Question about 2001 Toyota Camry

1 Answer

Instrument cluster does not work.

My 2001 toyota camry instrument cluster, including coolant temperature, odometer, fuel quantity,speedo. etc.is inoperative , does anyone know if there is a relay, a fuse or circuit breaker and the location. or what the possible cause might be. Thanks

Posted by on

  • Anonymous Mar 17, 2014

    information center not working

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 50 Answers

Check the relays under the kick panel on drivers side...maybe switch them around and see if that works....sometimes corrolas will do the same thing.check the ones under the hood also.

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

If I change the instrument cluster in my 2002 Toyota Camry will the mileage change?


If you are referring to the odometer reading, the answer is yes.

Jan 29, 2017 | 2002 Toyota Camry

1 Answer

I have a 2010 Chevy impala LS instrument cluster and it has a 20 pin plug I'm trying to figure out which wire's on the back of the cluster are for the speed sensor, rpm, gas, and temp wires.


Boy your way off base . All the gauges are inputs from the ECM - engine computer . The VSS - vehicle speed sensor , ETC - engine coolant temp sensor , sending unit in the fuel tank , All this sensors input the engine computer . The PCM then sends this info on the GMLAN serial data bus ,communications network . The Instrument cluster has a microprocessor inside that translates this info an controls the gauges. You probably have an instrument cluster problem or a communication network problem . Your best bet is to take your vehicle to the dealer or some other qualified repair shop. Need to have it checked for DTC'S - diagnostic trouble codes.
Indicators and Warning Messages
Refer to Indicator/Warning Message Description and Operation.
Engine Coolant Temperature Gage
The instrument panel cluster (IPC) displays the engine coolant temperature as determined by the engine control module (ECM). The IPC receives a serial data message from the ECM indicating the engine coolant temperature. The IPC receives the coolant temperature information via serial data message from the body control module (BCM). The engine coolant temperature gage defaults to 60?°C (140?°F) or below if:
?€¢
The ECM detects a malfunction in the engine coolant temperature sensor circuit.

?€¢
The IPC detects a loss of serial data communications with the ECM.

?€¢
The IPC detects a loss of serial data communications with the BCM.
Fuel Gage
The instrument panel cluster (IPC) displays the fuel level as determined by the engine control module (ECM). The IPC receives a serial data message from the ECM indicating the fuel level percent. The body control module (BCM) sends the fuel level information from the ECM to the IPC via a serial data message indicating the fuel level percent. The fuel gage defaults to empty if:
?€¢
The ECM detects a malfunction in the fuel level sensor circuit.

?€¢
The IPC detects a loss of serial data communications with the ECM.

?€¢
The IPC detects a loss of serial data communications with the BCM.
When the fuel level is less than a pre-determined value, the low fuel indicator illuminates in the IPC.
Odometer
The vehicle odometer is calculated and stored electronically in the instrument panel cluster (IPC). The IPC contains a season odometer and trip odometer A or B. Momentarily press the trip/fuel button in order to toggle between the season odometer and the trip odometer. Press the set/reset button for greater than 0.25 seconds, while the trip odometer is displayed, in order to reset the trip odometer. The IPC displays the vehicle mileage and trip mileage as determined by the engine control module (ECM). The IPC calculates the mileage based on the serial data vehicle speed information from the ECM. The odometer will display 'error' if an internal IPC memory failure is detected. The odometer displays either miles or kilometers and can be set through the customization menu in the driver information center (DIC).
PRNDL Display
The instrument panel cluster (IPC) displays the selected gear position as determined by the engine control module (ECM). The IPC receives a serial data message from the ECM indicating the gear position. The PRNDL display blanks if:
?€¢
The ECM detects a malfunction in the transmission range switch circuit.

?€¢
The IPC detects a loss of serial data communications with the ECM.

