Question about 2000 Ford Focus

4 Answers

Brake light, Turn signal not working rear right 06' Focus

I've replaced both the fuses and the light bulbs on my 2006 Ford Focus. The front right signal blinks very rapidly. The rear right turn signal doesn't work at all. Neither does the rear right brake light. The running lights in the back still work just fine at night and during the day, but no brake light or turn signal on rear right tail light. I can't figure out what the problem is. The ones on the left work just fine (brake light and turn signal on left). Please help.

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems

Posted on Aug 06, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 855 Answers

Did you check the front bulb the filaments could be touching causing the problem. Or you may have a wiring problem. If wiring seems to be the problem first check your hot wire and ground wire at rear bulb that will tell you where to go next.

Posted on Jul 26, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

It's probably the GEM (Generic Electronic Module) taht controls the turn signals and a bunch of other stuff. It's behind th glove box. If you rpelace it, it needs to be programmed by downlodaing the info from the old module and reinstalling it in the new module. You need a scan tool (delaer) to do this.
About a $200-$250 repair.

Posted on Feb 17, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,187 Answers

Check out the wirings if there are no corrosion or disconnection. The wiring of these lights are located under the steering column and pass under the dash. The chances of them having the same issue is great since they are bundled together.

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

All signals and other flashers work but passenger front flashers do not work


Use a test light, test for power and ground at the bulb contacts. Then test for power and ground at the wires. Probably needs a new socket, common problem.

Oct 27, 2015 | 1995 Ford Taurus

2 Answers

I have no break lights or turn signals


Turn signal tail lights and BRAKE LIGHTS NOT WORKING


It can be faulty brake light switch causing the problem or its blown brake light bulb. First check and confirm brake light lamp is working and that's not the case.

For turn signal not working it can be faulty turn signal switch or its issue with wiring:----


==========

To trouble shoot brake and turn signal related problem, check the help links mentioned below:-----


Click the link:----
1996 Buick Regal Grand Sport Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------
No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------
Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------
How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------
How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------
Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------
1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------


2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html

---------
Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html

----------
Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

----------
Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------
Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------
How to replace rear Brake lights on 2004 Toyota RAV4? http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------
One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------
2002 Lincoln Town car Fuse Box http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html 2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------
Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------
2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------

These will help.

Thanks.

Nov 24, 2012 | Cars & Trucks

1 Answer

2006 Ford Focus. Left front signal blinks fast, no left rear signal. Mechanic said, "there's a circuit board in the back that may need replaced?" I replaced the bulb, to no avail. Fuses are fine, I'm...


Hi!!
When your turn signal indicator flashes faster than normal on either side, is telling you that you have a blown or defective bulb that needs to be replaced on that particular side.
Just replace your left rear signal light bulb. Good Day!
Don't forget to rate this Post!!!

Sep 22, 2010 | 2000 Ford Focus

1 Answer

The drivers side rear brake light/turn signal only not working


you replaced the bulb with the wrong one i.e. a two filament bulb with a one filament bulb

Oct 05, 2009 | 2006 Ford F-250 Super Duty

3 Answers

Rear blinkers and brake lights on 2001 ford focus not working


yes it sounds like the turn signal switch is defective, the brake lights go through that switch as well.

Sep 06, 2009 | 2000 Ford Focus

2 Answers

2001 ford focus brakelights not working


check the fuses, and bulbs first, if not that, i might be the switch

Jul 14, 2009 | 2001 Ford Focus

1 Answer

2003 ford expedition tail turn signal light dont work bulbs are ok


You say the rear tail turn signals are not working are the fronts working? If the fronts work and the rears don't then you have a wire issue. Check the grounds for the tail lights or check and see if a trailer wire harness was put in by splicing the wires. Also check for brake lights and see if they work should be same bulb. If the fronts do not work either check fuse 18 in the fuse box should be a 10 amp or check brake fuse 2 which is a 20 amp

Jul 06, 2009 | 2006 Ford Expedition

1 Answer

2006 ford escape brake lights don't work. the


Replace the brake switch located on the brake pedal shaft.

Jun 08, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

3,065 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...