Question about 2005 Dodge Ram 1500

1 Answer

I just replaced one of my front wheel bearings and now the ABS and Traction Control lights still come on about every 3rd time I start the car. Did I get a bad part or do I need to do something else like clear the codes from before?

Posted by on

  • Joe Alexander
    Joe Alexander May 11, 2010

    try clearing the codes and go from there

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Might try to disconnect the battery and pump the brake 3-4 times then hook the battery back up and see if that clears it. If not could be a loose connection or just a bad part

Posted on Jul 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed bearings and abs light and stabletrack still on do they reset after u replace the bearings and if so how long


Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban
Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...
Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...


Dec 12, 2015 | Cars & Trucks

1 Answer

My service traction light is one and my abs light is on


The abs makes the traction control work so fix the ABS first. The most common thing thea haqppens are the wheel speed sensers fail. In the front wheels the speed senser is incorperated into the front wheel bearing. these bearings are well known to fail at about 100 thousand miles and can fail aqs early as 80 thousand miles and most all of them fail before 140. You might notice a roaring sound ( like noisiy treaded tires) You can jack up one front wheel at a time and get in the car as your driving it and put the car in gear and run the car ( not moving but thwe trie is turing and listen for noise. I fht e wheel makes a roaring sound that gets worse as you go faster that wheel bearing is bad. Don't go over about 50 as with one tire on the groung the other that is turning, is going twice that fast or 100 MPH at 50 on the speedometer. Do the same test on the other wheel and if it's quiter or quite just change the noisy one. Once changed you just drive the car and the new wheel speed senmser will be reconized and the ABS light will go out as will the trac off light. If your ready to change both wheel bearings do so as they both have the same miles on them just not nessarily the same potholes and other rough pavement that makes them wear out faster. If thebearings are quite then you need to inspect the wires coming outr of the back of the wheel bearing.. Thjese wires get into troble and get unplugged or break the wire. If you havwe asscess to a scasnner that will address ABS systems it'll point out the ABS problem. Things that happen other than the wheel speed sensers are fuses blown for other reasons. The accumulater motor failure or extreamly cold weather the accumulate motor locks up in cold and blows the fuse. Thwe motors seldom fail but they can and do. Some veicals are nerer serviced and the brake fluild accumulates moisture ( as it's supossed to) and peaple never get the brakeing system seviced and the old brake fluild can freeze in cold weather and start croduing things. The Traction control sysem uses the brakes to control wheel spin by puting on the brake on the spinning wheel. If the system notices a wheel spinning. (Using the wheel speed sensers) So until the ABS is fixed don't try to fix the traction control system as it truly is part of the ABS systyem.

May 18, 2011 | 2004 Chevrolet Monte Carlo

1 Answer

Replaced both wheel bearings on van but abs light coms and traction control light comes on all the time all it does it sounds like grinding all the time


it sounds like the bearing might not be seated properly. if so the sensor for the abs and traction control will not get a signal and the lights will come on.

Apr 25, 2010 | 2004 Pontiac Montana

1 Answer

ABS light is on all the time as well as Traction Control light. Grinding occurs while driving


with traction control set up cars abs and tranction control sensors are in the wheel bearings when a wheel bearing goes out grinding will come from front wheels and will ruin abs and traction control sensors causing the malfunction. Most likely by your description this will be it.

Mar 18, 2010 | 1996 Chrysler LHS

1 Answer

ABS TURN LIGHTS COME ON


need to get abs codes read. it will tell you what wheel to look at.
1.bad wheel bearing, sensor is part of bearing.
2.broken wires to sensor.
3.traction control part of abs

May 06, 2009 | 2004 Cadillac CTS

2 Answers

2001 impala abs brakes light comes on only when you go thru water


The traction control system uses the abs wheel sensors to detect wheel speed if the abs light is on the entire abs system will disable giving you regular braking but it will also stop feeding info to the traction control

Dec 04, 2008 | 2002 Chevrolet Impala

2 Answers

2007 Chevrolet Uplander LT ABS and TC light on


We were having this problem...have your wheel bearing checked out. There was a sensor in the drivers side wheel bearing...once we replaced it (because it was going out) the ABS and Traction Control warning lights stopped coming on.

Dec 02, 2008 | 2007 Chevrolet Uplander LS Minivan

1 Answer

Traction Contrl and ABS Light on


No, it is probably not related. Usually the ABS and traction control light is either a wheel sensor problem, located in one of the wheel bearings, or most likely in the wire harness from the wheel bearing sensor. Remove wires and spray clean with a good solvent electric spray, and check the condition of the receptacle. I have had these problems with my 02 AWD so many times it has become almost routine. GM really have a problem with this type of speed sensor in the wheel bearings. In the AWD model, it keeps the car in FWD if the ABS light is on for any reason. JUNK!

Nov 19, 2008 | 2002 Chevrolet Venture Passanger

6 Answers

2005 Impala abs & traction control problem


2005 Impala it turn off some times when I am coming to a complete stop or when I am slowing down but it starts right back up with no problem can you help me

Nov 10, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...