Question about Dodge Pickup

1 Answer

Reset change oil light on dadge 1500. comes on when engine is started and stays on several minutes

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Turn key ON but do not start. Press the gas pedal to the floor three times. Turn key OFF. Thats it. You should be good to Go. If it didn't work...try it again.

Posted on Jul 26, 2009

  • e_jr0214 Oct 07, 2010

    Thank you for your solution, as i change my own oil on my 1998 dodge dakota. you have my thumbs up.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

7 Answers

How do I rest oil change light on a 2001 1500 silveradeo?


Place a piece of black electrical tape over it ,problem solved .you know the oil is good

Oct 10, 2014 | 2001 Chevrolet Silverado 1500

1 Answer

How to reset the change oil light on 2001 chevrolet suburban LS


Turn the ignition key to on position, but do not start the vehicle.
Wait for the "change oil light" to come on
Tap the throttle pedal three times quickly
Wait for the light to flash several times, then go out.
Start the car and drive and it won't come back on.

It usually works the first time, but repeat if light stays on.

Jul 28, 2012 | 2001 Chevrolet Suburban

3 Answers

Reset oil change milage


GM OIL LIFE SYSTEM - RESETTING
The engine oil life monitor will indicate when to change the engine oil - usually between 5 000 km (3,000 miles) and 16 000 km (10,000 miles) since the last oil change. Under severe conditions, the "CHANGE OIL SOON" light may be displayed before 5 000 km (3,000 miles). The vehicle must not be driven more than 16 000 km (10,000 miles) or 12 months without an oil change.

Reset the oil life monitor when the oil has been changed, use the following procedure:
  1. Turn the ignition key to the RUN position.
  2. Fully push and release the accelerator pedal 3 times within 5 seconds.
  3. If the Change Oil Soon light flashes, the system is resetting.
  4. Start the vehicle.
  5. The oil life will change to 100%.
  6. If the Change Oil Soon light comes back on, the system has not reset. Repeat the procedure.

Mar 06, 2011 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

How to turn off change oil light on the 2004 Chevy Colorado Pick-up truck ?


1. Turn the ignition to ON do not start.Engine OFF dash board lights ON.
2. Press and release the reset button in the driver information center (DIC) until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear on the DIC display, press and hold the reset stem until several beeps sound. This confirms the OIL LIFE system has been reset.
4. Turn the key to lock. If the CHANGE OIL message comes back on when you start the engine, the ENGINE OIL LIFE system has not reset. Repeat the procedure
Alternate Method
1. Turn the ignition key to ON with the engine off.
2. Fully press and release the accelerator pedal 3 times within 5 seconds. Several beeps sound. This confirms the oil life system has been reset.
3. Turn the ignition key OFF.
4. If the CHANGE/OIL message comes back on when you start the engine, the engine oil life system has not reset. Repeat the procedure
I use the second method, it is more universal and it works for Chevy Venture too.

Nov 06, 2010 | 2003 GMC Sierra

1 Answer

How do i reset the oil light on my 95 fleetwood cad


1993 BROUGHAM & 1993-96 FLEETWOOD
Oil Life Indicator
1. Oil life indicator will display CHANGE OIL when oil change is needed, based upon engine oil temperatures and driving patterns. After changing oil, reset
oil life indicator.
2. To reset, turn ignition switch to ON position. Do not start engine. Fully press and release accelerator pedal 3 times within 5 seconds. If CHANGE OIL light
comes on and stays on for 5 seconds, it did not reset. Reset system again.

Jun 08, 2010 | 1995 Cadillac Fleetwood

2 Answers

Where is oil light reset button? Light stays on regardless of condition of oil.


  1. Turn the ignition to "ON", with the engine off.
  2. Slowly fully press and release the accelerator pedal 3 times within 5 seconds. The reset is complete when the chimes sound and the "CHANGE OIL" lamp goes out. If the lamp stays on and no chime is heard, repeat the reset procedure.
  3. Turn the key to "OFF".
  4. If the "CHANGE OIL" lamp comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

May 28, 2010 | 2004 Oldsmobile Alero

4 Answers

What does "service" light mean?


The service light comes on every 5000 miles to remind you to change the oil & check fluids. It is reset with a special tool that connects to the OBDII connector.

Jan 18, 2010 | 1998 Volvo S90

1 Answer

How do i reset the change oil light on a 2001 chevy 1500 5.3 en


Turn ignition key to on, but not start. Quickly step on accelerator pedal three times. The light and reminder will go away.

Jan 10, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

98 olds intriqe 3.8 chang oil lite on when car first started then goes off after a few minutes


Your "Oil Life Monitor" needs to be reset.
Turn ignition on, engine OFF.
Fully depress and release the accelerator pedal slowly 3 times within 5 seconds.
If CHANGE OIL indicator flashes, the system is resetting.
After indicator stops flashing, turn key off, then start vehicle. If light stays off, you are done. If it comes back on, repeat the entire procedure.
**Note** Oil life monitor should be reset, whenever you change your oil and filter.

Oct 02, 2009 | 1998 Oldsmobile Intrigue

1 Answer

Nedd to know how to reset change engine oil light


Try this....

To reset the light, turn the key to the Run position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the Change Oil Soon light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset. If it does not work using the accelerator pedal, go under the hood and move the linkage manually to reset the system

Feb 18, 2009 | 2001 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...