Question about Cars & Trucks

Open Question

Cant get my 334 to walk fast everything else works fine just can't get him speed to work

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why did my 99 dodge grand caravans speedometer stop working?


Best guess :Check the speed sensor on the transmission, these fail.

Jul 21, 2014 | 1999 Dodge Caravan

1 Answer

I have a 1986 GMC 1500 with a 5.0 and stock rochester carb. The truck will start but you must keep gassing it as it won't idle. It kicks off every time. Any suggestions on how to fix this cold natured


fast idle speed screw, works off the fast idle cam which the choke adjustment sets, it works together by linkages. This is the raised idle speed setting you need to keep a cold engine running. First you set the idle speed by the idle speed screw with engine at normal operating temperature. Then you set the linkage up so the cam is on a raised step, throttle will be held on that raised step. then you can turn the idle speed screw to get idle at about 1500-1800 rpm. Now when you start engine cold, choke will set the fast idle cam on that raised step- when engine starts and runs it should be running at your fast idle setting. That's how it supposed to work, you just have to get everything adjusted right. I hate carburetors, they never stay adjusted right. Considering their complexity and small mechanical parts, no wonder.

Dec 24, 2013 | 1986 GMC C1500

1 Answer

K5 blazer starter


If you did not drain the fuel all the way or put a stabilizer in the fuel then you have gummed up lines for one thing. The other noises are not really concerning.

Dec 02, 2013 | Cars & Trucks

1 Answer

88 isuzu 4x4 Truck 2.6L. Starts then dies in 2 sec on cold start.


I would try cleaning the throttle valve body and also the automatic idle speed control valve mounted to the throttle body, this is a common symptom of a dirty throttle valve and idle speed control valve. Use a product called "CRC" Throttle valve cleaner, run the engine and spray it into the air intake of the engine with the supply hose removed, hold the throttle up while you do this as it will try to stall, use up about half the can and then shut it down and disconnect the battery NEGATIVE cable for 5 min's to reset the system learned strategy, drive it for a few days and see if this corrects the problem.

Apr 14, 2017 | Isuzu Pickup Cars & Trucks

1 Answer

Cant tell how fast you are driving


Check to see if the radio was wired correctly, and if that's not the problem, check behind the gauges to see if the speed sensor came out

Jan 05, 2010 | 1998 Chevrolet Lumina

1 Answer

Grinding noise on 2002 Olds Bravada


Try making tight turns to the right and then to the left. see if the grinding noise comes and goes. It could be your C/V joint and they need to be replaced. The noise will only come when your making the tight turns, you don't have to go fast. Walking speed will do and you can hear it with the window open or someone walking beside the Bravada. Good luck and keep me posted. Be glad to help.

Jun 16, 2009 | 2000 Oldsmobile Bravada

1 Answer

Lights on dashboard 2002alero GL


fuse box should have indications to all fuses if fuses r fine check underneath the hood...if they r all good could b just light bulbs or shortage in wiring which goes under the dash

Dec 17, 2008 | 2002 Oldsmobile Alero

1 Answer

Windshield wipers stopped working


quite possibly and most likely your problem is in the switch itself and needs replaced hope that helps you

Aug 20, 2008 | 1993 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...