Question about 1987 Pontiac Fiero

2 Answers

1987 Fiero GT radio stopped working. Power button shows the station when pressed on clock when off, but no sound. If I move the fade or balance knobs with the volume up, I can hear some static...but no radio broadcast. Also, the clock works but time does not progress. It has a cassette, but I need to try that once I find a tape. Any thoughts?

Posted by on

  • schneidr Aug 21, 2009

    I have the same problem on an 87 GT. Radio fuse in the fuse 'box' is good. Where is the fuse in the harness to the radio? Thanks.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Check for the antenna connection.

Posted on Jul 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 6,674 Answers

Double check for fuses in harness to radio & in fuse panel, as there is usually 2 different wires for power. One has constant 12 v+, the other only when key is on, perhaps the one that is powered only when key is on, has blown.

Posted on Jul 26, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007. Why is there no sound output from radio?


Answer is simple: The light works, the clock works, the stations show..but no sound so your radio is defective.
Two options: repair it if worth or replace it.

Sep 28, 2015 | Dodge Caravan Cars & Trucks

1 Answer

Change clock on Pontiac g6


There is 2 different radios. With or without rds. Here are the instructions for both.
Setting the Time for Radios with Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.
To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED displays. If the time is not available from the station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it can take a few minutes for the time to update.
Setting the Time for Radios without Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes flash. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.

Mar 08, 2015 | Pontiac G6 Cars & Trucks

1 Answer

Why do my seek button, power button and the bluetooth not work


Are these on the radio itself or on the steering wheel? If the radio, you may need to pull the radio fuse (Warning! This will delete any and all saved Bluetooth devices, radio station presets, clock, eq settings, bal and fade settings, etc) and then try it again. If the issue is with the steering wheel controls, and you have an aftermarket radio most often you will need an adapter to connect the new radio to the steering wheel as well as a radio that has that capability.

Aug 20, 2014 | Kia Sportage Cars & Trucks

1 Answer

Resseting the Clock, I had to cut the battery cables and rewire them, bu i dont know how to reset the clock


Keep pressing the knob that you use to adjust bass, treble, fade, ect, keep going, you will get to clock. Next one after clock is set the clock. Then you have to be quick about it, turn that same knob to increase or decrease the hour, then it will move to minutes and turn till you get the right minutes.
You really have to be quick about it, it took me several times before I got it completed.
if anybody has the 2.5S model 2010 Altima >>> hold the Clock button for 2 seconds, when the words SEEK and TUNE appear, press the Seek button (top LEFT) up or down to change the Hour ... then press the Tune button (top RIGHT) to change the minutes ... press Clock again to end adjustments.

Jul 13, 2011 | 2000 Nissan Altima

1 Answer

My 2002 chevy malibu's radio seems to be shorting out, the radio will work fine but randomly the sound shuts off the radio still shows the radio station and even says which artist is playing but there...


I'd suggest using the balance and fade controls to cut out each speaker one by one. to possibly determine if you have shorted speaker or speaker wiring. As far as the turn signal clicking noise, the hazard switch is the actual flasher unit for the turn signals, and could be the culprit, but the most likely cause is the turn signal switch itself. It is usually caused by corrosion across the contacts, which can be cleaned out fairly easily, but more typically, the switch is just replaced

Jun 16, 2011 | 2002 Chevrolet Malibu

2 Answers

I own a 1992 GMC Sierra Pickup still with the factory am/fm radio receiver and the seperate cassette player with graphic equalizer. A few years back it started to fail when turning on and now does work at...


I would say the problem is inside the radio itself. I have no idea if anyone repairs these units anymore or if any good used ones are available.

Apr 10, 2011 | 1992 GMC Sierra

1 Answer

I accidently did something the display for the clock/radio ??!!! the display previously show time display & now it shows the radio station name RE: the radio station I listen to is 105.7 (KHCB) and ...


continually press/release the center of the tuning know until you have the preferred display you want and then press and hold the same button until the system beeps (1-2 seconds). It will now save your preferred default screen (clock in your case)

Jan 14, 2011 | 2006 Pontiac G6

1 Answer

I need to set the clock on a CD/cassette radio in a 1999 Ford E 450...also how do I set preset stations too?


Station Pre Set:
You can save 4 pre sets on this radio (1-4) tune the radio to the station you want to save then PUSH and HOLD one of the pre set butons until the sound returns, the station is saved to that pre set. Repeat for the 3 presets.

Clock:
Hour: Push and hold the CLK button and at the same time push the SEEK button to adjust. < decrease hours > increase hours.
Minute: Push and hold the CLK button and at the same time push the TUNE button the adjust. < decrease minutes > increase minutes.

Jul 14, 2010 | 1999 Ford Super Duty F 450

2 Answers

Manual stolen when car was vandalized, need to know how to set clock and radio stations in 1994 Ford Tempo please


setting stations on Fords are easy,put it on the station you want to program and push the channel button in and hold for about 2 seconds then it should flash,now the channel is set..now for the clock,with the key on and radio turned off,press the clock button,then press the seek or scan forward or reverse to adjust the time,then hit the clock button again to make sure it sets.

Oct 22, 2009 | 1994 Ford Tempo

2 Answers

Sound system speakers


wire connection problem. part of the wire might be broken/cut. check the wirings from the radios to the speakers.

Nov 03, 2008 | 2000 Mitsubishi Mirage

Not finding what you are looking for?
Cars & Trucks Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...