Do I need to remove the gear box to replace the slave cylinder on my ford falcon xr6?

SOURCE: hydraulic clutch slave cylinder leaks needs replacement

you sure can replace it. I suggest checking out autozone.com for a free online repair manual with step by step directions and diagrams

SOURCE: slave cylinder is it on inside of gear box or outside TDi 4

2001 reg the slave cylinder is inside the bell housing of the gearbox which means the gearbox needs to be removed not an easy diy job

SOURCE: 2001 Ford ranger edge. The gears won't change.

CLUTCH SLAVE CYLINDER IS IN THE TRANSMISSION GOING TO PRESSURE PLATE AND CLUTCH.YOU HAVE TO DROP TRANSMISSION TO GET TO SLAVE CYLINDER.IF CLUTCH IS LOOSE MAKE SURE BOLTS TO CLUTCH PRESSURE PLATE TO CLUTCH IS TIGHT.THAT COULD BE YOUR PROBLEM.

SOURCE: How do you replace the slave cylinder on a 1992 f150?

It is not usually necessary to replace the slave cylinder. Remove the cylinder and wash in metho. Exmine it for rust, pitting or grooving. If ok scuff the glaze from the cylinder walls with 320 grit w&d paper and more metho. Wash well with metho dry and fit a new kit of rubbers. Lubricate these with brake fluid ot rubber grease as you assembe. Refit the slave cylinder and bleed out the air. Job done.

Marvin

• 85242 Answers
• Posted on Aug 24, 2012

SOURCE: my ef falcon xr6 wont change into 4th gear any idea why?

Duplicate question.