Question about 1993 Subaru Legacy

1 Answer

The check engine light keeps coming on and flashing and then goes off on my 93 subaru legacy ive changed the oil sparkplugs air filter everything and it still comes on and also my seat belt light flashes too even when all seat belts on on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 744 Answers

Hi..

well first of all it means that u have a problem some where on the suv the only way to find the problem is to hook a diagnostic computer and see what the code is u will have to take the car to a shop who works on isuzu and im sure they can tell u what code it is and whats wrong or u can take the suv to advance auto parts and they can hook there machine to it for free and tell u the code good luck

OK, the best action now would be to scan the ecu for any trouble codes that may be stored at this point with a diagnostic computer. this action will describe the issue concerning the check engine light and, it will also direct you to the location of the failed sensor that may be damaged at this time.

In most cases, this light will illuminate if a vital sensor has failed to register a signal for a short time or, if the sensor circuit is open.

thank u
rate me!!

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After changing oil on 1997 Subaru Legacy I started the car and it ran about 5 seconds and shut off and AT oil temp light and check engine light came on. This is my first Subaru and this is the 4th oil...


will it restart ? can you check the computer for trouble codes ?
The check engine light would come on just as the engine dies under normal conditions.

Aug 19, 2012 | 1997 Subaru Legacy

1 Answer

Engine light stays on changed plugs and wires did oil and filter did air cleaner and gas filter


You need to have the computer scanned to see why the check engine light is on. Once you have the trouble code(s) you can than start researching ways to resolve them.

The check engine light comes on because it sees a fault with either a computer controlled device, and input sensor, or a monitored system. It has nothing to do with the oil or filters.

Sep 26, 2010 | 1991 Subaru Legacy

1 Answer

Weak throttle response 92 subaru legacy


I would have have the TPS (Throttle Position Switch) tested, it sends a signal to the ECM of where the position of the throttle is so the ECM can determine how much fuel and air and spark to give to the engine. Have you replaced the spark plugs, fuel filter, air filter, spark plug wires? Have the coil tested also to see if it is putting out enough spark. Do you have any Check Engine Light coming on?

Jun 03, 2010 | 1992 Subaru Legacy

1 Answer

My 1991 legacy subaru runs bad at times. the chk


really not shure about that but try looking just in back of the air intake i think its on the line!
i might mistaking whit a other model! if so ...sorry

Oct 20, 2009 | 2006 Subaru Legacy

1 Answer

93 Subaru legacy 2.2 turbo 5 speed manual tries to quit, jerks, acts like its not getting enough air, running rich,check engine light has been on since Ive had it.Hesitation. unplugged oxygen censor and it...


Sounds like the timing is lost, go get your engine timed, change plugs and check the continuity on the spark plug cables, also have it scanned for errors on the sensors, that should lead you straigh to the real issue, hope this helps ;-)

May 28, 2009 | 1993 Subaru Legacy

1 Answer

93 Subaru legacy 2.2 turbo 5 speed manual tries to quit, jerks, acts like its not getting enough air, running rich,check engine light has been on since Ive had it.Hesitation. unplugged oxygen censor and it...


ok , unplugged ox sensor cause engine light is on , then check the air filter and fuel filter for dirty and replace,connect the ox sensor, then disconnect the negative battery terminal few minutes, reconnect and test

Apr 16, 2009 | 1993 Subaru Legacy

2 Answers

A/t light is flashing 16 times n 1995 subaru legacy


if by a/t you mean automatic transmission try a power purge transmission service it may have a filter sensor that is telling you to service soon

Feb 14, 2009 | 1995 Subaru Legacy

Not finding what you are looking for?
1993 Subaru Legacy Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...