Question about Ford F-150

1 Answer

No head lights New Bulb New switch New fuses Still no head lights High or Low

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

You must check the dimmer swich to see if power is going in and coming out.

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

1 Answer

2001 ford ranger , no high or low beam lights


Check the On/Off switch on the dash, steering column, and the steering arm/lever is connected properly and that the lighting cable's are cable connectors are connected and not corroded.
1, To check the Earth: Connect a cable from the earth of the bulb to the chassis/body/ metal part of the car.
2, Using a Test lamp: Disconnect the cable that connects the power to the head light bulb, Connect one end of the test lamp to any one of the connectors at the end of the cable that plug's into the bulb. With the low beam on, only one of these wire's will the light switch turned on will light up the test lamp bulb. If none of the cable's light the test lamp bulb. the problem is in the High beam relay, and possibly the Low beam relay as well.
One Head lamp relay: If one cable show a light in the test lamp, check the earth cable on that lamp.
Two Head lamp relay: If two cable's show a light in the test lamp, check the earth cable on that lamp.
Some of the car's electrical systems use the Steering column as an earth point. Check the switch.
In many cases are what is called Earth return (this means that the positive power (+) is supplied by one wire, and the negative earth (-) is connected via another wire) this is to reduce the problems of the rust effecting the power flow.
Get the wiring loom layout in the Cars book
Sorry I can't be of more help

Jan 13, 2014 | 1998 Ford Ranger SuperCab

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

Fludic verna headlight is very poor???chould i add cutout and use more 100/90 w bulb to get more light...which cutout brand is good


The standard lights are quite good enough if the reflectors and lens are really shiny and not partially rusted. Large bulbs run the risk of melting the plastic reflectors costing new head lights. Adjusting the head lights to correct beam height will also help. You can use relays in the system. Disconnect the wires to the back of the bulbs and attach then to the trigger pins of the relay (4 relays-2 high beam L+R and 2LBeam L+R). Run fused power wires from the battery to the power pin of the relay and out to the beam pin of the bulb. earth the bulbs as normal. The operation works like this You switch on the lights to low beam and the power from the switch energises the relay and drops in the contacts which allows power from the battery ,through the bulb low beam to earth. Switching to high beam energises the relay and allows power from the battery through the relay and out to the high beam part of the bulb through to earth. You have full 12 volts to the lights and reduced current through the light switch. 4 relays --1 each for each light low and 1 each for each light high. jump the wire from each beam position between relays of the same light so that they work off the one wire from the switch

Dec 10, 2013 | 1991 Suzuki Swift

2 Answers

2003 GMC Envoy low beam head lights will not come on. The bulbs are not blown, fuse's ok, no power coming to the head light connector. minimal power to the fuse compartment with fuse removed. 9 to 10...


The problem is a Headlight module. Fuse box under the hood has two black modules side by side, the one on your right is the headlight module the one on the left is the fan module. Try swapping them, if the headlights work replace bad module, don't drive vehicle with the bad module in the fan slot. Mine kept going bad because I had a high intensity bulb on one side.

Oct 02, 2011 | 2003 GMC Envoy

2 Answers

My low beams keep shutting on and off but high beams are fine


this could be solved by taking the bulb out of its holder and cleaning the contact of the bulb and holder.
turn the ignition on after this with the bulbs in the holder and plugged in but not in the headlight kitself.Turn the lights on and see if the work if still the same try moving the bulb while on in its older and see if its just loose. if so holding it one way it will work. wedge something something to hold it in place or buy a used bulb holder.
Check the fuses at the same time and the wire plug that powers the bulb. check and clean the contacts of these also
Let me know how it goes and ill help again if it persists.
bakerboy11@hotmail.com
Automobile

May 17, 2010 | 1994 Dodge Ram

2 Answers

2005 impala lowbeams do not work at all. high beams, turn signals, and taillights are fine. i cut the negative and grounded it on the car and now the headlights are on but will not shut off unless i take...


ok put the ground back were you cut it and remove bezel near head light switch test powers in and out with 12 volt test light on low beam and high beam you may just have a bad head light switch make sure you have headlight power coming out of the swicth for low beams.

Mar 20, 2010 | 2005 Chevrolet Impala

1 Answer

I own a 1995 honda odyssey minivan and the drivers front head light is not working because of the wire connection? what do i do to fix this problem because I got stop for having only one headlight? thank...


hello annette from uk you think it may be connection ?? is head light not working on dipped beam? but high beam ok ? if so it may well be the low beam element in h/light bulb has blown however you could also check the fuse as each side head and sidelights have their own fuse check handbook for position of fusein box if ok then you can try the other head light bulb from other side into the plug connector of drivers side and if this works on high+low beams ? your old bulb is blown feel sure you can do these checks !? approx price of new bulb in uk £4 -50 but carry out above checks !st b 4 you buy bulb ? if it is a bad connection on plug ? another bulb will have same problem hope you understand all above ? and wish you good luck from n/west uk

Oct 30, 2009 | 1995 Honda Odyssey

1 Answer

Night driving head lights not turning on.


yes it could be a bulb. If you have any power going to the light then its not the fuse. the next place to look is the light switch. and the mounting bracket that the light switch plugs into. If its a newer car, then just the switch. So replace your bulb and see how it goes.

Feb 03, 2009 | 2002 Toyota Tundra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...