Question about 2002 Mitsubishi Lancer

1 Answer

My wira 1.8 4g93 single cam, my meter speed why no match the car speed ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 583 Answers

Possibly wrong size tyres ----or the speedo gear on cable outlet wrong one. failing that you can get the speedo recalerbrated at any automotive instrument service ----but my guess is you gotta bigga tyres

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing marks for Isuzu kb200


CAM. use the full words, CAM timing. for a win.
my guess, new cam belt , installation.
posted 100s of times here, and we don't have KB in USA>
not one. nor is this engine in Europe, (ouch)
why no post your country so others can match up books.
and the words inside. matching what you have.
or go ISUZU in your town, and buy the book.
1998cc engine. (HEC-2.0 is official name of it)
wiki:
This HEC 2.0 single overhead camshaft engine with multi point fuel injection is a revised version of the 2.0 litre engine
a google search finds little, but google is mostly USA things.
There is a wiki on this car and says, its only sold in South Africa.
and shows. this.
This HEC 2.0 single overhead camshaft engine with multi point fuel injection is a revised version of the 2.0 litre engine

Sep 11, 2016 | Isuzu Cars & Trucks

1 Answer

Locate speedometer cable


The speed meter cable arises from rear middle side of the transmission and is attached to the rear of combination meter assembly. It is a two part system. One is the inner speed meter wire and the outer cable or sleeve, in which the inner speed meter wire rotates to show the vehicle speed. The speed meter cable is in some Toyota models is made up or two cables, a smaller cable near the transmission side and larger one towards the meter, which are joined together to form a single piece First look up the inner wire of smaller piece and then pull out the other larger inner wire, without removing the whole cable. If it is found broken, replace the whole assembly.
To replace the speed meter cable assembly, unscrew the cable at the transmission side. Sit on a driver's seat, open the Philips screws from under side of the combination meter. Pull out the whole cover by tilting it to release from the steering wheel. Unscrew the 4 Philips screws, pull out the meter assembly a bit, bend your claw to approach behind the meter assembly, push the speed meter plastic lock force fully towards the cable and pull out the cable.
Ask your companion to slowly pull out the cable from the engine compartment side and you also push the cable towards the same direction simultaneously to take it out.
Install the new cable in the reversed order of dis assembly.
Hope that works. Thank you.

Jun 19, 2014 | 1991 Toyota Corolla

2 Answers

Proton Wira 1.5Auto Why rough vibration when accelerating?


if your car got power but vibrates when accelerating...means the drive shaft joints near the gearbox is wearing out..or just check the whole drive shaft...if the flexible rubber seals is broken means you got dirt inside your CV joint...dont ignore this! sevrvice and replace the rubber as soon as possible!! if your drive shaft got loose...replace it..

May 07, 2011 | 2002 Mitsubishi Lancer

1 Answer

How do i set timing on 2000 dodge intrepid, i had to put water pump on now i need the timing set,


i number 1piston which is the front one on the passenger side has to be all the way up and then 60 degrees past that, there is a mark on the crank that matches up with an arrow on the oil pump housing, the driver side cam sprocket has an arrow on it, and the passenger side cam sprocket has a hole in it which is its timing mark, on the chain there are 4 gold link, a single gold link goes on the crank timing mark, a single gold link goes on the passenger cam sprocket timing mark, and the double gold links match up with the driver side cam sprocket timing mark

Aug 14, 2010 | 2000 Dodge Intrepid

1 Answer

To set up timming with twin over head cams proton wira


MY ADVICE IS TO INVEST IN A MANUAL AND FOLLOW THE STEPS CLOSELY. IF YOU MISS A COUPLE OF TEETH YOU CAN BEND THE VALVES

Sep 27, 2009 | Nissan 300ZX Cars & Trucks

1 Answer

Engine swapping


IF Its the SAME Year You Need his ECM & Posiblt Engine Harness ,as there ARE Differances in Many Sensors & Actuators Plugs Wont Match

Feb 03, 2009 | 2004 Ford Focus

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

Related Topics:

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...