Question about 2005 Jeep Grand Cherokee

1 Answer

How do you fix the seat belt if its stuck in the gears

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 105 Answers

Just spray either liquid wrench or either WD-40 onto the gears and work it back and forth with a long screwdriver and it will eventually come loose.

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a stuck retractable seat belt?


You can't it is not designed that way. The seatbelt mechanism is damaged and needs to be replaced.

Feb 21, 2016 | 1999 Chevrolet Blazer

1 Answer

How do I fix a jammed seat belt in a ford escape?


Explain... is the seat belt jammed with the two sections connected or is the button stuck down.

Jun 22, 2015 | Ford Cars & Trucks

2 Answers

How do I release a stuck new seat belt retractor?


You are probably pulling belt at the wrong angle and it won't release. Pull with easy steady tension, trying a different angles and it should come free for you. If it doesn't, then take it back to SEAT or VW, they can show you in 1 minute how to free it. Since it's a mandatory safety device, there should be no charge unless it requires replacement.

Apr 04, 2015 | Seat Cars & Trucks

2 Answers

Stuck drivers seat belt. is there a simple fix?


The simplest fix is to fit a new belt. Don't mess around with seat belts, your life is worth much, much more. Some manufacturers are starting to suggest a seat belt replacement after 3- 4 years.

Mar 11, 2015 | 2008 Toyota Tundra

1 Answer

How do I release the rear seat belt that is stuck to the back of the chair


you will have to be patiant with this as long as the seat belt tensioners havent gone try to pull the belt so some tension comes of it so it can roll back into the spool or jiggle it by bulling on it quickley should be a simple fix hope this helps

Aug 18, 2012 | 2007 Hyundai Santa Fe Limited

1 Answer

Holden Astra 2002 Rear middle seat belt stuck


The only thing a Dealer will do is replace the entire seat belt so I suggest you unbolt it and buy a new one then Fit it yourself

Nov 27, 2011 | Cars & Trucks

2 Answers

How can I un-stick a stuck seat belt. It worked fine last time we used it and does not seem to be twisted. 2001 chevy blazer


If it is stuck in the seat belt clip (meaning its buckled) then that model year had a seat belt buckle recall for failure. If its stuck in the seatbelt retractor and your seatbelt retractor is floor mounted there is a release pin on the ratchet gear. TO access it you will need to remove the plastic cover located at the floorboard next to the door on the side of the car that is stuck. If its a seat mounted retractor this means the retractor mechanism is located within the seat frame. You will need to view the bottom of the seat of the belt and see the anchor point. Seatbelts must be anchored to frame of car. Trace it into the seat back. If its located in the back of the seat you will need to remove the seat cover to the extent to reach the mechanism. This can be located at the bottom of the seat.. but more than likely is located at the shoulder area. The Seat cover (fabric) is removeable via clips located at the base and tucked into the seat (think hidden bra/pant clip style connectors or zipper) If you have leather seats it is a bit more detailed and more difficult to manage the seat covers. Typically your local Chevrolet dealer mechanic can get this done in 10 minutes (based one experience) and quite possibly wont charge you or charge you minimally. The downside to this is if its locked that means the same gear that locks it in an accident was frozen in place somehow and this typically indicates a dirty dirty spring or broken spring mechanism. The locking pin operates on centrifugal force and activates based on speed by which the seat belt is pulled out. (just a bit of knowledge) Good luck

Jun 15, 2010 | Cars & Trucks

2 Answers

How do you fix a stuck seatbelt in front seat passenger side? The seatbelt has retracted but will not release outwards to enable its use. We have pulled off interior cover of the seatbelt to get access to...


this is a simple repair many dont know. remove or pull off plastic pillar post cover, seatbelt probably twisted inside. twist it back around so it runs flat and lube slightly with a light lube spray on metal gearing. i had the same problem w mine pk

Jan 16, 2010 | 1998 Ford Taurus

1 Answer

How to fix a stuck seat belt VW GTI 2009


I just solved the problem for a stuck rear center seat belt in my 2002 Jetta.

Flip the base seat cushion forward against the front seat backs. Trace down along the belt to its tether point on the floor. The belt is sewn around a steel loop. The loop is anchored to a black steel hook. A thin silvery retainer plate is spring tensioned on top of the loop to prevent it from sliding off of the hook when the seat back is folded.

Therefore, you need to press the silvery retainer plate away from the hook (push up) to allow the loop to be slid from the hook. The belt was tight with the seat back in the upright position, so it was necessary to fold the seat back forward to create slack in the belt. Now push the belt loop towards the trunk and slide it off of the end of the hook (only possible with the retainer plate pushed up out of the way).

Now with total release of tension on the system via the bottom end of the seat belt being untethered and with the seat back returned to the upright position, normal extension and retraction of the belt will be reestablished. Next, simply extend the seat belt and slide the loop back into place over the floor hook. It snaps past the silvery retainer plate without all the effort required to hold the plate up during removal of the loop during disassembly.

Check again, the seat belt should be extending and retracting properly. Now just put the seat cushion back into regular position and you will be able to safely buckle up three people across the back seat.

It took about as long to do this repair as it has taken to post this answer to the problem. Note, the seat belt safety mechanism only allows normal extension and retraction of the belt when the seat back is upright.

Nov 29, 2009 | Volkswagen GTI Cars & Trucks

2 Answers

Volvo V70 rear seatbelt jammed


i know this sounds rough, but pull the seat belt with both hands as hard as you can, this will more than likely free the seat belt, some of the seat belt may have jammed in the gear inside the roller box.......

Nov 24, 2008 | 2001 Volvo V70

Not finding what you are looking for?
2005 Jeep Grand Cherokee Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...