Question about 1996 Chevrolet S-10 Pickup

1 Answer

When i push the brake pedal down the brake lights will not work. The rear turn signals work fine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,776 Answers

Check the fuse in the fuse box for the brake lights. If the fuse is good, check the brake light switch below the brake pedal with an ohm meter to see if the switch is defective. Sure hope this helps and best wishes.

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

1994 Chevy C1500 truck. No rear brake lights


Most likely this is a brake light switch issue. Replace switch.

If your emergency flashers don't work, all flasher bulbs are fine, but flashing too fast, then check and replace Hazard light switch.

Oct 29, 2012 | 1994 Chevrolet C1500

1 Answer

I have a 1999 gmc suburban 4x4. All rear lights and license plate lights are not working. All fuses are good as well as all light bulbs. Any ideas what the problem could be?


Sounds like a faulty signal switch.Here's a way to check it,hold the brake pedal down while pushing down on and wiggling the hazard switch.If the brake lights come then replace the signal switch.

Apr 30, 2012 | Nissan Sentra Cars & Trucks

1 Answer

2005 chevy venture brake lights not working. 3rd light works. fuse looks good. changed switch. what left to check?


Try this push down on brake pedal while you push in or wiggle the hazard switch.If the brake lights come on then that means you turn signal switch is faulty.

Jan 15, 2012 | 2005 Chevrolet Venture

1 Answer

1998 cavalier, back turn signals do not work, replaced bulbs, front turn signals work, brake light does not work. but brake light works inside the car on rear window.


OK try this turn the signal light on one side or the other then push brake pedal if brake lights come on replace the turn signal switch

May 10, 2011 | Chevrolet Cavalier Cars & Trucks

2 Answers

1999 ford explorer the 2 lower brake lights won't work but the 3rd upper brake light works fine ...... whats wrong ???


check the rear lower bulbs, if good nore than likely brake lamp switrch on brake pedal, 3rd lamp rns of separate circuit

Aug 13, 2010 | 1999 Ford Explorer

3 Answers

No brake lights when i push the pedal


Its the signal light switch on the lever.
THe signal switch has all connections relating to the brake lights!
solution play around with the lever and see or get someone to see the brake lights work with the brake pedal down.
My car does the same thing! when i move the lever towards activaiting the high beams the brake lights work.
just gently push on the lever to see the lights go on.
you have to replace the switch and requires removing the steering wheel without setting off the airbag.

Mar 28, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

2005 Dodge Caravan . Brake lights stay on !


Try pulling back on the brake pedal if lights go off then either switch adjustment or the brake booster is allowing the pedal to drop down if it's running (vacuum) or brake pedal mechanism is binding.

Jan 25, 2010 | 2005 Dodge Caravan

2 Answers

Rear turn signals and brake lights out. Front signals and rear tail lights work fine.


the brake lights and the rear turn signals should be the same bulb check the bulbs to make sure they are not blown does your third brake light work if all brake light are out and the bulbs are good check the brake light switch on the brake pedal

Nov 04, 2009 | 1986 GMC C1500

1 Answer

Brake lites out, turn signal and rear lites ok fuses good bulbs fine


its down near the pedal I think. Put your ear down near the pedal & push the pedal down with your hand, You should be able to here the switch/button clicking

May 10, 2009 | Toyota Corolla Cars & Trucks

Not finding what you are looking for?
1996 Chevrolet S-10 Pickup Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...