Question about 1995 Chevrolet Cavalier

1 Answer

The car will crank but does not have fire going to the coil pack

The car will crank but does not have fire to and from the coil packwhich allows fire to the crank sensors.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

Did you do a spark test?
This could be a number of things, your crankshaft sensor, coils or ignition module.
check the coils

  1. Remove the ignition coil(s).
  2. Using an ohmmeter, check the resistance between the primary terminals on the underside of the coil. The resistance should be 0.50-0.90 ohms.
  3. Check the resistance between the secondary terminals. It should be 5,000-10,000 ohms.
  4. If the coil failed either test, replace the coil.

Posted on Aug 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No fire from coil- replace crank sensor, fuel pump relay , new spark plugs


If you have fire going into coil and not coming out than replace coil pack. They can become weak and will cause firing to be muted. Coil should read about 13ohms with an electrical tester when disengaged from the cars power supply set on 20+ohms. Anything less needs replacement.

Sep 04, 2014 | 1994 Lincoln Town Car

1 Answer

2000 pontaic montana wont spark


likely a bad crank sensor or bad ignition module, coil packs can go bad
to but not normally all three at the same time.if the coil packs look ok
then i would look at what tell it to fire witch is the crank sensor, the cam sensor should tell the injectors when to fire, but thats not to say they couldn't be linked in some vehicles needing singal from both for fuel
and fire to work. hope this helps

Feb 16, 2013 | 2000 Pontiac Montana

1 Answer

No fire in coil pack.


Was the timing chain damaged ?
Did you have spark from the coil before you replaced the other parts ?
Do you have battery voltage on the positive side of the coil with the key on and in crank mode ?
Is the coil wire not sparking, or are you not getting spark at the plugs ?
Is the distributor rotor turning when you crank the engine ?

Jul 20, 2012 | 1994 GMC Safari

2 Answers

Changed coil pack that wasnt firing started fine


check the fire to the coil pack if it's present then check the pulse to the crank sensor

Jan 14, 2010 | 1999 Pontiac Firebird

1 Answer

My 3.0 ranger cranks but will not start is not getting fire to plugs changed coil pack cps crank senser what else could it be


Sounds to me like a bad control module. The control module controls the order of which the coil pack fires. If that is bad you get no spark. Seems to me that it should have been your second option right after replacing the coil pack.

Dec 07, 2009 | 1999 Ford Ranger SuperCab

Not finding what you are looking for?
1995 Chevrolet Cavalier Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...