Question about Chevrolet Blazer
What would you like to reset? Please elaborate.
If you would like to reset the timimg:
Timing should be fixed/set at the factory. There is not an adjustment for it is what I am saying. You may have crossed the spark plug wires when you put them back on, or you may have a sticking injector in the spider harness.
If you are referring to the engine light:
There is a problem with the emissions controls. Have the problem repaired and they will reset the light.
You cannot reset the Check Engine light on most OBD2 compliant vehicles by removing the battery cable. It must be reset with an OBD2 scan tool.
Take vehicle to auto parts store. Most will do a free test with an OBD reader. The reader will tell you why CE light is on. Could be as simple as a loose gascap. Try that route. Some readers are able to reset computer and turn off CE light, but will only be temp if original problem is not addressed.
If you are referring to other reset, just let me know and I'll try my best to help you out.
Hope these helps and have a great day!
Posted on Jul 26, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 17, 2015 | Cars & Trucks
Dec 30, 2012 | Cars & Trucks
May 19, 2012 | Chevrolet Monte Carlo Cars & Trucks
Except for commercial stripped
chassis vehicles, this switch is
located in the front passenger's
footwell, by the kick panel.
On commercial stripped chassis
vehicles, this switch is located on a
bracket above the brake pedal.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
Aug 23, 2011 | 2008 Ford F 450 Super Duty
Mar 01, 2011 | 2000 GMC Jimmy
Feb 27, 2011 | 1999 Mercury Grand Marquis
Dec 01, 2009 | 1993 Pontiac Grand Prix
Nov 29, 2009 | 1994 Saab 900
Jul 14, 2009 | Cadillac CTS Cars & Trucks
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: