Question about Dodge Intrepid

1 Answer

I have a 2000 intrepid 2.7 I replaced the water pump and set the timing as the book showed me but now it will not start only if I unplug the cam sensor it will start and also the check ing lite comes on and the code is po340 and I replaced the cam sensor with a new one and the problem is still there

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 14,036 Answers

PO340 IS NO CAMSHAFT POSITION SENSOR CIRCUIT FAILURE.YOUR CAR IS GOING TO HAVE BE REPROGRAMMED BEFORE PCM WILL RECOGNIZE THE NEW CAMSHAFT SENSOR.

Posted on Jul 25, 2009

  • ilovetokick8
    ilovetokick8 Dec 21, 2012

    I do not believe that you have to reprogram the PCM. I have never heard of a car that you have to reprogram the PCM for a simple CMP replacement. As well as I checked alldata and it did not mention anything about a reprogram.

  • tim S
    tim S Apr 29, 2014

    I have this same problem has anyone figured it out

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace timing chain on 2001 dodge intrepid 2.7


It's a BIG job. It requires removing everything from the top of the engine (intake manifold, throttle body, all plumbing, valve covers) then removing the harmonic damper, most of the accessories, and then the timing cover. That's just to get to the timing chain. You have to remove the chain guides and tensioner, then cam gears and crank gear. If you're going this route, also replace the two chains (intake cam to exhaust cam) on top of the heads, the water pump, and the tensioners. Be very precise in reinstalling the three timing chains so that everything is in time.
The link shows the details of the chain itself, but be aware that your engine is packed into your Intrepid with limited work space in some areas.
Chrysler Sebring Concorde 300 2 7L timing replacement Cloyes kit 9 0397SA

Aug 20, 2017 | Dodge Cars & Trucks

1 Answer

How do i change a water pump on 2001 dodge intrepid?


This vehicle has a double overhead cam engine. The water pump is driven off the timing chain. Unless you have had experience doing internal engine repairs, this is not a DIYer job. There is great risk of doing more damage than good if any step(s) of the repair procedure are not done correctly.

Aug 30, 2014 | 2001 Dodge Intrepid

1 Answer

I have a bad water pump in my 1997 dodge intrepid 3.5l . where do I start ???


The water pump is driven from the timing belt, which would need to be replaced also.
You would need a repair book or shop manual for the procedures.

Jan 29, 2013 | Cars & Trucks

1 Answer

My 2000 2.7 intrepid is having to turnover for about 4 seconds to start i replaced the cam shaft position senseor it wont start if i unhook the sensor it starts


change the sensor its probably a safty feture bult into the car thats why i hate modern cars for this reason lol

Sep 21, 2012 | Cars & Trucks

1 Answer

2002 dodge intrepid. where is the water pump located


The first thing EVERYONE needs to do is BUY THE BOOK for your car. Haynes makes good ones. I am a single mom and replaced a valve in my 84 Chevy Celebrity and most recently replace a water pump in my 2002 Intrepid using the book. If you have to ask where something is on your motor you have no business even looking under the hood. BUY THE BOOK so you can at least be familiar with your car so when a mechanic starts rattling of his mechanic mumbo jumbo you can look it up and maybe even do it yourself!!

Nov 06, 2010 | 1997 Dodge Intrepid

1 Answer

How do i set timing on 2000 dodge intrepid, i had to put water pump on now i need the timing set,


i number 1piston which is the front one on the passenger side has to be all the way up and then 60 degrees past that, there is a mark on the crank that matches up with an arrow on the oil pump housing, the driver side cam sprocket has an arrow on it, and the passenger side cam sprocket has a hole in it which is its timing mark, on the chain there are 4 gold link, a single gold link goes on the crank timing mark, a single gold link goes on the passenger cam sprocket timing mark, and the double gold links match up with the driver side cam sprocket timing mark

Aug 14, 2010 | 2000 Dodge Intrepid

1 Answer

How to you install a water pumpon a 3.5 97 dodge


Remove the hood bracket bar, 4bolts, then the fan shroud assembly, then the belts, belt adjuster, and timing covers, line up the cam gears, crank gear to the marks , cam has 1 dot, they line up to timing housing 2 dots, (single dot to middle of the 2 dots), crank has 1 dot to mark on the oil pump housing to your right of crank gear, thats TDC. now remove the timing belt tensioner, 2 bolts, and remove the belt, if the pump has leaked, replace the belt, and tensioner if it is NOT metal Pulley, the fibre one will break down from the antifreeze. its a good idea to replace the water pump housing orings behind it, ac bracket has to come off, as the right cam on engine, this not a retiming iussue with the gear. GOOD LUCK. RDJRP

Aug 17, 2009 | 1997 Dodge Intrepid

3 Answers

2002 dodge intrepid starting issue new water pump,new timing chain,new belts, good spart, valves are good Can it be a crankshaft sensor?


dear friend-if you are positive that all the repairs were carried out with great care,that the timing is right,and you got spark and fuel,all the valves close propely,then it should start,if the sensor was ok before you stripped the engine why should it be faulty now.

Jun 29, 2009 | 2000 Dodge Intrepid

1 Answer

My 2000 dodge intrepid will not start, just goes around and around.


YOU MOST LIKE HAVE VALVES CONTACTING PISTONS AND NOT ALLOWING ENGINE ROTATION..A 2.7 ENGINE IS AN INTERFERENCE ENGINE AND IF GOES OUT OF TIME WILL DAMAGE VALVES AND/OR PISTONS

May 31, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...