Question about 1997 BMW 328

1 Answer

Alarm reset is there a reset swich for alarm and door lack and where is located

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

There is not a reset switch. unfortunatly you have to take it to a dealer to reset the code. They have to connect it to the computer and download a new code and sync it with your remote.

Posted on Aug 03, 2009

  • 1 more comment 
  • CHATO358 Aug 03, 2009

    there is not a reset switch. unfortunatly you have to take it to a dealer to reset the code. They have to connect it to the computer and download a new code and sync it with your remote.

  • CHATO358 Aug 03, 2009

    there is not a reset switch. unfortunatly you have to take it to a dealer to reset the code. They have to connect it to the computer and download a new code and sync it with your remote.

  • CHATO358 Aug 03, 2009

    there is not a reset switch. unfortunatly you have to take it to a dealer to reset the code. They have to connect it to the computer and download a new code and sync it with your remote.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont have key to open door so alarm will not go off and the motor will not turn over


have you tried the door locks, enter the car and lock and unlock doors, the alarm is actived with remote or key when door lock is locked, how do you enter the car?

Oct 30, 2012 | 1999 Volkswagen Jetta

1 Answer

My vw sharan locks itself after 30 seconds even though the doors are open- unless its the drivers door. it looks like it doesn't recogise that the doors have opened.


Right , here's your problem ,,, the door swiches are incorperated into the door locks and thats why your interior light does not come on, therefore the vehicle thinks the doors haven't opened, This will cause the alarm to recycle the door locking signal .

Apr 05, 2010 | 2003 Volkswagen Jetta TDI

1 Answer

Car won't start after setting off alarm


locate the alarm module below the hood.

there us a switch comming off it..


press it 3 times, turn on ignition,, press switch 3 times,, press door lock switch (on side of door senesor) 3 times..

Reset..


Check your main engine fuse..

Mar 17, 2010 | Lexus ES 300 Cars & Trucks

1 Answer

Why does my alarm go off when its just sitting in the driveway and nothing around it?


factory alarm? my personal truck has the same issue but in my case when i set the alarm after a while it will go off. what i found on mine is my door sags because the bushing in the hinges are worn and with it sagging the swich in the door that controls the door ajar light is not setting where it should so sometimes it would send a signal that the door is open which sets off the alarm idk this may be the same with yours.

Oct 22, 2009 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

Alarm going off every 3 or 4 hours and the inside lights will stay on inless the dome overide switch is pressed


If you have a 4 door jimmy the rear door jamb swiches go bad. also check and clean the pin terminals at the jamb swich dconnector. This is a 2 pin terminal connector.

Jul 01, 2009 | 2000 GMC Jimmy

1 Answer

2002 Jetta red door ajar light stays on-car alarm won't activate


you have to find wich door is first becouse they all have kill swich in every door so u have to disconect one by one n by pass to see wich one turn the light off then u will have to replace it auto parts store shuold have these at hand, lol becouse as long the light stay on the alarm will not work,

May 02, 2009 | 2001 Volkswagen Jetta TDI

1 Answer

Unable to unlacht divers door


try to remove the door panel,might be the micro switch for alarm is stock,or some linkage maybe disconnected to the swich.

Feb 15, 2009 | 1992 Mercedes-Benz 190

1 Answer

Reset factory alarm 1999 Chevy Venture


passager side lock and unlock the door try it out pierre

Oct 04, 2008 | 1999 Chevrolet Venture

Not finding what you are looking for?
1997 BMW 328 Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...