?€¢
The IPC detects a loss of serial data communications with the body control module (BCM).
Speedometer
The instrument panel cluster (IPC) displays the vehicle speed as determined by the engine control module (ECM). The IPC calculates the mileage based on serial data vehicle speed information from the ECM. The IPC receives vehicle speed information from the body control module (BCM) via a serial data message. The speedometer defaults to 0 km/h (0 mph) if the IPC detects a loss of serial data communications with the ECM or BCM.
Tachometer
The instrument panel cluster (IPC) displays the engine speed as determined by the engine control module (ECM). The IPC receives a serial data message from the ECM indicating the engine speed. The IPC receives the engine speed information from the body control module (BCM) via a serial data message. The tachometer will default to 0 RPM if:
?€¢
The ECM detects a malfunction in the engine speed sensor circuit.

?€¢
The IPC detects a loss of serial data communications with the ECM.

?€¢
The IPC detects a loss of serial data communications with the BCM.

How to Diagnose Controller Area Network CAN Suggest you read up on C.A.N.

May 14, 2016 | Cars & Trucks

1 Answer

While driving antitheft light comes on and all the gauges go flat,car keeps runnig,want to disable system,not sure what to look for


Before doing something drastic ,have it checked out for DTC'S - diagnostic trouble codes . It may not be the anti-theft system ,gauges going flat would be more like a communication problem between modules . PCM / BCM / instrument cluster etc.. That also could cause theft light coming on . If your not sure what to look for ,take it to a ASE certified professional . You may render your vehicle useless if you don't know what your doing .
Serial Data Power Mode Master
On vehicles that have several control modules connected by serial data circuits, one module is the power mode master (PMM). On this vehicle, the PMM is the body control module (BCM). The PMM receives 3 discrete ignition switch signals to differentiate which power mode will be sent over the Serial Data circuits. The 3-wire Ignition Switch table below illustrates the state of these inputs in correspondence to the ignition switch position:
Serial Data Messages The modules that depend exclusively on serial data messages for power modes. stay in the state dictated by the last valid PMM message until they can check for the engine run flag status on the serial data circuits. If the PMM fails, the modules monitor the serial data circuit for the engine run flag serial data. If the engine run flag serial data is True, indicating that the engine is running, the modules fail-safe to RUN. In this state, the modules and their subsystems can support all operator requirements. If the engine run flag serial data is False, indicating that the engine is not running, the modules fail-safe to OFF-AWAKE. In this state, the modules are constantly checking for a change status message on the serial data circuits and can respond to both local inputs and serial data inputs from other modules on the vehicle.
Indicators and Warning Messages
Refer to Indicator/Warning Message Description and Operation .
Engine Coolant Temperature Gage
The instrument panel cluster (IPC) displays the engine coolant temperature as determined by the powertrain control module (PCM) or the engine control module (ECM). The IPC receives a serial data message from the PCM/ECM indicating the engine coolant temperature. The engine coolant temperature gage defaults to 38?°C (100?°F) if:
?€¢
The PCM/ECM detects a malfunction in the engine coolant temperature sensor circuit.


?€¢
The IPC detects a loss of serial data communications from the BCM.

Fuel Gage
The instrument panel cluster (IPC) displays the fuel level as determined by the powertrain control module (PCM) or the engine control module (ECM). The IPC receives a serial data message from the body control module (BCM) indicating the fuel level. The fuel gage defaults to E (empty) if:
?€¢
The PCM/ECM detects a malfunction in the fuel level sensor circuit.


?€¢
The IPC detects a loss of serial data communications from the BCM.

When the fuel level is less than 14 percent, the low fuel indicator illuminates.
Odometer
The instrument panel cluster (IPC) contains a season odometer and a trip odometer. Momentarily press the trip/reset switch in order to toggle between the season odometer and the trip odometer. Press the trip/reset switch for greater than 2 seconds, while the trip odometer is displayed, in order to reset the trip odometer. The odometer is calculated and stored electronically in the body control module (BCM). The BCM uses the vehicle speed information from the powertrain control module (PCM) to calculate the odometer. The odometer displays 'error' if an internal IPC memory failure is detected. The IPC stores a backup copy of the odometer value incase the IPC stops receiving a valid odometer value from the BCM.
Speedometer
The instrument panel cluster (IPC) displays the vehicle speed based on the information from the ECM/PCM. The IPC receives the vehicle speed information from the BCM via the serial data circuit. The speedometer defaults to 0 kmh (0 mph) when the following occurs:
?€¢
The powertrain control module (PCM) or the engine control module (ECM) detects a malfunction in the vehicle speed sensor circuit.


