Question about 2007 Mazda MAZDA6

1 Answer

Check engine light came on, all fluids good, changed 02 sensor, now temp gauge doesn't work and it's running hot on my 07 mazda 6

Posted by on

  • 1 more comment 
  • annawintour Jul 26, 2009

    I can smell it, and it just doesn't run correctly. I check the coolant every day, and it seems to may be losing some.

  • annawintour Jul 26, 2009

    I can smell it, and it just doesn't run correctly. I check the coolant every day, and it seems to may be losing some.

  • Dana Newcombe
    Dana Newcombe May 11, 2010

    If your temp guage isn't working how do you know it's running hot? Do you hear a pinging sound upon acceleration?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 32 Answers

You might have heard this,but check your fuel cap,if you did this,change your air filter,If that dont fix your problem,take your car to autozone and have them check the code,It doesnt cost anything.The temp guage is electronically sent to your dash,so check to see if it came disconnected off your thermostat,or from behind the inst,cluster.and check for any loose wires to the thermostat connections.

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Temp/gauge not reaching normal working temp-richer


the first thing to check is to feel if the radiator is hot, if the radiator feels hot and the engine is also hot the coolant is circulating ok then the problem is more than likely electrical, the temp gauge gets its signal from the engine control module the coolant temp sensor sends coolant temp signal to engine control module for engine managment purposes then passes it to instument pack/gauge, if the sensor was at fault you would have engine running problems also,with poss fault codes logged, if the engine and rad are cold/only warm after the engine has been run for 15 mins or so it sounds like the thermostat is stuck open but you have changed that. i have had faulty new ones in the past and have had to test them in a pan of boiling water, hope this is some help to you.

Apr 02, 2015 | 2006 Jaguar X-Type 2.0

1 Answer

I replaced my water pump in my 1999 gmc yukon my check gauge light stayed on and temp gauge stayed over to hot side. can i reset it?


Not exactly.
The check gauge warning light is on because the temp gauge is reading hot.
Does the temp gauge read hot as soon as you turn the key switch on, or not until the engine as run for a few minutes ?
If it reads hot without the engine being started, there may be a short in the wiring or the sensor may have failed.

Apr 19, 2013 | 1999 GMC Yukon

1 Answer

On a 2001 saturn L series, 2.2 litre automatic. gas gauge doesn't work and the temp light blinks continuously while the temp gauge needle jumps continuously. i've checked the coolant levels,th


For car running hot and overheating issues, I suggest to you go through this help links. Click this link below and go through the troubleshooting procedure to take care of the problems: ----Car runs hot? http://howtobyme.blogspot.com/2011/11/car-runs-hot-in-traffic.html
-----------All types of car overheating problems and troubleshooting?

http://technoanswers.blogspot.com/2011/11/all-types-of-car-overheating-problems.html
Car freeze overnight and started overheating while driving?http://technoanswers.blogspot.com/2012/01/car-freeze-overnight-and-started.html-----------Engine Overheats and heater blowing cold?

http://howtobyme.blogspot.com/2011/11/engine-overheats-and-heater-blowing.html

---------------------------
Car overheats and Air blows hot at idle?
http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html
--------overheating? http://schematicsdiagram.blogspot.com/2011/12/buick-century-overheating.html
----------Car engine Overheats and transmission starts slipping?http://schematicsdiagram.blogspot.com/2011/12/car-engine-overheats-and-transmission.html
----------This details will help.Thanks.

Feb 12, 2012 | 2001 Saturn L-Series

1 Answer

Temperature needle stays on the hot , have changed temperature sensor but it still stays on the hot and the engine is not overheating or leaking anything..what is making it stay on the hot


replace the thermostat,, and make sure that the fan engages , just because the fluids don't boil over doesn't mean the temp isn't to high, if your saying that the temp gauge is stuck on the hot setting, and doesn't move even when the car is cold,, thats a different problem,, if thats the case whats the make , model , and year

Sep 11, 2011 | Ford Thunderbird Cars & Trucks

1 Answer

The oil light sensor in my 1998 Mazda 626 is faulty. My mechanic says it is not worth spending the money to replace it. Can you tell me how to locate and disable it?


I don't know what your car is worth but the oil sensor runs about $9.00 and labor to install the new part is .6 of an hr to replace, you might want to find a new mechanic, also you need your oil light to work just like your temp. light or gauge those are two thing will kill an engine if you don't know what's going on. Good luck

Mar 25, 2010 | 1999 Mazda 626

1 Answer

Temp gauge soesn't work


IF YOU CHANGED THE FLUID AND THEN THE SENSOR FAILED IT IS BECAUSE THERE IS AIR IN THE RUBBER PIPING TO THE TOP OF THE ENGINE MANIFOLD. THERE IS A BLEEDE VALVE TO RELIEVE TRAPPED AIR AND ONCE THAT IS GONE THE GAUGE WILL RESPOND. YOU HAVE AN AIR BLOCK AND THE SENSOR NEED TO BE IN THE ANITFREEZE SOLUTION TO FUNCTION.

Feb 28, 2009 | 2002 Pontiac Firebird

1 Answer

Temperature gauge shows hot but the engine is normal operating te


replace temp sensor for the emission system. there are two on the engine.

Dec 26, 2008 | 1997 Subaru Legacy

1 Answer

Low Fluid light is on (Rad Fluid) Fluid FIne. Engine Temp HOT


this is caused by an erroneous signal from the low fluid sensor, replace it.

Dec 17, 2008 | 1999 Chevrolet Malibu

3 Answers

Tempeture gauge


this is one of three posabilitys or it could be the guage or the wirring to the guage

Oct 19, 2008 | 2001 Oldsmobile Silhouette

Not finding what you are looking for?
2007 Mazda MAZDA6 Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...