Rear view Mirror fell off a 2015 dodge charger i want to know if its fiaxable ive tried but have not succeeded

SOURCE: Replace side view mirror on Dodge Caravan

You will need to remove the triangular panel on the inside of the door on the opposite side of the broken mirror. Once you remove the panel, you will see the retaining bolts holding the mirror in place. Once you remove the bolts, the mirror can then be pulled out from the outside. Reverse the procedure to reinstall the new mirror.

SOURCE: nissan murano 2204 rear view mirror installation

Adhesive is available @ most auto parts stores. I believe it is a Loctite product (or equivilent). Just ask a salesperson and they should be able to help you, good luck.

SOURCE: Rear view mirror bumped and fell off - how do I reinstall?

Go to Auto Zone or any other auto place and buy some rear-view mirror adhesive its a kit with a cleaner and a clear glue it Works will re-attach mirror. Good Luck

SOURCE: rear view mirror fell off...how do i get metal

some have a small set screw in the center an allen screw or torks screw and some just slide in take a flat head screw driver and carefully pry it up and it will slide towards the top and out hope this helps please dont forget to rate my solution

SOURCE: Toyota Avalon Rear View Mirror

Hi-,
I had the same problem - the inside rear view mirror fell off during a hot summer day. I bought the mirror glue (adhesive) and wondered how to I separate the metal button from the mirror. Enventally, I tried the following and successully separated the metal button from the mirror: There is a little squre slot on the plastic sheath of the metal button. Please find a small flat-ned screw driver whose tip can fit into the sqare hole. put the screw driver into the hole and put it all the way inside down - which will open a little bended metal piece that stops the buttom; at the mean time, slide the metal button towards outside. As the bended metal piece opened uder the pressure of the screw driver, the metal button is freely moveable and can be slide out.
I did this successfully for my Toyota Avalon 1998 car.

Hope it helps.
Wei