?€¢
The IPC detects a loss of serial data communication from the BCM.

Tachometer
The instrument panel cluster (IPC) displays the engine speed as determined by the powertrain control module (PCM) or the engine control module (ECM). The IPC receives a serial data message from the body control module (BCM) indicating the engine speed. The tachometer will default to 0 RPM if:
?€¢
The PCM/ECM detects a malfunction in the engine speed sensor circuit.


?€¢
The IPC detects a loss of serial data communication from the BCM.

Apr 07, 2016 | 2006 Pontiac G6

1 Answer

What would cause a code u1900 on a 2006 Ford Freestar?


The problem could be a wiring issue or connection problem at the instrument cluster. It also could be the instrument cluster is bad and has lost communication with engine control module.

Nov 04, 2014 | Cars & Trucks

1 Answer

Speedometer cable


CLuster speedo and odometer
both dead?
cable. or drive gears in tranny tripped.
easy to check. ?
sure.
at tranny cable free, spin it same direction as speedo needle.
speedo dont work (both odometer and speed) then the cable is bad.
if not work, tranny drive gears to cable stripped out. some are plastic

Jan 11, 2014 | 1990 Toyota Camry

3 Answers

98 Camry LE V6 Speedometer/Odometer and transmission shifting issue


if the speedo is not sending a speed the trans will go into back up mode and the trans will not shift normally check the speed sensor

Aug 28, 2012 | 1998 Toyota Camry

1 Answer

My 97 Camry speedometer goes off (to zero) as well as the odometer ONLY when the inside of the vehicle gets hot. In cool mornings it works fine but in hot afternoons,the LED goes off. Replaced the speed...


This may be hard to believe, but it is the circuitry in the instrument cluster. I have (2) 1997 Camry's and one of them had this problem. I swapped instrument clusters with the other camry, then the other camry had the problem.


Buy a used instrument cluster from a junkyard with a 30 day warranty and you should be good to go (though your mileage will be incorrect).

Jun 11, 2012 | 1997 Toyota Camry

1 Answer

On a 2001 ford taurus what is the exclamatin point on the dash? The light comes on and goes off at times.


Hope this helps.
df697aa.gif


Item Part Number Description 1 — Instrument cluster 2 — Odometer reset shaft 3 — Air bag warning indicator 4 — RH turn signal indicator 5 — Charging system warning indicator 6 — Tachometer 7 — Low oil pressure warning indicator 8 — Brake system warning indicator 9 — Cruise control indicator 10 — Check fuel cap indicator 11 — Anti-lock brake system (ABS) warning indicator 12 — Check transmission indicator 13 — Odometer 14 — Transmission range selector indicator 15 — Trip odometer 16 — Theft indicator 17 — Low coolant indicator (if equipped) 18 — Safety belt warning indicator 19 — Low fuel warning indicator 20 — Fuel gauge 21 — Malfunction indicator lamp (MIL) 22 — Door ajar warning indicator 23 — Traction control indicator (if equipped) 24 — Engine coolant temperature gauge 25 — High beam indicator 26 — LH turn signal indicator 27 — Speedometer

Jun 05, 2010 | 2001 Ford Taurus

1 Answer

Amber color light below the fuel meter


This is a warning light when the fuel quantity is low. If it is out, the cluster will need to be removed including disconnecting the Speedo cable and multiple electrical connectors. Replace the bulb. The bulb can be purchased at your local Toyota dealer.

Dec 11, 2009 | 1993 Toyota Camry V6

3 Answers

Odometer stopped working


IF YOUR SPEEDO IS WORKING THEN YOUR VSS IS OKAY, BAD VSS WILL STOP SPEEDO AND USALLY CAUSE HARD SHIFTING. NORMALLY ODO IS CONTROLLED BY SERVO MOTOR WHICH MAY HAVE WENT OUT. CHECK EBAY FOR REPAIR SERVICES OR SIMPLY GET A SALVAGE CLUSTER AND HAVE MILEAGE RESET

Jun 28, 2009 | 1998 Ford Mustang

Not finding what you are looking for?
2001 Toyota Camry Logo

580 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...