Question about Chrysler Concorde

2 Answers

2000 chrysler concorde 2.7 timeing went out sat 1 yr put new chain all intake valves have car running but miss at 38000 rpm and wont acelerate passed 4000 rpm cleared codes at times po171 pops up has heavy hesitation at 3800 and 4000 but runs ok any where before 38000 rpm

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How can you tell if the timing is out?

Posted on Jan 12, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

P0171 system lean bank 1. Check for vac leaks at all hoses and at intake maniflod. Check fuel pressure.

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 concord, 2.7 engine v6 crank engine 1st time wont start. Turn key off and crank again and will start.. If warm engine and not sat long will fire first crank.


Test the fuel pressure regulator. It has a check valve in it to maintain fuel pressure when the engine is not running.

Dec 19, 2016 | 2003 Chrysler Concorde

1 Answer

Wont rev 3000 rpm


rpm sensor bad this keeps the car from over tacking.

Feb 26, 2014 | Chrysler Cars & Trucks

1 Answer

Missing, rough running, idle changes from 500 to 2000 rpm


i would say your best bet is to clean out your idle air control valve. sounds like its getting stuck open or closed

Sep 05, 2011 | 2001 Chrysler Concorde

1 Answer

I MOUNT TIMING CHAIN FOR ESTEEM 99 1.8 LITERS Y HAVE PROBLEM WHEN ACELERATE MY CAR FAIL IN THE ACELERATION THE SPARK BURNING BLACK AND WHEN GO TO 7,000 RPM THE CAR NO MAKE RELAY ALONE GO TO 7,000 RPM OTHER...


The timing marks are not properly aligned or the distributor is not aligned properly.

You'll need to get a service manual for the exact settings, make sure that after you set the marks you rotate the engne 2 complete revolutions & recheck the marks prior to reassembling the covers. Double check the distributor timing as well & check for any possible vacuum leaks from hoses or gasket problems.

If your chain had broken originally, then you possibly have some upper engine valve damage that will have to be diagnosed. A compression test will reveal any bent or broken valves.

good luck

Feb 14, 2010 | 1999 Suzuki Esteem

1 Answer

My 2001 chrysler concorde 2.7L started running really rough and now I cant start it. It tries to start but sounds as if the timming chain has jumped a notch, and how do I check the trouble codes. could it...


Is it poping back threw the intake or exhaust? if so it could of jumped time, the massair flow sensor will cause it to run really bad as well. You need to test fuel pressure and replace fuel fliter then try it again if fuel pump pressuer does not pump to 40 PSI and hold for 40 seconds then the check valve in the pump is bad ad you will have to replace the fuel pump and sock. let me know about the back firing first.

Nov 08, 2009 | 2001 Chrysler Concorde

1 Answer

93 chevrolet truck bogging down on acceleration


Check intake gaskets. Pour warm soapy water on the gasket when it's running. If it bubbles like crazy, you have a leak. 2. Check timing. Shoot a timing light at the crank mark. If it jumps around a lot, your chain has jumped. #3. check cam. Remove valve covers, run the engine, and see if they are all raisng the valves the same. Put a piece of cardboard along the bottom, and fold it around a little, so it forms kind of a " half valve cover". That way you won't lose oil everywhere, and make a mess, or a fire.

Aug 27, 2009 | 2002 Buick Century

1 Answer

2001 chrysler concord 2.7 liter timing set


I have a similar problem. I just replaced the water pump and now the POS wont start. Like it is not getting fuel>

Aug 04, 2008 | Chrysler Sebring Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...