Question about 2004 Chevrolet Impala

2 Answers

On a 2004 Impala what is that pipe/hose called that is at the top of the PCV valve? the rubber piece on mine has cracked.(that goes on the top of the PCV )

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

I beleive it's simply called the PCV hose. If you go to the auto parts store, the hose may come pre-formed or they will be able to supply you with the correct diameter hose. I would take the old hose with you for a match up.

Posted on Jul 26, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 3,433 Answers

Pcv vacuum hose ?

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Ford Explorer 5.0 V-8 PCV valve replacement


I haven't done this in a long time, so I'm not sure of the size PVC pipe you will need, but I think it is 3/4". Get a piece of 3/4" PVC pipe about 12 to 18 inches long. Length isn't very important, as long as it is over about 12". Cut a slot in the side of one end about 2 inches long and the width of the rubber boot that turns 90 degrees off the top of the PCV valve. Slide that pipe onto the valve with the hose sticking out of the slot, then rock it around until it slides out of the grommet. You can twist it a bit, but don't damage the rubber boot unless you have a replacement. If you need a bit more upward force, bend a coat hanger into a hook and use it to hook under the boot sticking out the side of the slot, You can grip the end of the hangar wire and the pipe at the same time as you rock and twist until the valve comes out. If you need to use the pipe to reinstall the new valve, you will need to make a 90 degree bend in the coat hangar wire and put it inside the slot in the pipe, to keep the top of the rubber boot from sliding up into the pipe when you put pressure on the valve to seat it into the mounting hole.

May 22, 2014 | 1999 Ford Explorer

1 Answer

Where is the pcv valve for my 1995 chevy impala


Watching the picture of the car.I think that the engine is a V8,don`t remember which side of the engine but in the top of the valve covers you are going to see a hose that comes from the carburator or TBI,at the end of that hose goes the PCV valve and inserts in to the valve cover.

Oct 25, 2010 | 1995 Chevrolet Impala

1 Answer

Where is pcv valve located on 2005 taurus?


From the front of the car and starting at the throttle body, locate a large rubber hose coming out of the bottom of the throttle body, this hose comes straight down, then bends towards the front of the car. A plastic pipe connects to this rubber hose and the plastic pipe continues forward, then bends to the passenger side and dives under the wiring harness a few inches and connects to a 2" long rubber hose which is then connected to the PCV. The PCV is made by motorcraft; part # ev-243 or ev-268. Ev268 has a metal hose wraped around it; This is used for coolent on other models (not yours). Bend it slightly and pull it off. The valve has square sides. Use long nose pliers to reach under the wiring harness and turn 1/4 turn counterclockwise to remove and opposite to install.

I think Ford floated the PCV in space and then built the entire car around it. This is, perhaps, the worst PCV location I have encountered.

FixYaWIZ.....saailer@att.net

Dec 08, 2009 | 2004 Ford Taurus

3 Answers

2004 ford f150 Heritage.I cannot find the PCV valve location?


The PCV valve is located on the passenger side valve cover towards rear of engine.

Sep 05, 2009 | 2004 Ford F150

1 Answer

Oil coming from the area where rubber hose goes


pcv cracked? The spark plugs are installed into the top of the head.
Replace cracked or dry rotted hose or the gromit for the crank case pressure valve, this should return through a line to the intake. Good luck

Aug 29, 2009 | 2003 Chrysler PT Cruiser

5 Answers

How do I remove the pcv valve from a 3.8 liter engine in a 2005 dodge grand caravan? I cannot pull it out.


