I am writing my abet maric axams so I need to find out what's my axam number

TORQUE ALL BOLTS PROPER SEQUENCE TO 14 FT LBS.THEN PAINT MARK ON THE OF EACH BOLT.USING MARK AS A REFERENCE TIGHTEN ALL THE BOLTS PROPER SEQUENCE AN ADDITIONAL 90 DEGREES.THEN TIGHTEN ALL BOLTS IN SEQUENCE ADDITIONAL 90 DEGREES. WRITE THIS NUMBER ON A PIECE OF PAPER. 8 4 1 5 AND UNDER THAT NUMBER WRITES THIS NUMBER UNDER THE NUMBER JUST GAVE YOU 7 3 2 6 THIS IS YOUR CYLINDER HEAD BOLT TORQUE SEQUENCE.

STANDING IN FRONT OF CAR.CYLINDERS FACING YOU FROM LEFT TO RIGHT IS 1 2 3 THIS INFORMATION I GAVE YOU FOR THE 3 CYLINDER 993 CC ENGINE. DRAW A CIRCLE ON PAPER WRITE DOWN THE NUMBER 3 ON TOP OF CIRCLE AND NUMBER 1 AND 2 UNDER THREE THATS YOUR DISTRIBUTOR WIRE LOCATION.NOW IF YOU HAVE THE 1295CC 4 CYLINDER ENGINE.STANDING IN FRONT OF CAR CYLINDERS FACING YOU LEFT TO RIGHT IS CYLINDERS 1 2 3 4 DRAW CIRCLE ON PAPER WRITE NUMBER 4 TOP OF CIRCLE WRITE NUMBER 1 BOTTOM OF CIRCLE.ON LEFT CIRCLE WRITE NUMBER 2 AND FROM RIGHT OF CIRCLE WRITE NUMBER 3 THATS ALL SPARK PLUG WIRES LOCATION ON DISTRIBUTOR WHILE STANDING FACING THE FRONT OF THE ENGINE.

turn ign on.radio must be in loc mode.hold down preset buttons 2 and 3 for 6 seconds.radio will change from loc to a 3 digit number.write this down you have 15 seconds to complete the next step.press the am-fm button radio will change to another 3 digit number.write this number to the right of the other numbers.call 1-800-537-5140 press1 then #(pound) you will hear invalid,try again.press 139010 or 106010 or 206010 or 202107 then # (pound) enter your 6 digit code followed by *(astric) listen for the 4 digit number and write it down.it will repeat twice.turn ign on radio should display loc.press mn and hr button and enter the 4 digit code.press am-fm radio should display sec it should now be unlocked. i think you need the number 106010 then #(pound) if not try all the numbers.

WELL YOU DID NOT GIVE ME THE YEAR AND MODEL OF YOUR CAR. WHEN YOU TORQUE THE HEAD BOLTS YOU WILL MAKE 4 PASSES. FIRST PAST 30 FT LBS / SECOND PAST 44 FT LBS / THIRD PASS PLUS 90 DEGREES / FOURTH PASS PLUS 90 DEGREES. YOU NEED TORQUE SEQUENCE GET A PIECE OF PAPER FROM LEFT TO RIGHT WRITE NUMBERS 10 4 2 6 8 ON THE SAME PAPER WRITE SECOND ROW OF NUMBERS UNDER THE FIRST I GAVE YOU WRITE NUMBERS LEFT TO RIGHT. 7 5 1 3 9 THOSE NUMBERS I GAVE YOU IS THE BOLT LOCATION YOU TORQUE HEADS USING THOSE SEQUENCE NUMBER TO TIGHTEN CYLINDER HEAD SO YOU WONT BOW THE HEADS.

FIRING ORDER IS 1 2 3 4 5 6 STANDING IN FRONT VECHICLE CYLINDERS TO THE LEFT SIDE ENGINE FACING YOU ARE 1 3 5 CYLINDERS ON THE RIGHT SIDE FACING YOU IS 2 4 6. NOW DRAW A LARGE CIRCLE TOP OF CIRCLE WRITE NUMBER 1 BOTTOM OF CIRCLE WRITE NUMBER 4 ON LEFT SIDE CIRCLE UNDER NUMBER1 WRITE NUMBERS IS 2 AND 3 ON THE RIGHT SIDE CIRCLE BELOW NUMBER 1 WRITE NUMBER 6 AND 5 THAT CIRCLE YOU DREW IS YOUR DISTRIBUTOR PLUGS LOCATION NOW YOU CAN PLACE PLUGS WIRES FROM DISTRIBUTOR TO THE RIGHT SPARK PLUGS LOCATION TO THE CYLINDER BLOCK.LET ME KNOW HOW IT WORKS OUT.

You must write down you VIN number. Also you may have to remove the radio to get the serial number and model number and write it down. Call the dealer or you may have to go to the mitsubishi dealer and provide this information and prove you own the vehicle for them to relenquish the information. At this time they will tell you what you would need to push in order to bring the radio back to life. Hope this helps.

Look in your owners manual or car delivery pack(manual and other papers were all in a plastic bag when vehicle was new). There may be a card with RADIO ANTI-THEFT CODE written on it, or sometimes they write it inside the front page of the owners manual. If you CANT locate the card, then look around the glovebox area for a sticker with 8 numbers on it. Those are the radio serial number. write them down and call your local dealership and tell them your battery died and you need the radio unlock number and they will ask for the radio serial number and then use that to generate the correct number. once you get the number, write it down in the manual and Id also recommend writing it on a sticker you can place in the glovebox in case it happens again it will never get lost and always be there.

I need the decode numbers you will need to get for me. press 2&3 together for 5 seconds, and then write down the three digit code within 7 seconds press am/fm button and then write down those three numbers now you have a 6 digit code. with this I can get you your unloock code.

Hello. This is what I need from you to unlock your radio. Press the number 2 and 3 preset button and hold until three numbers apear. Write those numbers down. Press the am/fm button and write those numbers down. Give me those numbers and I will get you the unlock code and directions how to input it.