SOURCE: need wiring information for harness on stock infinity cd player
Uhm need more information here.
SOURCE: 68 camaro aftermarket fuel gauge pegged passed full
Jess, Make sure you don't have the ground and sender level circuits crossed at the gauge. If the needle is pegs to full it indicates an open circuit, if the needle pegs to empty it is indicating a short to ground.
Let me know.
Regards,
SOURCE: my trailer wiring on my 2001 gmc sierra
First replace the trailer light brake/turn signal fuses. I have seen where the fuse will show good, but loose connection in the block. You can easily do it by using the flashers. Using a test light you can check power in and out of the fuse. Just touch the tester to the metal pin on top of the fuse... on both sides. Power in and power out. If power is there on both sides and still nothing below the fuse box, the box is bad. Not a common problem. Also check http://www.etrailer.com/faq-wiring.aspx.
SOURCE: Fuel gauge/temp gauge not working
There are two sensors, one for ECU temp. readings with two pin connector and other one with only one wire, which has been probably disconnected when you replaced the CPC solenoid - very close position.
31 views
Usually answered in minutes!
×