1. BUY THE NEW PCV VALVE FROM THE DEALER. part #4648973AC (I paid $9.95 in the Detroit area). 2. PCV valve is located on top of 'rear' valve cover. There is a black rubber pipe connecting the PCV to the upper intake manifold. The rubber pipe is like an inverted 'U' shape. 3. To remove the rubber pipe, you will need to squeeze the band clamps. Remove the upper end first. You will then be able to rotate the lower end clockwise, if necessary, to get enough clearance to use pliers to squeeze the band clamp. Remove the pipe. 4. You should be able to see the small chrome pipe on the end of the PCV valve. However, the PCV valve is completely surrounded by a plastic collar/shroud, part of the plastic valve cover. So, the only part of the PCV that is accessible is the small chrome pipe. 5. THIS IS WHY YOU NEED TO BY THE NEW PART FIRST. I needed to clamp onto the end of the PCV pipe with VISE-GRIPS. This will crush the end of the pipe. You will hold the vise grips in a horizontal fashion, towards your right, in your right hand. 6. Rocking the pipe, while carefully levering the vise grips on top of the plastic collar, you will walk the PCV valve up, and out. BE PATIENT. You do not want to crack the valve cover! 7. The rubber grommet should come out with the PCV metal valve. If not, you will need to pull it out (needle nose pliers?). 8. Install the new PCV valve. I used a film of white lithium spray to help the insertion. Note, there is a groove molded into the rubber grommet that must snap into place. I used a 5/8" deepwell socket as a 'pusher', to ease the PCV valve into place (just push, do not hammer). You should be able to feel it positively snap into place inside the plastic collar, otherwise it is not properly installed and will not seal. If properly installed, you will not be able to pull it out by hand. 9. Install the PCV rubber pipe. Slide the clamps towards the middle of the pipe, fit the pipe over PCVvalve. Be sure it is seated all the way to the bottom of the plastic collar. Squeeze the clamp and work down to the bottom of the pipe, then release. Repeat for the upper end of the pipe and spring clamp. 10. Have a cold one. You earned it.

Jun 27, 2009 | 2005 Dodge Grand Caravan

3 Answers

Where is the pcv valve located on a 2003 ford ranger


  • The PCV valve can be located in several places. The most common location is in a rubber grommet in the valve cover. It can be installed in the middle of the hose connections, as well as installed directly in the intake manifold.
  • Once the PCV valve is located, make sure all the PCV system hoses are properly connected and that they have no breaks or cracks.
  • Remove the air cleaner and inspect the air and crankcase filters. Crankcase blowby can clog these with oil. Clean or replace such filters.
  • Oil in the air cleaner assembly indicates that the PCV valve or hoses are plugged.
  • Make sure you check these and replace the valve and clean the hoses and air cleaner assembly.
  • When the PCV valve and hose are in satisfactory condition and there is oil in the air cleaner assembly, perform a cylinder compression test to check for worn cylinders and piston rings.
  • Feb 27, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    WHat is pipe called leading to engine


    not sure i have the right hose but it appears you are after a pcv hose

    Feb 27, 2009 | 2000 Daewoo Lanos

    1 Answer

    How do you remove a pcv valve on a 2001 ford escape v6 3.0


    The PCV valve is at the end of a plastic or rubber hose which goes into the valve cover,, just pull it off the hose and replace with a new one.

    Jan 19, 2009 | 2004 Ford Escape

    1 Answer

    Pcv


    Under the wiring harness, which is under the fuel rail, which is under the upper intake manifold.
    From the front of the car and starting at the throttle body, locate a large rubber hose coming out the bottom of the throttle body, this hose comes straight down, then bends towards the front of the car. A plastic pipe connects to this rubber hose and the plastic pipe continues forward, then bends to the passenger side and dives under the wiring harness a few inches and connects to a 2" long rubber hose which is then connected to the PCV.
    You can see it actually. Locate the big coolant hose that is just above where the plastic pipe dives under the wiring harness, if you shine a light over the top of this hose and at a fairlt steep angle allowing you to see under the harness, you can make out the PCV. 

    Oct 30, 2008 | 2004 Ford Taurus

    Not finding what you are looking for?
    2004 Chevrolet Impala Logo

    Related Topics:

    313 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76691 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8531 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...