws near the center of the rear bumper that are visible when you open the trunk. Then remove the inside upholstery cover for each rear tail light and then remove the four brass bolts that hold each rear tail light assembly. Unhook the wiring harness so the tail light assembly can be removed and laid aside. Then remove the two screws on each side which were covered by the bottom of the tail lights. Next, remove some of the upholestry retaining pins close to the rear tailights so you can access the spcae behind them. You need to remove two brass nuts close to the outer aspect of where the tailights are located and two screws that are located several inches farther forward that are holding the more frontal aspect of the rear bumper on each side. Finally, remove two retaining screws at the bottom of the most forward aspect of the bumper (wheel well) and one at the top of the most forward aspect of the bumper and you should now be able to remove it! Hope this helps! John in Lexington

Jul 20, 2012 | Hyundai Sonata Cars & Trucks

1 Answer

HOW DO YOU CHANGE THE TAILLLIGHT BULB ON A 2002 LEXUS ES300?


open the trunk, look behind the tail light assembly, if any carpeting exists move it out of the way to reach screws that link to the light assembly, remove them, and the assembly should pop off, then simply remove the old bulbs and put in the new ones. make sure you have the correct size. check modifiedlife.com for size.

Jun 08, 2011 | Lexus ES 300 Cars & Trucks

1 Answer

How to replace right rear taillight assembly


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Apr 01, 2011 | 2002 Lexus RX 300

1 Answer

I have a Lexus ES300 , and it needs a new tail light bulb installed. I'd like to do it myself - What is the best way to access the bulb?


some cars you have to remove the tail light assembly to do it, the best way is open your trunk and see if you have access to the light bulbs, you have to twist them to take them off, good luck

Feb 20, 2011 | 2000 Lexus ES 300

1 Answer

HOW TO CHANGE A HIGH TAIL STOP LIGHT


open truck. remove access cover on tailight assembly. Turn the plastic tail light plastic bulb holder 1/4 turn, pull out burned bulb.

Feb 01, 2010 | 1998 Lexus ES 300

2 Answers

How do you replace the tail light bulb on a 2000 Lexus ES300?


2002 security light keeps coming on, is there any permanent fix
besides turning key on for ten minutes

Nov 05, 2009 | 2000 Lexus ES 300

1 Answer

I would liekt o know wheere the fuse to the rear right blinker light is in my 99' Lexus ES300? Ccan some one help me with this?


there is not a separate fuse for the right rear turn signal, its probably the bulb. you will need to remove the tail lamp from the vehicle to get to the bulb

Sep 11, 2009 | 1999 Lexus ES 300

1 Answer

How to change tail light bulb on 1999 buick lasabre


Remove cover from rear of trunk to access nuts. Remove tailight all 4 nuts. Pull tailight out. You will see the bulb sockets behind the tail light assembly. Turn counter clockwise to remove socket. Install same way.

Jul 26, 2009 | 1999 Buick LeSabre

1 Answer

2002 Lexus ES300 - Replacing the driver's side outside rear tail light


Easy. You can do it. Nothing special other than the clips that hold it in may be tight.

Aug 12, 2008 | 2002 Lexus ES 300

Not finding what you are looking for?
2002 Lexus ES 300 Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...