At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First check fuse panel see if you've got a bad fuse. If all fuses good then locate your washer resovoir and at the bottom of it is a black pump motor, sometimes unboltingaA the whole tank and lifting out is way easier but careful of the blk tubing that wiper fluid travels in . Unplug the boot ( where the electrical wires attach to the pump are) and put test light in it and have someone activate it from inside the cab. If it lights up .. Getting power... Then just buy a new pump and install, FYI it's just pushed into a rubber housing but be warned, pop it out and out comes the rest if your fluid in your lap. If test light is dead when button is activated make sure you test the other wire too. FYI, one is ground other is power , the problem is more than likely in your switch at the column. Or if ever in a accident always investigate the prior damage areas before moving on to column. Working on the column is never fun. Good luck
Is your wiper fluid level good?Look for leaks at pump,it's connected to container,also check your hoses leaving pump to windshield,could be loose or binding.
First at the wiper reservoir put your head down close to it with the igniction switch to on have some one press the wiper spreyer, You should here a soft winning noise..(the motor is located in the washer res.) if no noise check your fuse box. 2ed you can take a niddle and gentley put into the hols where the water come out and gently spin the niddle with your fingers this shold get rid of any debree caught in the head......good luck....
the wiper motor is on the front of the car you need to take the wiper arms off undo do the spreyers and undo the plastic clips on the shield (under the arms you took off is the plastic shield i speak of) you need to remove after all that is off the wiper motor is there :)
should just push in to the bottom of the washer tank, if this one is located inside the front fender, you'll need to remove the plastic inner fender-well to access
×