Question about 1995 Chevrolet Blazer

1 Answer

My low beam head lighjts do not work but the high

My low beam head lights do not work but the high beam does...bulbs are ok

Posted by on

  • twitterme Jul 25, 2009

    one other thing did come to mind

    I was checking the low beams ( when it was still working ) and when i would move the telescoping steering wheel they would dim and then they would work when the wheel was in lock position

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 2,007 Answers

If you are absolutely certain the bulbs are okay, then change the switch. I would check for power at the socket first, to make sure it isn't bulbs.

Posted on Jul 25, 2009

  • Dar
    Dar Jul 25, 2009

    Okay, then you have a broken wire somewhere in the steering column. You'll have to pull the switch out, and check the wires. They do stick out the bottom , too, so maybe you can find the broken one at the bottom of the column. Let me know how you make out.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I have a 2006 civic SI. DRL indicator is on, driver side low and high beam ok. Passenger side low beam ok but DRL and hi beam not working. Any help is appreciated.


When either the high or low beam light is out in either side, DRL (daytime running lights) indicator will come on. When one bulb goes out, that's a clue the opposite bulb will burn out soon, so its best to replace both bulbs. If it was a fuse issue, both left and right side would be out. If driver side is OK but passenger side is not, then its a bulb issue. A 2006 Honda civic takes 9006 (HB4) low beam bulbs and 9005 (HB3) high beam bulbs. Cheapest is online from Walmart site-2-store. After procuring, wear latex, vinyl, or ANY gloves to keep your (corrosive) oil skin from coming in contact with headlight glass bulbs. Your skin oil will chemically react and cause shorter life span on glass bulbs. Instruction don't tell you this, so you handle with your hands, then need to replace bulbs 3 years later instead of 5 years (or more) in the future. With gloves on, pop the hood and look behind each headlight. Turn counter clockwise to unlock headlight bulb holders. Its a quarter to half turn to unlock bulb holder lock. Replace one bulb at a time so you don't confuse high beam from low beam. The wire has a tab you need to lift to pull out & disconnect wire connector. You might need a slim narrow-**** (NOT phillips) screwdriver to lift the tab; or use your house key. Snap the wire connector to the new bulb, then twist into headlight housing to secure bulb holders, then move on to the next bulb to repeat the procedure. Pict below, 9005 high beam is on the left, 9006 low beam is on the right. Handle by grasping the plastic base, not the glass bulbs. The raised potrusion on the bottom center is where the tab locks onto wire connector. Replace all 4 bulbs now, but in the future, its likely the low beam will wear out before the high beam. In the future, replace only the pair, not all 4. The factory installs inferior bulbs that go out sooner, hoping you'll take to dealership and they ******** you with higher parts-n-labor fees. As opposed to Walmart online site-2-store, it would cost you AT LEAST triple in parts & labor from dealership to replace all 4 headlight bulbs :-(
45d1f6ac-2983-42b9-a46c-30ef441b89e7.jpg

Nov 29, 2013 | 2006 Honda Civic

2 Answers

2001 suburban


Well the high and low beam lamps use the same fuses, and the dimmer switch handles the ground circuit. So I would check the dimmer switch if both high beam bulbs are ok.

Jul 23, 2013 | Cars & Trucks

1 Answer

2002 gmc safari head light won't work on low beam but will work on high beam


First check, is there more than one headlight bulb, if so, the low beam bulb has failed, needs replacing.

If not you'll probably find that the head light bulb has a double filament, low and high beam. The low beam filament has failed. You have to replace the bulb.

Dec 24, 2010 | GMC Safari Cars & Trucks

2 Answers

My low beams keep shutting on and off but high beams are fine


this could be solved by taking the bulb out of its holder and cleaning the contact of the bulb and holder.
turn the ignition on after this with the bulbs in the holder and plugged in but not in the headlight kitself.Turn the lights on and see if the work if still the same try moving the bulb while on in its older and see if its just loose. if so holding it one way it will work. wedge something something to hold it in place or buy a used bulb holder.
Check the fuses at the same time and the wire plug that powers the bulb. check and clean the contacts of these also
Let me know how it goes and ill help again if it persists.
bakerboy11@hotmail.com
Automobile

May 17, 2010 | 1994 Dodge Ram

1 Answer

I own a 1995 honda odyssey minivan and the drivers front head light is not working because of the wire connection? what do i do to fix this problem because I got stop for having only one headlight? thank...


hello annette from uk you think it may be connection ?? is head light not working on dipped beam? but high beam ok ? if so it may well be the low beam element in h/light bulb has blown however you could also check the fuse as each side head and sidelights have their own fuse check handbook for position of fusein box if ok then you can try the other head light bulb from other side into the plug connector of drivers side and if this works on high+low beams ? your old bulb is blown feel sure you can do these checks !? approx price of new bulb in uk £4 -50 but carry out above checks !st b 4 you buy bulb ? if it is a bad connection on plug ? another bulb will have same problem hope you understand all above ? and wish you good luck from n/west uk

Oct 30, 2009 | 1995 Honda Odyssey

3 Answers

High beam headlights quit working. Bulbs are OK.


If your getting power at the headlight wire harness, then it's going to be the bulb it self, but make sure your checking the right 12 volt terminal at the plug. There should be three terminals there, there is a ground, 12 volt low beam, and a 12 volt high beam. If both the low and high 12 volts are getting power, then it's going to be the head light bulb it self that has reached the end of it's life time since the day time running lights are always on which is the high beams. Good luck and check the fuse box under the hood by the battery. 

Aug 25, 2009 | 2003 Pontiac Sunfire

1 Answer

1999 Chevrolet Astro Van problem


the head lights have tree wires goig to it one groun one gets power when high beams on the 3rd gets power only with low beam on test the wires or try by plugin a good known head light to conector if it works with low beam then replace both head ligts because head light come with two bulbs in one high and low

Jun 02, 2008 | 1999 Chevrolet Astro

Not finding what you are looking for?
Cars & Trucks Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...