Question about 1989 Nissan Maxima

1 Answer

Have broken studs on the front passenger side and need to know how to replace.

Posted by on

  • kutsplus Jul 26, 2009

    broken studs on the tire. cant get the hub off, do I need to remove the axle?

  • richtko94 May 11, 2010

    Broken studs to what ? The tire, the exhuast ?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 146 Answers

I assume that you are referring to the wheel studs and if so you will have to remove the wheel, the brake caliper, the brake caliper stand and the brake rotor. Drive the old stud out with a hammer. Make sure you purchase new lug nuts with the studs. If they are the acorn style, buy one that is not to help with installation. Slide the new stud in the hole from the rear of the flange, install some washers for clearance of the stud shoulder. Install the non acorn style lug nut on the stud backwards. Using a impact gun, pull the stud through. Remove the backwards lug nut and washers.

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Broken wheel studs on a 1987 jeep wrangler


No need to replace the hub just the studs. The come in from the back and are splined to prevent the stud from turning with the nut. Remove the hub --drive out the broken studs and put the new ones in from the rear and drive them back in. Get the studs from the dealer spares or a good tyre retailer.

Apr 08, 2013 | 1987 Jeep Wrangler

1 Answer

How to replace broken stud of honda crv 2001 front wheel


remove wheel, brake assembly & rotor. rotate to where the broken stud is in the opening where the brake assembly was. drive the broken stud out of the hub flange. then install the new stud by stacking washers on the new stud and tighten the lug till it pulls the new studs flange tight against the back side of the hub. remove lug and washers , reassemble .

May 25, 2011 | Honda CR-V Cars & Trucks

1 Answer

How to remove hub stud so studs can be replaced on an 1994 acura integraon the passenger front


spray WD40 on broken or striped wheel stud. rotate hub to position where stud will come out the back once it is knocked out with a ball peen hammer or sledge hammer

Mar 21, 2010 | 1994 Acura Integra

1 Answer

Have broken lug bolts front passenger side, can I replace them myself?


yes but it is a huge pain in the *** you have to remove the wheel the brake caliper and the brake disk and remember it isn't lego it is all bolted on and screwed together and if you mess it up it wont be just your life that comes to a sudden stop you may kill somone else so if you havent do it b4 then stop

if you have done a front brake job and survived than di it again once the rotor removed there is the flange plate and the broken studs get the hammer out wack each broken bolt to remove it place the new stud in the hole and get the tire iron out tighten it up pull it right through you might need a spacer like a 6 pack of washers to pull the bolt all the way through
reinstall the brakes and happy driving remember after the first 50 km get out the tire iron and re check the studs are all tight as it will likely settle after a bit of brake heat

Jan 28, 2010 | 1995 Nissan Maxima

2 Answers

Two left side front wheel studs nuts broken.


They are replaceable.
You can knock the broken studs out with a point chisel (wear safety glasses). Take the pieces and nut to an auto parts store in order to get the same nut size (don't want to use two tire tools/wrenches).

Sep 25, 2009 | 1996 Nissan Quest

1 Answer

Broken lug nut stud on 98 civic dx coupe


knock it out... use an old nut that will fit the new stud and install the stud. the nut will pull the stud in tight to the flange.

Jul 19, 2009 | 1998 Honda Civic

2 Answers

Wheel studs


Nuts still on or broken off?

Jun 21, 2009 | 1996 Buick Regal Olympic Gold

2 Answers

Broken wheel studs on 1996 grand am se- passenger front


usually they are an assembly but when i get crazy and damage studs i raise and support both front wheels so i can turn them and slowly move the hub where you can fit teh stud in and use an open lugnut to tighten down it will pull the stud in (i use an air compressor for this)

Apr 28, 2009 | 1996 Pontiac Grand Am

1 Answer

Broke stud on front left side


Yes you can replace the broken wheel stud. The wheel studs are pressed into place, and a vise will work to press it out, and in. You will have to remove the wheel hub, and then use a deep well socket and a bolt or something smaller than the actual stud to remove it with a vise. To replace it, you will need to use the deep well socket on the thread side of the stud, and press the new one in with the vise.

I hope this helps you, and I wish you luck with your repair.

Apr 25, 2009 | 2003 Pontiac Sunfire

1 Answer

Broken off wheel stud on a 1998 hyundai elantra


CLICK HERE FOR VIDEO

Thanks for using FixYa - a FixYa rating is appreciated!!

Feb 20, 2009 | 1998 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...