Question about 2006 Mitsubishi Eclipse

1 Answer

Instructions to replace the front brake pads - 2006 Mitsubishi Eclipse

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

You really should get the Chilton's or Haynes manual -- from the bookstore, or a library. At least, see if you can find instructions on the web. It's pretty simple, but things can vary from car to car. The basic steps are: chock the back wheels, loosen front lug nuts, jack the car, support it on stands, remove the wheels, remove or rotate the caliper (depends on the car), remove the pads, push the caliper piston in (again varies),put new pads on, reassemble.

But, you really should consult a manual for the specifics of your vehicle. Most libraries have them for FREE!

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size allen wrench do i need for the front brake calipers


For front brake pads replacement you only need usually wrench set, inclusive 7 mm allen key also. But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake automatic adjustment!!!
Instructions for front brake pads replacement.
For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow:
1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose!
2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper.
3. Now you must thoroughly clean the brake calipers (free of grease).
4. Remove outer brake pad from brake carrier.
5. Pull inner brake pad out of brake caliper piston.
6. Check up the brake fluid level on the reservor, and emptying if neccessary!
7. Push piston back into brake caliper housing.
8. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward).
9. Install outer brake pad into brake carrier.
10. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm.
11. Install both caps.
12. Insert retaining spring into brake caliper housing.

Important note: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!!
Check brake fluid level and top up as neccessary!

Sep 03, 2011 | 1994 Audi 100

1 Answer

I have a 2003 pt cruiser and my brakes keep screaming, my dad checked both the back and front brake pads/drums but said that they were fine but would soon need to change the front pads. he also said that...


Screaming brakes dont mean the fluid is low, the brakes squeaking is due to vibration of the pads and calipers, the brakes could be fine and still squeak, in order to rid the noise you would need to remove the pads and replace the pad hardware clips and then apply some anti squeal to backside of the pads,this helps almost always but some cars the pads are so glazed that they need replacing and rotors machined or replaced, if your dad said they were good for now then its safe. if the noise is something you wish to get rid of then follow the above instructions. good day.

Sep 03, 2011 | 2000 Dodge Caravan

1 Answer

Need to replace brakes on 2000 GMC Safari. does it have disc brakes all around or drum rakse in rear?


Disc brakes in the front and drum brakes in the rear. Make sure that you repack the front bearing's with wheel grease before finishing the job.If the front rotors and or the rear drums have a rough brake pad surface,get them resurfaced before installing new brake pads or brake shoes in the rear. you can go online or your public library for complete instructions on how to replace the brakes on that vehicle.

Apr 01, 2011 | 2000 GMC Safari

1 Answer

Step by step instructions on how to replace front break pads on a 2003 VW Passat


For front brake pads replacement you need only usually wrench set, inclusive 7 mm allen key also.
But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake automatic adjustment!!!
For front brake pads. First you must verify yours front brake disc diameter: 280 mm or 288 mm. After that you can buy the brake pads (with wear sensor). For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow:
1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose!
2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper.
3. Now you must thoroughly clean the brake calipers (free of grease).
4. Remove outer brake pad from brake carrier.
5. Pull inner brake pad out of brake caliper piston.
6. Check up the brake fluid level on the reservor, and emptying if neccessary!
7. Push piston back into brake caliper housing.
8. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward).
9. Install outer brake pad into brake carrier.
10. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm.
11. Install both caps.
12. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!!

Mar 10, 2011 | Volkswagen Passat Cars & Trucks

1 Answer

How do you put front brake pads on cadillac sedan deville 1996


Front brakes on all modern cars are disc brakes. The front brakes generally provide 80% of the stopping power, and so tend to wear faster than the rear. Replacing them - pads, rotors and calipers - is quite simple once you understand the process, and can save you a great deal of money. These instructions will include a full front brake replacement. Also, having a service manual for your vehicle will save your sanity, as well as time and money. If you only need pads, or pads and rotors, but not calipers, skip the steps for replacing calipers. Repeat the steps below for each side of the car as necessary.
Complete Directions

Jul 24, 2010 | 1996 Cadillac DeVille

1 Answer

Ho do i replace my a4 2004 front brake pads


IT IS VERY EASY TO REPLACE FRONT PADS IF U WANT ME TO WALK U THROUGH IT REPLY BACK EMAIL BIGGSONNY@GMAIL.COM

Apr 26, 2010 | 2004 Audi A4

1 Answer

Need to replace the front brake pads on a 2006 scion tc coupe


front is as same as gm, 2 on caliper do not forget to press caliper pistons back into themselves, then just take pads out and replace then, install and start car and press on brake to bring pressure back into caliper

Jun 22, 2009 | 2006 Scion tC

1 Answer

Instructions for replacing the front brake pads-2005 Hyundai Tucs


Jack the front of the car up, and make sure it is securely supported. Remove the wheel, remove the 2 guide bolts (located on the back of the caliper), and remove the caliper, hanging it by a coat hanger or wire to keep pressure off the brake line. Remove the pads and shims. Clean rotor with brake parts cleaner, and install new pads/shims. Repeat on other isde. Check with the parts store to see whether or not you need to use anti-squeak compound for your specific brake pads. Once you install them, you will need to bed the brakes to get the most use out of them. Accelerate to 30mph, then hard brake to zero (5-10 times), then repeat but to 60mph and hard brake to zero. Do this a couple times, and you will get very long life out of your brakes.

Apr 16, 2009 | 2005 Hyundai Tucson

1 Answer

2002 Honda Civic Front Brake Pad Change


autozone.com has the best available information that is at no charge. They give you step by step instrucions and pictures with exploded views. Once you do the brakes a time or two it will be a snap. At the site simply add your vehicle and go to vehicle repair guides. Hope this helps.

Mar 07, 2009 | 2002 Honda Civic

1 Answer

Front Brake Pad Change 2002 Honda Civic


Maybe this is a multiple post. The best available no charge is autozone. com When you go to the site, input your vehicle information and go to vehicle repair guides. They have step by step instructions and exploded views. Once you do the brakes a time or two it will be a snap. Hope this helps.

Mar 07, 2009 | 2002 Honda Civic

Not finding what you are looking for?
2006 Mitsubishi Eclipse Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...