Question about 1991 Mazda 626

1 Answer

Is there a trick to removing the dome light lens?

Dome light doesn't work. I've got a new "festoon" globe but I can't get the lens off. Can you help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 163 Answers

Just pop off the lens with a small screwdriver or snall knife

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2002 Nissan Xterra off-road. How to hook up LED lights with door switches


just connect to the main dome light wiring at the terminals for dome globe insie dome light

Nov 02, 2016 | 2002 Nissan Xterra

1 Answer

How do I replace dome light on Matrix 2009


Remove the key from the ignition. Make sure the doors are closed, so the new bulb does not illuminate when you are installing it.
Make sure the dome lighting switch is turned to the "Off" position. Pry the plastic lens away from the dome light. Use a small, flat-head screwdriver.
Push back the side bulb clamp. Pull out the old dome lightbulb. Wipe the area with a paper towel if it is dirty.
Wrap the new bulb in a paper towel. Insert it into the dome lightbulb holder. Push it up gently to secure it.
Turn the switch to "On" to test the bulb. Reposition the cover and push up to lock the clips into place.

May 28, 2013 | Cars & Trucks

1 Answer

2002 Lancer CE dome light fuse location


The dome light feed comes from the ETACS ECU. There are four fused inputs: 7.5A multipurpose fuse 2, 15A multipurpose fuse 14 and, in the enngine compartment relay box, 10A DEDICATED fuses 17 and 18. One of these four should apply to the dome light

Oct 13, 2012 | 2002 Mitsubishi Lancer

1 Answer

Alarm won't work the roof door do not light on accord 1994


Check the dome light override switch lockated on the dome light itself, then check the fuse for "CTSY Lights" and finally, check the ground attachment by removing the lens cover of the dome (roof) light, an removing the plastic housing of the dome light by either removing a screw, or simply prying on the sides of the plastic housing, you should see a wire screwed into the roof metal.

Aug 29, 2012 | Cars & Trucks

2 Answers

How to replace interior dome light bulb?


1) Remove the key from the ignition. Make sure the doors are closed, so the new bulb does not illuminate when you are installing it.

2) Make sure the dome light switch is turned to the "Off" position. Pry the plastic lens away from the dome light. Use a small, flat-head screwdriver.

3) Push back the side bulb clamp. Pull out the old dome lightbulb. Wipe the area with a paper towel if it is dirty.

4) Wrap the new bulb in a paper towel (oil from your skin will shorten its life). Insert it into the dome lightbulb holder. Push it up gently to secure it.

5) Turn the switch to "On" to test the bulb. Reposition the cover and push up to lock the clips into place.

If the bulb doesn't work, you've got a bad switch somewhere, probably on the drivers door.

Dec 26, 2010 | 2006 Toyota Highlander

1 Answer

How to fix the dome light in a 1995 toyota corolla


Opaque lens should "pop" and access to festoon bulb (usually 10w) . If other functions are down ie; time clock, radio ,, it might be a blown fuse. The bulb is a specific lenght and should be replaced with equivelant. . Good luck

Apr 15, 2010 | 1995 Toyota Corolla

1 Answer

How do i replace the dome light in my 97 corolla


The dome light is mounted on the ceiling of the car.
You would need a small flat-end screw-driver, and aim it to the base of the lens cover. Then pry the lens off.
If you cannot remove the bulb with your finger nail, then pry it out at its end. Or simply push back the bulb's contacting spring at the end of the bulb. Then steady your hand to catch it as it drops down.
Replace the lens by pushing it back to its housing.
Test the dome-light if it works. If it doesn't check the dome's door switches screwed to each door frame. Pushing on the door switches several times sometimes refreshes the dome-light. The door-switches can be removed with a medium-size 4-corner screw-driver.
By removing the black covers of the door-switches, their conditions could be detemined. Spray some electrical contact-cleaner on them if corroded, or simply replace with new ones.

Dec 14, 2009 | 1995 Toyota Corolla

1 Answer

The interior dome light is burned out, removing cover problem.


You will have to pry off the lens CAREFULLY using a small screwdriver. There are two little plastic protrusions on each long side of the lens which fit into the casement. You can ease the casement away from the lens enough to get it to pop out. Re-inserting it is the same, but probably easier.
Gently, give it a try.
Hope this helps you.

Oct 23, 2009 | 1994 Honda Accord

1 Answer

Replace center dome light bulb 2007 Mitsubishi


Hi, the lens of the dome light should clip off. If you look at the lens you should be able to see the reinforcing of the plastic where the clips are molded on to keep it in place. Once you have removed the lens the globe should come out easily. Just make sure that the corners of the new globe goes into the holes of the electrical connection points. They do not have to push through, but the globe should be secure between the connection points.

Sep 29, 2009 | 2004 Mitsubishi Outlander

Not finding what you are looking for?
1991 Mazda 626 Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...