Question about 2003 Ford Mustang

2 Answers

03 mach 1 cranks no start

My 03' Mustang Mach 1 will crank but not start. Car has only 5,900 miles on it. It seems like fuel pump is getting power and there is no fuel coming out of fuel rail. Car was running strong and then engine sputtered and would not restart. Tried to get Ford to help me but there rep said car is out of warenty and tough.

Would Appreciate Any Help








Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 617 Answers

Check for spark while turning the engine over, no spark? Have the computer scanned,possible crank position sensor failure.

Posted on Jul 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 353 Answers

A 6 year old car with only 5,900 miles on it would indicate that it was sitting for long periods of time. I would check the fuel filter first if it does not seem to be getting fuel.

I would also check the fuel pump shut off switch, should be located in the trunk on the drivers side. (owners manual will tell you for sure)

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset the anti theft on a 03 mach 1 mustang gt


your anti theft device is activated,you need to lock and unlock your doors a couple times with the key fob,not the key,and then you need to put the key in the ignition and start it,if you dont have your key fob,call your car dealer to get a new one,they are programmed for each car only,you cannot bypass it.

Jun 16, 2015 | Ford Mustang Cars & Trucks

1 Answer

Car wouldn't restart even after I had just driven it and it drove well


hard starting, cranking 3 times to start, engine lite finally came on---
1. shows problem with coil--changed
2. problem with O2 in block--- changed.
3. did a fuel pressure check on original pump--- replaced with new fuel pump
3000 miles later had same problems did a fuel pump pressure test again and it would not hold pressure.
upon removing 3000 mile pump it was hot to the touch so it must have burnt out.
just installed another new one (12000 miles/ 1 year warantee)

Jul 16, 2013 | 2000 Daewoo Leganza

3 Answers

I have a 1990 mustang lx 5.0 and i've been recently having problems trying to start my car,?


Click and no crank you need to go to the battery and ensure they are connected well,If the car just click check the battery terminal and do you have a clean connection remove any grime on it,Get the car to crank and if you do get it to crank and you still dont hear the fuel pump I want you to direct the fuel pump through the OBD 1 connection.I also would like you to gather a code by counting the flashing light,Do you have this connection it on the right side front3_31_2012_6_14_26_am.jpg

Mar 30, 2012 | 1990 Ford Mustang

1 Answer

2002 Mustang GT.No fuel pressure at the Schroeder valve.How can I confirm it is my fuel pump? The pump assembly is expensive & I want to confirm it is the pump.


You can check for power at the connector for the fuel pump while cranking, if you got power but no fuel you have bad pump. Also have a friend crank on the car while you bang the bottom of the tank with a rubber hammer, sometimes it will jar the pump just enough to get it running again.

Apr 15, 2010 | 2001 Ford Mustang

1 Answer

How to install a clutch in 2004 mach 1


due to the amount of work involved i would get a haynes or chilton manuel at local parts store, it will give you a step by step guied and all torques involved they run about twenty bucks. berrydalewolf

Oct 30, 2009 | 2004 Ford Mustang

1 Answer

2003 stalling mach 1


clean or replace IAC idle air control valve

Aug 17, 2009 | 2003 Ford Mustang

4 Answers

1992 ford mustang...wont start


i have the same problem wit my 92 gt,,,just today it happened,,,"cranks but wont start"= IGNITION SWITCH,,,it has spark, fuek pump and fuel pressure is all good,,,

Nov 16, 2008 | 1992 Ford Mustang

Not finding what you are looking for?
2003 Ford Mustang Logo

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...