Question about 1999 BMW 323 Series

1 Answer

Bmw 320i m50, after water leak started to misfire, changed cyl 6 coil as it was'nt working,done compression they are ok, done all the swaping about thing, voltages to no. 6 coil are same as the other 5. just no spark on no.6.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Swap a lead to see if it waps the missfire if it does then its the lead!
If not then the spark plug may be fouled

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bmw po305 code fix


P0305 means misfire on number 5 cylinder, could be bad plug, ignition coil, injector, or wiring, or low compression , carry out a compression test if ok I would try a new coil on number 5 cyl

Feb 23, 2013 | BMW X3 Series Cars & Trucks

1 Answer

2002 saturn vue cylinder 1,3,5 misfiring when swapped coil pack it went away now cyl 2,6 misfiring.


having PO 304 = Misfire cylinder 4,PO 306 = Misfire cylinder 6, as I read above you have done the most. The thing that you have missed is to check whether the Catalytic Converter is faulty or not. To get an idea check whether you have a smell like rotten eggs at the end of the exhaust,you start having problems with cat and needs replacement. My advice before you go for a cat replacement is good to visit an MOT center and check your emissions and then you decide,

Aug 10, 2012 | Kia Rio Cars & Trucks

1 Answer

Misfiring only running on 3 cylinders put new plugs and coil pack on


Is the same cylinder mis firing as before you relpaced coil pack ? If so a compression test is your next option . If there is any water leaks No 4 cyl is a likely suspect and worth checking . The old plugs will give you a clue to condition of cyl's. Injector swap and wiring exam may help also ,but only if you have to . Good luck

Apr 05, 2010 | 1992 BMW 3 Series

2 Answers

How hard is it to change a cambelt on a bmw 320i e30?


You said E30, 320i correct? Your engine is a 2.0L 4 Cylinder engine? If so it does not have a timing belt, it has a chain, upper and lower gears and two chain slides. To change the timing chain and slide set is not easy if you have never done one, neither is the belt on the 6 cylinder engines. I recommend a reputable BMW shop.

Dec 08, 2009 | 1990 BMW 3 Series

3 Answers

99 dodge caravan #4 cylinder misfires, i replaced spark plug wires and spark plugs. Scanner showed #4 still misfiring, could this be the coil?


It could very well be a bad coil pack,or you have low compression in that cylinder.If the compression is good then go with the coil pack,if not you may need a head gasket or an intake manifold gasket.

Nov 07, 2009 | 1999 Dodge Grand Caravan

1 Answer

Changing oil


if its 6 cyl and the engine is m50 engine that will be 6.5 ltr

Dec 24, 2008 | BMW 323 Cars & Trucks

1 Answer

99 buick Lesabre


hey thanks for bringing me up to speed. ive been working on many other problems but with your great explanation i remember.
we need to check the compression on that cyl. and compare it to the compression on 2 other cylinders your choice.
but before you do this get a can of carb cleaner . and with the car idling spray around the intake manifold in the area of #6 cyl. what we are looking for is a small vacuum leak that would also act like this. with the engine idling and spraying around the intake the engines idle sould not change and if it does when you spray you have an intake leaking.
let me know how it turns out.
later
paul

Sep 22, 2008 | 1999 Buick LeSabre

Not finding what you are looking for?
1999 BMW 323 Series Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...