Question about Hyundai Cars & Trucks

2 Answers

Where is the knock sensor located on a 2011 2.4 engine hyundai sonata?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Loyalty:

    Visited the website for 30 consecutive days.

  • Master
  • 162 Answers

On-Line Service Manual is available on the following website:

http://www.hsguide.net/hyundai_sonata_yf_2011_year_service_manual-6.html

Hyundai Sonata: Knock Sensor (KS). Repair procedures:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to "Intake And Exhaust System" in EM group). 3. Disconnect the injector connector (A). 4. Remove the installation bolt (B), and then remove the sensor from the cylinder block. Where is the knock sensor located on a 2011 2.4 en - syffl0041n.gif

Installation
caution_icon_eng.gif • Install the component with the specified torques. • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing. 1. Installation is reverse of removal. Knock sensor installation bolt: 18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft) Where is the knock sensor located on a 2011 2.4 en - knock sensor-m3h04eiq4trf45oprzz0vy4e-2-0.jpgs/images/knock sensor-m3h04eiq4trf45oprzz0vy4e-2-0.jpg" alt="knock sensor-m3h04eiq4trf45oprzz0vy4e-2-0.jpg" class="h_mi" />

Knock Sensor/Parts are available on the following website:
http://www.partsgeek.com/ymm/2011/hyundai/sonata.html?category=engine_electrical&part=knock_sensor

Posted on May 22, 2017

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Hyundai Master
  • 1,038 Answers

It is located on the engine block, but they rarely go bad, especially as new as 2011. What are your symptoms? Avoid buying parts you don't need. Did you perform an OBDII scan?

Posted on May 22, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

maklean
  • 1665 Answers

SOURCE: Knock sensor location

Knock Sensor Description addthis_pub = 'car-suff'; button1-bm.gif parts-box-top-lft.gif parts-box-top-rt.gif knock-sensor.jpg parts-box-rt.gif parts-box-btm-lft.gif parts-box-btm-rt.gif A quality Knock Sensor is more important than ever thanks to today’s increasing gas prices. Your Engine Knock Sensor enables your vehicle to obtain the optimum combination of timing and fuel/air mixture to generate power and efficiency and that means less wasted gas. Our guaranteed low prices make us your one-stop Knock Sensor Location. Regardless of the brand, make or model car, truck, van or SUV you drive, we make it easy to locate the application specific Knock Sensor that’s perfect for your vehicle. Our state of the art parts locating system puts you just a few mouse clicks away from the Knock Sensor you need and at a price you cannot beat anywhere. Click. Click. Click. And you are there. In addition to robbing you of fuel economy and performance a faulty Knock Sensor can cause expensive damage to your engine. Remember, the Knock Sensor keeps fuel from detonating in the cylinder … exploding rather than quickly burning as it should. If not replaced a faulty Knock Sensor can quite literally cause hundreds if not thousands of dollars in damage. There is really no need to look any further to find the Knock Sensor that’s application specific for your car, truck, van or SUV – high performance or family vehicle. We’ve got guaranteed low prices and shipping that other suppliers envy. Give us a try, we think you’ll be happy … in fact we guarantee it.

Posted on Jun 20, 2008

  • 90 Answers

SOURCE: LOCATION OF IAT SENSOR

hi
it was internal sensor in the MAF sensor
the MAF is MASS AIRFLOW SENSOR
locate in the engine intake hose near the air filter .

with my best wishes

Posted on Jul 31, 2008

alicantecoli
  • 22483 Answers

SOURCE: crank sensor location on Hyundai Sonata 2003 model

look carefully on bellhousing and rocker cover/head it has to be somewhere

Posted on Apr 03, 2009

ghost45
  • 1280 Answers

SOURCE: Locating and changing spark plugs on 2007 Hyundai Sonata 4 cylinder

They are directly below the coil packs (10mm bolts).


a73d0bb.jpg

Posted on Oct 25, 2009

SOURCE: My mechanic is having trouble locating the

hi,
i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.c9acd5a.jpg

Posted on Feb 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 Hyundai Sonata check engine light


It could be something else but this is a 2011, There pretty much right on with the codes now a days. The pressure sensor for the manifold shouldn't be that hard or expensive to replace. Unfortunately is an electrical part, that's the biggest problem. Good Luck

Oct 12, 2016 | 2011 Hyundai Sonata

1 Answer

2011 hyundai sonata won't start. battery seems fine. loud clicking/knocking when i turn the key. would it be the starter?


Unusual for the starter to fail on a one year old car.
You are having it towed to a dealer for warranty repairs, right ?

Jul 01, 2012 | 2011 Hyundai Sonata

1 Answer

2006 hyundai sonata I need to replace the knock sensor?


I have a 2006 Hyundai Sonata GLS V6. I was told there's 2 on my vehicle. Is that true? If so does anyone know where they both are? Thanks guys!

Jun 09, 2012 | 2006 Hyundai Sonata

1 Answer

2011 hyundai sonata 2.4 pcv location


In order to locate the location of PCV Value, then check out this video which will guide you to replace the PCV Valve Check/Replacement in Hyundai Sonata 2011, so have a look


Apr 12, 2012 | 2011 Hyundai Sonata 2.4

2 Answers

I can't find the location of the crankshaft postion sensor in my 2000 Hyundai sonata


My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.

-- begine excerpt from 2000 Hyundai Sonata Repair guide --

The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.

--- end excerpt from 2000 Hyundai Sonata repai guide ---

Dec 29, 2010 | 2000 Hyundai Sonata

1 Answer

Wheres the knock sensor


remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley

Feb 20, 2010 | Hyundai Motor 2004 Sonata

1 Answer

Where is the knock sensor located on a 2006 sonata?


The knock sensor i think is on the back of the engine block,Has a 10mm bolt holding it on.

Jul 09, 2009 | 2006 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,063 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

Jonah Oneal

Level 3 Expert

14065 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...