Question about 1997 Dodge Neon

1 Answer

The car will crank but no fire!

I checked the coil and autozone said they were good crank sensor was replaced but it was used what could it be i need help

Posted by on

  • carl May 11, 2010

    Was there a code from check engine light. How did they check the coils. and did they you have the ingnition module checked. Most Dodge crank sensors are best bought new and oem from dealer. Learned my lesson on that years ago.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 105 Answers

Check your ecm which is your computer brain that tells the car what to do with electronic impulse signals. also no fuel is reaching fuel rail and injectors. also check your wiring around your spark plug boots too.

Posted on Jul 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2005 ford freestyle it won't start has fuel no spark it has individual coils for each plug is there a pick up cool or something to check


i had this on my 05 freestar, and needed to replace the coil pack. it controls all the spark and there is no pick-up coil. about 85 bucks @ autozone

Feb 24, 2015 | 2005 Ford Freestyle

1 Answer

No fire from coil- replace crank sensor, fuel pump relay , new spark plugs


If you have fire going into coil and not coming out than replace coil pack. They can become weak and will cause firing to be muted. Coil should read about 13ohms with an electrical tester when disengaged from the cars power supply set on 20+ohms. Anything less needs replacement.

Sep 04, 2014 | 1994 Lincoln Town Car

1 Answer

Troubleshooting engine


Yes you are heading in right right direction. Check to see if there is spark out of coil. Spark at coil means replace distributor or rotor. No spark at coil replace ignition module or crank sensor good luck. Oh yea crank sensor is cheaper i would try that first if there is spark out of coil.

Apr 18, 2014 | 2001 Ford Explorer Sport

1 Answer

1996 ford ranger 2.3 coil not firing


Check and see if you have a Camshaft sensor. Also check your wires to the crankshaft sensor connector to see if they are broken. Go to Autozone.com for a wiring and fusebox layout for free. Just register your truck.

Could be that you have a relay for each coil and one is bad. If so, sometimes Ford uses the same relay many times and the horn relay may interchange. You can use the horn to test the switched relay.

May 28, 2012 | Ford Ranger Cars & Trucks

1 Answer

I need answer for truck not firing. On. A 1991. SERRIA 1500 TRUCK 5.0 LITER


Several things can cause this problem, cracked distributor cap, old ignition rotor. Or if you have coil packs, cracked coil pack, ignition control module, crank position sensor, cam position sensor. Coil pack parts and sensors can be checked by autozone, cap and rotor will have corrosion on the rotor, however a small crack in the distributor cap can be next to impossible to see, replacement is usually best option.

Feb 16, 2012 | 2000 GMC New Sierra 1500

1 Answer

The car will crank but does not have fire going to the coil pack


did you do a spark test?
This could be a number of things, your crankshaft sensor, coils or ignition module.
check the coils
  1. Remove the ignition coil(s).
  2. Using an ohmmeter, check the resistance between the primary terminals on the underside of the coil. The resistance should be 0.50-0.90 ohms.
  3. Check the resistance between the secondary terminals. It should be 5,000-10,000 ohms.
  4. If the coil failed either test, replace the coil.

Jul 25, 2009 | 1995 Chevrolet Cavalier

Not finding what you are looking for?
1997 Dodge Neon Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...