Question about Mazda MPV

2 Answers

My low beams are not working but the high beams are

My low beams are not working but the high beams and all other lights seem to be working properly. I have checked the fuses and bulbs and have found them to be in good condition. I don't know if this helps but when I have the low beams on the high beam dash light is on but no head lights are working.

Posted by on

  • Anonymous Mar 30, 2014

    Hi. I have high beam lights but no driving lights. Is this a fuse or blown bulb?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 14,036 Answers

IT LOOKS LIKE THE DIMMER SWITCH.

Posted on Jul 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Your Problem My be in the Dimmer switch take the care to advanced auto or auto zone ask the to do a code test on the car it's usely free if you have a pin plug under you dash they can pull up the code and tell you where the problem lies

Posted on Jul 26, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: LOW BEAM LIGHTS

Hi Rich Million,

Check the bulbs for the low beam problem and if they're ok, check the fuses under the bonnet (hood) which are found in the fuse box. If you've already checked those, go to the fuse box inside the vehicle.

Still no luck....remember that there are fuses and relays inside the cabin behind the kick panel.....You may find that there is a problem with the main fuse box.....If you drive over rough terrain, check the connections under the main fuse box....even if your roads are all smooth, it's still worth checking.....

Regards Johngee10

Posted on Sep 25, 2008

c17hydro
  • 2984 Answers

SOURCE: 98 volvo S70 low beam bulb replaced still no light

Easiest way would be to go back to where you bought it and make sure the bulb is installed that you bought....and show them. Ask if you can get a new bulb and change it in front of him. Call the dealership and talk to parts, ask if, indeed the hi and lo are interchangeable.

Posted on Mar 12, 2009

ourhowse
  • 2007 Answers

SOURCE: my low beam head lighjts do not work but the high

If you are absolutely certain the bulbs are okay, then change the switch. I would check for power at the socket first, to make sure it isn't bulbs.

Posted on Jul 25, 2009

  • 290 Answers

SOURCE: no low beams bulbs are ok fuses look good

There may be a relay that operates the low beam lights, check the owners manual to see if there is a relay, you should be able to hear it go "click" if there is one.

Posted on Dec 26, 2009

  • 85 Answers

SOURCE: '99 ford escort head light will dim when

The wiring harnesses in the plugs behind the bulbs are burned up seperate rear of headlight cover and inspect parts available at your ford dealer

Posted on Apr 01, 2010

Testimonial: "Right on! That was the problem, Thank you"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

2 Answers

Prius high beam lights work but low beam lights do not work?


On a 2008 Prius, If both High beams work but only one side has working low beams, then it is most likely a fuse. So before breaking your knuckles to change the bulb, check the fuse first. I found out the hard way as my mom distressed to me that her drivers side headlights were out. So without checking to see if low and high were working, I proceeded to remove and replace the bulb - ouch! There are 4 10 amp fuses that protect the circuits for low/high beam function. They are under the hood in the fuse box on the drivers side and they are marked on the box cover. Check them before changing the bulb.

Oct 29, 2012 | 2006 Toyota Prius

1 Answer

2007 pontiac grand prix headlights are not working correctly. High beams work but not low beam. nothing works on automatic. Low beam bulbs have been replaced. Lights worked for one day, then back to not...


I drive a 07 Grand Prix and the low beams randomly went out. Could not get them to come back on, but all of the other lights worked (inside, parking, and high beams). found a forum online that recommended replacing the fuse/thing at location #35 in the fuse box under the hood. It worked immediately!! Got the part at Advanced Auto parts for $35 dollars.

Aug 25, 2011 | 2007 Pontiac Grand Prix GXP Sedan

2 Answers

No headlights come on but high beams work as well as the other lights the fuses seem to be ok. Please help.


If your highbeams are working fine, you must be referring to your low beams not working I would simply check the 2 bulbs and make sure the low beam filament is good, theres a strong possibility that your BOTH low beam filaments are bad and require replacement of both headlight bulbs to get them working again its a very simple repair.....

Dec 07, 2010 | 1990 Mazda Protege

1 Answer

Passenger headlights only do not operate.


check the bulbs first and also the fuses theres a fuse for each side and for low and high beams, start there, good luck.

Feb 19, 2010 | 2002 Mitsubishi Eclipse Spyder

4 Answers

My headlights on my 2000 monte carlo does not work


Day time running lights run low voltage to the high beam bulbs so it sounds to me like you need two new bulbs or you need to check the fuses and see if any need replaceing.

Dec 07, 2009 | 2005 Chevrolet Monte Carlo

1 Answer

My headlights dont work,.all other lights are fine though,.is it the fuses or the bulbs? im not sure what fuses they would be,.there seem to be different ones for the same thing


do your flash to pass lamps light when you pull the stalk towards you? If yes, the bulbs are ok.
Do the hig beams work?
Your headlamps have sepaerate fuses for each headlamp and you have a low beam relay and a high beam relay under the hood in the black box.
If everything is out, I suspect a bad headlamp switch.
Check car-part.com and look on page with * for cheapest price.

Your owner manual will identify fuses & relays.

PS, You did not recently instal high current bulbs did you? If yes, put originals back in.

HEADLAMPS

The voltage is supplied to the lamp switch through a fuse. This fuse is located in the central junction box in the left-hand footwell.
When the headlamps are switched on, a voltage is supplied to the high beam/low beam switch and to the low beam relay. The relay for the low beam is located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "low beam", then a voltage is supplied through the low beam relay to the low beam part of the headlamp assembly. The left and right-hand low beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "high beam", then a voltage is supplied through the high beam relay to the high beam part of the headlamp assembly. The left and right-hand high beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.

----------------------------------------------------------------------------------------------------------
Lamp Switch
Removal
  1. s2y~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
    Remove the lower driver's side footwell trim.
  1. Detach the lamp switch bezel.
    • Remove two screws.
  1. Remove the light switch.
    • Remove three screws.
    • Disconnect the electrical connector

Feb 23, 2009 | 2005 Ford Focus

1 Answer

LOW BEAM LIGHTS


Hi Rich Million,

Check the bulbs for the low beam problem and if they're ok, check the fuses under the bonnet (hood) which are found in the fuse box. If you've already checked those, go to the fuse box inside the vehicle.

Still no luck....remember that there are fuses and relays inside the cabin behind the kick panel.....You may find that there is a problem with the main fuse box.....If you drive over rough terrain, check the connections under the main fuse box....even if your roads are all smooth, it's still worth checking.....

Regards Johngee10

Sep 25, 2008 | 1992 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

945 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...