Question about 1995 Eagle Talon

1 Answer

My 98 Eagle Talon goes in and of rough idle, studders under load "first gear" and seems to go out of time "hear knocking" but recovers before dieing. Problems persists until it reaches 2000 RPM's then quits. Any Ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,776 Answers

If the check engine light is on, take it to an autoparts store and have the computer scanned for fault codes. Most stores will not charge for the scan. The codes will help identify the problem. I would suspect a faulty knock sensor or throttle control valve, but the codes should help narrow the problem down. Hope this helped and best wishes.

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1996 eagle talon tsi (just bought) idles rough but when I drive its smooth, no rough idle. I need to know what is wrong with it and how to fix it


It may be a dirty air cleaner or a dirty Idle Airflow Valve . The IAC can be cleaned by taking off the duct work that goes from the air assembly to the fuel injector hole. The valve is to one of the sides of the hole just inside. You will see two small holes. Buy some card cleaner and with your engine running at about 1300 rpm spray the cleaner directly into these holes. Spray for a good 10 seconds. Stop the engine and let the cleaner soak in. Repeat this about 4 times. If it still idles rough it may be the Idle position sensor or you have to replace the IAC.

Nov 20, 2009 | 1996 Eagle Talon

1 Answer

My 93 eagle talen check engine light comes on now and then and idles rough then goes back ok, then sometime it idles ok but dies when accelerator is pushed, what do I check ??


Hello, in my opinnion I would take your car in to have an electronic diagnosis done, the cars computer will give a technician the answers. Experience has tought me not to fiddle, this usually leads to more problems. I hope this helps somewhat.

Nov 04, 2009 | 1993 Eagle Talon

1 Answer

Car starts then instantly dies


there is an idle control valve and an air flow meter that should be checked.check all the wiring harness and connectors to the crank and cam sensors.

Sep 15, 2009 | 1994 Eagle Talon

1 Answer

1993 eagle talon with 2L non torbo rough idling


This is a two part problems.

Part 1

Intake manifold and vacuum lines leak. It will take time to locate.
Carb, cleaner trick can save you 1/2 the time.

Part 2

Air intake tube leak.
It's easier to fix.

Locate air flow sensor.

Your problem can be the plastic tube between air flow sensor and engine intake opening.

The ECU computer read the air temp and density but the leaky tube ADDED more air and colder temp air into the engine.

WRONG data to ECU!

Seal the tube then take on the vacuum when you have time.

MAP and TPS can also be at fault.


Jul 15, 2009 | 1992 Eagle Talon

1 Answer

1993 Eagle Talon Tsi starts rough then dies off, bad timing?


First thing you can do to try a simple fix is replace each spark plug, check each plug for signs of fuel/air mixture

if your plug is black is rich, if ur plug is white is lean.

in this case repost your findings. in the mean time if they look golden or light brown, replace them and make sure they are gapped to ur level of psi you are running.

you can find the gap specs for how much boost you are running on most DSM websites or by searching.

Mar 27, 2009 | 1993 Eagle Talon

1 Answer

Engine Knock


hello it sounds like you oil pump is not supply enough oil from what your explaining it sounds like a connecting rod knock wich you will usually here under stress load with engine increase check your oil level on the car try to increase idle while holding your brake in gear then do the same in nuetral does the noise sound the same if it does you should have a compression test on each cylinder to rule out each cylinder goodluck

Sep 17, 2008 | 1997 Eagle Talon

2 Answers

91 eagle talon timing


if its only off by one tooth it won't cause any damage.

1830a1b.jpg fd60bd0.jpg 77050a3.jpg 68c3b94.jpg f16c4cb.jpg baaea06.jpg 21b24ae.jpg

May 19, 2008 | 1991 Eagle Talon

Not finding what you are looking for?
1995 Eagle Talon Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...