Question about 2001 Pontiac Grand Am SE

1 Answer

Turning signels work wen they wont to

Quick fix is turning on the hazards lights all of the fuses look good.no real problem with any of the other electronics

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Mine did the same thing you just have the replace the relay that is hooked up the the hazard lights. just take of the dash cover and unplug the hazard light relay and take it to a dealer and swap it out, it should only cost around 25 bucks

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals wont work. all other lights including hazard are working. checkall common problems. still no fix


check your fuses. if all works, you may have a faulty turn signal switch. hazard lights ran on a different circuit.

Mar 20, 2016 | Cars & Trucks

1 Answer

1996 thunderbird signal lights and hazard lights not working, works sometimes however doesn't work at all when the headlights are on.


Interior lights check for a blowin fuse, For the signal lights end hazzard lights,Get a new signel light flasher, End try it,, If that dooesn,t work there could be loose wires or a brek in the wires or that there is a short some where in the wireing, That will have to be check out at a auto electric shop,

Nov 27, 2012 | 1996 Ford Thunderbird LX

1 Answer

Inside light went off turn signels , tail light, hazard lights as well


Your Crown Vic has a lighting control module for the functions you listed. Go to the central junction box (CJB) and check 15A fuses 12 and 21, 20A fuse 22, and 25A fuse 27.

Oct 19, 2012 | 2003 Ford Crown Victoria

1 Answer

My turn signels dont work, and its not the fuse.


The most common problem on those was a multifunction switch (turn signal/wiper/hazard flasher)

Feb 14, 2011 | 1999 Ford Explorer

1 Answer

Trun signals intermitently work, checked bulbs wires, fuses, i believe this problem is linked to the hazard lights. Is this posible? where is the hazard relay located?


yes it is linked with the hazard light in a way. when you turn the hazard light on do they seem like they work fine?? if they work good, i would say your need a turn signal flasher, of course the hazards run off of a flasher unit too.. they very from vehicle to vehicle, but most of the time they are under the dash on drivers side... turn your signal on and listen for the clicking, you should find it fairly quickly and easily, that is where your problem most likely is. hope this helps

Dec 07, 2010 | 2002 Jeep Grand Cherokee

2 Answers

My indicators and hazard lights aren't working. I have tried everything and its not a fuse problem.i have tried fixing things towards the battery and i have checked all engine fuses but it just wont work?...


the problem could be the blinker unit has failed,you will find it somewhere under the dash,it may be a square box or a round cylinder with a clear plastic body it will have a connector plug that plugs into it ....hope this helps....cheers

Jul 07, 2010 | 1988 Mazda MX-6

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

My turn signels aren't working. i put a new switch in it plus put a new flash in the fuse is fine to my hazared lights work fine


i found my problem. check behind your radio. there is another flasher there and i exchanged with fuse panel flasher that was really a hazard flasher and switched out. working great now.
enyaw

Jul 31, 2008 | 1990 Ford Mustang

Not finding what you are looking for?
2001 Pontiac Grand Am SE Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...