Question about 1993 Dodge D150

2 Answers

What is the normal fuel pressure for a 1993 d150 5.2l. I have a problem the pickup runs fine cold except it idles a little high. Once it heats up and I stop the engine it will not start again until it cools down for a couple hours??

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

31-39 psi.

Posted on Jul 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Mine is doing the same thing. Twice so far actually. The problem is that i have good fuel pressure but when she decides to do it i dont have a fuel pressure gauge handy. If its not fuel related when you check it, try the module or the hall effect. thats what im leaning more towards on mine. let me know how things turn out.

Posted on Mar 11, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Chevy C1500 4.3L V6 TBI starts but dies at idle after warming up.


Low pressure from fuel pump, when the pump is cold the pressure increases, as it warms up the pressure drops (this happens in a pump that is going out) the normal pressure should be at 40 with the key on and engine not running, when started the pressure should stay around 36, any less it won't idle and may run as long as you hold the pedal down. The injectors are opened electronicaly, so as long as there is fuel flow the engine gets fuel to run.So check the fuel pump, soundslike you need a new one

Apr 04, 2013 | Chevrolet Cars & Trucks

1 Answer

Oil pressure on my new 2010 Sierra does not exceed 30 psi except when cold.


newer engines require less oil pressure by design and this is within the normal range as long as the idle pressure hot is at least 15 PSI, remember producing high oil pressure requires energy and reduces fuel millage.

Sep 22, 2010 | GMC Sierra 1500 Cars & Trucks

3 Answers

Symptoms of a bad pick up module on a 1996 GMC K2500 Suburban


What I see the most often is a stalled engine with a loss of spark when driving. Once the engine cools off it will sometimes start and run fine for a short while then do the same thing again. Often, but not always, the pickup up coil or ignition module [both are under the distributor cap] have to heat up quite a bit before they will act up. I replace about 10 ignition modules for every one pickup coil but either one can cause the same identical stalling problem. I keep a few known good modules around as test units so I can just replace a suspected bad module and road test it to see if it works. Another thing that can go wrong in these distributors are the magnets built into the pole piece. A weak or cracked magnet can cause all kinds of odd problems such as stalling when placed in reverse, misfires over 1,000 rpm, etc. Worn bushings in the distributor can also cause problems. As far as a specific test you can do to see which part is failing? I wish there was a relaible one. I've tried using a lab scope and module testers to diganose the culprit but you have to catch the problem as it's happening for those tests to be accurate.

Jun 17, 2010 | 1996 GMC Suburban

1 Answer

89 dodge shadow. hard start. normal idle cold, fast idle warm. sometimes it wont start until i hear fuel pump activate.


Hello,
The car may be hard to start because it may need a normal tune-up. If the spark plugs are pretty used, they will slowly stop burning as much fuel because the spark slowly gets lesser and lesser. On a cold day the fuel is harder to ignite with a small amount of spark.
Normal idle when its cold means that your cars idle is probably too high. If you lower the idle, the choke on a cold day will keep the idle a little higher until the motor warms and then it will kick back off. If the idle is too high, it will run very rich, smothering itself with fuel, and causing the idle to stay low. When the car warms, its creating better spark when its warm, and with the idle being too high its running at a fast idle.
The car wont start sometimes can be the cause of a few things. If the ground is bad on the fuel pump, it wont make a good connection sometimes for when you turn the key on, the fuel pump dont pump the fuel to the engine. Another one can be that your accessory switch can be loose going to the fuel pump. I think its your ground though. Good luck! Hope this helps.
Have a nice day. -Steve

Dec 06, 2009 | 1989 Dodge Shadow

1 Answer

Lumpy idle when starting it in the morning, but runs and idles fine once reaches normal engine tempature.


Possible leaking injector(s), leaking head gasket so there is water in a cylinder overnight, or coolant temp sensor reading colder than actual temperature, which would induce a flooded condition. Narrowing down the possibilities can be accomplished by asking these questions: Does the coolant level stay the same, or has it gone down? Is the check engine light ever on? How many miles are on the fuel filter, spark plugs and other regular maintainance items? Fuel is in high demand on a cold start(filter). More fuel easily shorts out a bad spark plug. Too much fuel floods an engine and causes it to run rough or die if it even starts(coolant sensor/leaking injector). Feel free to contact me with more info. Thank You.

Aug 29, 2009 | 1993 Cadillac Eldorado

1 Answer

1991 isuzu pup idle problem


Before you do anything check the coolant level,not just the reservoir but the radiator(check it when the engine is cold!).

Mar 20, 2009 | 1991 Isuzu Pickup

2 Answers

1993 Ford E-350 Fuel issue


Have you hooked a fuel pressure gauge to it?

Mar 15, 2009 | 1996 Ford Club Super

1 Answer

Oil pressure high when engine cold. but fine when engine is warm


It is normal for oil pressure to be higher when the oil is cold. As the oil heats up, it will thin out. Since your oil pump is driven faster with the acceleration of the engine, your pressure will also increase. On a engine up to full temp, your oil pressure will probably be around 20 psi and maybe up to 60 at full load. But on a cold engine, you may see 60 psi at idle. I dont know if your high oil pressure is causing your vehicle to stall, but maybe your running the wrong weight/type of oil for your truck. If you live in a extreme cold area, you may want to look into a block heater to help warm up your engine faster.

Mar 14, 2009 | 2001 Chevrolet S-10

1 Answer

2004 crvautomatic high idle on cold startup 1600rpm takes 3 to 5


Hondas are famous for this, my accord does it. This is normal UNLESS it still idles high after normal running temp. has occured. Watch your temp. gauge when it reaches normal temp tap the gas a little bit if the idle drops then it is fine

Dec 01, 2008 | 2004 Honda CR-V

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...